[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230824144952.5b908649@slackpad.lan>
Date: Thu, 24 Aug 2023 14:50:25 +0100
From: Andre Przywara <andre.przywara@....com>
To: Andrey Skvortsov <andrej.skvortzov@...il.com>
Cc: Jernej Škrabec <jernej.skrabec@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Chen-Yu Tsai <wens@...e.org>,
Samuel Holland <samuel@...lland.org>,
Kees Cook <keescook@...omium.org>,
Tony Luck <tony.luck@...el.com>,
"Guilherme G. Piccoli" <gpiccoli@...lia.com>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-sunxi@...ts.linux.dev, linux-kernel@...r.kernel.org,
linux-hardening@...r.kernel.org,
Jarrah Gosbell <kernel@...ef.tools>,
Arnaud Ferraris <arnaud.ferraris@...labora.com>,
Pavel Machek <pavel@....cz>
Subject: Re: [PATCH v2] arm64: dts: pinephone: Add pstore support for
PinePhone A64
On Wed, 23 Aug 2023 21:36:51 +0200
Jernej Škrabec <jernej.skrabec@...il.com> wrote:
Hi Andrey,
> send new revision as standalone e-mail, not as reply to old discussion.
>
> Dne torek, 22. avgust 2023 ob 11:23:58 CEST je Andrey Skvortsov napisal(a):
> > This patch reserves some memory in the DTS and sets up a
> > pstore device tree node to enable pstore support.
> >
> > In general any DRAM address, that isn't overwritten during a boot is
> > suitable for pstore.
> >
> > Range from 0x40000000 - 0x50000000 is heavily used by u-boot for
> > internal use and to load kernel, fdt, fdto, scripts, pxefile and ramdisk
> > later in the boot process. Ramdisk start address is 0x4FF00000,
> > initramfs for kernel with some hacking features and debug info enabled
> > can take more than 100Mb and final address will be around 0x58000000.
> > Address 0x61000000 will most likely not overlap with that.
>
> There are other bootloaders as U-Boot, especially on PinePhone. Are you sure
> it works there too? What about U-Boot configuration, will those addresses still
> be used if configuration is changed?
Also going along with what Pavel said (that's it more a policy
decision, not a device property), I feel like this node should be added
by the bootloader then. And indeed U-Boot has support for that already.
>From skimming over the code in cmd/pstore.c: if you enable
CONFIG_CMD_PSTORE and set CONFIG_CMD_PSTORE_MEM_ADDR to your chosen
address, then the U-Boot code will insert a reserved memory node on the
fly. Would that solve your problem?
Cheers,
Andre
> Best regards,
> Jernej
>
> >
> > Signed-off-by: Andrey Skvortsov <andrej.skvortzov@...il.com>
> > ---
> >
> > Changes in v2:
> > - Update commit description with information about why this base address is
> > used.
> >
> > .../boot/dts/allwinner/sun50i-a64-pinephone.dtsi | 16 ++++++++++++++++
> > 1 file changed, 16 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
> > b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi index
> > 87847116ab6d..84f9410b0b70 100644
> > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
> > @@ -19,6 +19,22 @@ aliases {
> > serial0 = &uart0;
> > };
> >
> > + reserved-memory {
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges;
> > +
> > + pstore_mem: ramoops@...00000 {
> > + compatible = "ramoops";
> > + reg = <0x61000000 0x100000>;
> > + record-size = <0x20000>;
> > + console-size = <0x20000>;
> > + ftrace-size = <0x20000>;
> > + pmsg-size = <0x20000>;
> > + ecc-size = <16>;
> > + };
> > + };
> > +
> > backlight: backlight {
> > compatible = "pwm-backlight";
> > pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>;
>
>
>
>
>
Powered by blists - more mailing lists