[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230824114618.877730-6-danishanwar@ti.com>
Date: Thu, 24 Aug 2023 17:16:18 +0530
From: MD Danish Anwar <danishanwar@...com>
To: Randy Dunlap <rdunlap@...radead.org>,
Roger Quadros <rogerq@...nel.org>,
Simon Horman <simon.horman@...igine.com>,
Vignesh Raghavendra <vigneshr@...com>,
Andrew Lunn <andrew@...n.ch>,
Richard Cochran <richardcochran@...il.com>,
Conor Dooley <conor+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Jakub Kicinski <kuba@...nel.org>,
Eric Dumazet <edumazet@...gle.com>,
"David S. Miller" <davem@...emloft.net>,
MD Danish Anwar <danishanwar@...com>
CC: <nm@...com>, <srk@...com>, <linux-kernel@...r.kernel.org>,
<devicetree@...r.kernel.org>, <netdev@...r.kernel.org>,
<linux-omap@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>
Subject: [PATCH v7 5/5] net: ti: icssg-prueth: am65x SR2.0 add 10M full duplex support
From: Grygorii Strashko <grygorii.strashko@...com>
For AM65x SR2.0 it's required to enable IEP1 in raw 64bit mode which is
used by PRU FW to monitor the link and apply w/a for 10M link issue.
Note. No public errata available yet.
Without this w/a the PRU FW will stuck if link state changes under TX
traffic pressure.
Hence, add support for 10M full duplex for AM65x SR2.0:
- add new IEP API to enable IEP, but without PTP support
- add pdata quirk_10m_link_issue to enable 10M link issue w/a.
Signed-off-by: Grygorii Strashko <grygorii.strashko@...com>
Signed-off-by: Vignesh Raghavendra <vigneshr@...com>
Reviewed-by: Roger Quadros <rogerq@...nel.org>
Reviewed-by: Simon Horman <horms@...nel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@...el.com>
Signed-off-by: MD Danish Anwar <danishanwar@...com>
---
drivers/net/ethernet/ti/icssg/icss_iep.c | 26 +++++++++++++++++++
drivers/net/ethernet/ti/icssg/icss_iep.h | 2 ++
drivers/net/ethernet/ti/icssg/icssg_config.c | 7 +++++
drivers/net/ethernet/ti/icssg/icssg_prueth.c | 27 ++++++++++++++++++--
drivers/net/ethernet/ti/icssg/icssg_prueth.h | 2 ++
5 files changed, 62 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/ti/icssg/icss_iep.c b/drivers/net/ethernet/ti/icssg/icss_iep.c
index bcc056bf45da..4cf2a52e4378 100644
--- a/drivers/net/ethernet/ti/icssg/icss_iep.c
+++ b/drivers/net/ethernet/ti/icssg/icss_iep.c
@@ -727,6 +727,32 @@ void icss_iep_put(struct icss_iep *iep)
}
EXPORT_SYMBOL_GPL(icss_iep_put);
+void icss_iep_init_fw(struct icss_iep *iep)
+{
+ /* start IEP for FW use in raw 64bit mode, no PTP support */
+ iep->clk_tick_time = iep->def_inc;
+ iep->cycle_time_ns = 0;
+ iep->ops = NULL;
+ iep->clockops_data = NULL;
+ icss_iep_set_default_inc(iep, iep->def_inc);
+ icss_iep_set_compensation_inc(iep, iep->def_inc);
+ icss_iep_set_compensation_count(iep, 0);
+ regmap_write(iep->map, ICSS_IEP_SYNC_PWIDTH_REG, iep->refclk_freq / 10); /* 100 ms pulse */
+ regmap_write(iep->map, ICSS_IEP_SYNC0_PERIOD_REG, 0);
+ if (iep->plat_data->flags & ICSS_IEP_SLOW_COMPEN_REG_SUPPORT)
+ icss_iep_set_slow_compensation_count(iep, 0);
+
+ icss_iep_enable(iep);
+ icss_iep_settime(iep, 0);
+}
+EXPORT_SYMBOL_GPL(icss_iep_init_fw);
+
+void icss_iep_exit_fw(struct icss_iep *iep)
+{
+ icss_iep_disable(iep);
+}
+EXPORT_SYMBOL_GPL(icss_iep_exit_fw);
+
int icss_iep_init(struct icss_iep *iep, const struct icss_iep_clockops *clkops,
void *clockops_data, u32 cycle_time_ns)
{
diff --git a/drivers/net/ethernet/ti/icssg/icss_iep.h b/drivers/net/ethernet/ti/icssg/icss_iep.h
index 9c7f4d0a0916..803a4b714893 100644
--- a/drivers/net/ethernet/ti/icssg/icss_iep.h
+++ b/drivers/net/ethernet/ti/icssg/icss_iep.h
@@ -35,5 +35,7 @@ int icss_iep_exit(struct icss_iep *iep);
int icss_iep_get_count_low(struct icss_iep *iep);
int icss_iep_get_count_hi(struct icss_iep *iep);
int icss_iep_get_ptp_clock_idx(struct icss_iep *iep);
+void icss_iep_init_fw(struct icss_iep *iep);
+void icss_iep_exit_fw(struct icss_iep *iep);
#endif /* __NET_TI_ICSS_IEP_H */
diff --git a/drivers/net/ethernet/ti/icssg/icssg_config.c b/drivers/net/ethernet/ti/icssg/icssg_config.c
index ab648d3efe85..933b84666574 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_config.c
+++ b/drivers/net/ethernet/ti/icssg/icssg_config.c
@@ -210,6 +210,10 @@ void icssg_config_ipg(struct prueth_emac *emac)
case SPEED_100:
icssg_mii_update_ipg(prueth->mii_rt, slice, MII_RT_TX_IPG_100M);
break;
+ case SPEED_10:
+ /* IPG for 10M is same as 100M */
+ icssg_mii_update_ipg(prueth->mii_rt, slice, MII_RT_TX_IPG_100M);
+ break;
default:
/* Other links speeds not supported */
netdev_err(emac->ndev, "Unsupported link speed\n");
@@ -440,6 +444,9 @@ void icssg_config_set_speed(struct prueth_emac *emac)
case SPEED_100:
fw_speed = FW_LINK_SPEED_100M;
break;
+ case SPEED_10:
+ fw_speed = FW_LINK_SPEED_10M;
+ break;
default:
/* Other links speeds not supported */
netdev_err(emac->ndev, "Unsupported link speed\n");
diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.c b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
index 1bcb4e174652..410612f43cbd 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_prueth.c
+++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
@@ -1149,7 +1149,6 @@ static int emac_phy_connect(struct prueth_emac *emac)
/* remove unsupported modes */
phy_remove_link_mode(ndev->phydev, ETHTOOL_LINK_MODE_10baseT_Half_BIT);
- phy_remove_link_mode(ndev->phydev, ETHTOOL_LINK_MODE_10baseT_Full_BIT);
phy_remove_link_mode(ndev->phydev, ETHTOOL_LINK_MODE_100baseT_Half_BIT);
phy_remove_link_mode(ndev->phydev, ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
phy_remove_link_mode(ndev->phydev, ETHTOOL_LINK_MODE_Pause_BIT);
@@ -2090,13 +2089,29 @@ static int prueth_probe(struct platform_device *pdev)
goto free_pool;
}
+ prueth->iep1 = icss_iep_get_idx(np, 1);
+ if (IS_ERR(prueth->iep1)) {
+ ret = dev_err_probe(dev, PTR_ERR(prueth->iep1), "iep1 get failed\n");
+ icss_iep_put(prueth->iep0);
+ prueth->iep0 = NULL;
+ prueth->iep1 = NULL;
+ goto free_pool;
+ }
+
+ if (prueth->pdata.quirk_10m_link_issue) {
+ /* Enable IEP1 for FW in 64bit mode as W/A for 10M FD link detect issue under TX
+ * traffic.
+ */
+ icss_iep_init_fw(prueth->iep1);
+ }
+
/* setup netdev interfaces */
if (eth0_node) {
ret = prueth_netdev_init(prueth, eth0_node);
if (ret) {
dev_err_probe(dev, ret, "netdev init %s failed\n",
eth0_node->name);
- goto netdev_exit;
+ goto exit_iep;
}
prueth->emac[PRUETH_MAC0]->iep = prueth->iep0;
}
@@ -2167,6 +2182,10 @@ static int prueth_probe(struct platform_device *pdev)
prueth_netdev_exit(prueth, eth_node);
}
+exit_iep:
+ if (prueth->pdata.quirk_10m_link_issue)
+ icss_iep_exit_fw(prueth->iep1);
+
free_pool:
gen_pool_free(prueth->sram_pool,
(unsigned long)prueth->msmcram.va, msmc_ram_size);
@@ -2212,6 +2231,10 @@ static void prueth_remove(struct platform_device *pdev)
prueth_netdev_exit(prueth, eth_node);
}
+ if (prueth->pdata.quirk_10m_link_issue)
+ icss_iep_exit_fw(prueth->iep1);
+
+ icss_iep_put(prueth->iep1);
icss_iep_put(prueth->iep0);
gen_pool_free(prueth->sram_pool,
diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.h b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
index a56ab4cdc83c..3fe80a8758d3 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_prueth.h
+++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
@@ -208,6 +208,7 @@ struct prueth_pdata {
* @icssg_hwcmdseq: seq counter or HWQ messages
* @emacs_initialized: num of EMACs/ext ports that are up/running
* @iep0: pointer to IEP0 device
+ * @iep1: pointer to IEP1 device
*/
struct prueth {
struct device *dev;
@@ -231,6 +232,7 @@ struct prueth {
u8 icssg_hwcmdseq;
int emacs_initialized;
struct icss_iep *iep0;
+ struct icss_iep *iep1;
};
struct emac_tx_ts_response {
--
2.34.1
Powered by blists - more mailing lists