| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ZOg/pqoqhp/3rerZ@buildd.core.avm.de>
Date: Fri, 25 Aug 2023 07:44:06 +0200
From: Nicolas Schier <n.schier@....de>
To: Kees Cook <keescook@...omium.org>
Cc: Masahiro Yamada <masahiroy@...nel.org>, x86@...nel.org,
linux-arm-kernel@...ts.infradead.org,
linuxppc-dev@...ts.ozlabs.org, linux-riscv@...ts.infradead.org,
linux-s390@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-kbuild@...r.kernel.org, linux-hardening@...r.kernel.org
Subject: Re: [PATCH] kbuild: Show Kconfig fragments in "help"
On Thu, Aug 24, 2023 at 03:36:10PM -0700, Kees Cook wrote:
> Doing a "make help" would show only hard-coded Kconfig targets and
> depended on the archhelp target to include ".config" targets. There was
> nothing showing global kernel/configs/ targets. Solve this by walking
> the wildcard list and include them in the output, using the first comment
> line as the help text.
>
> Update all Kconfig fragments to include help text and adjust archhelp
> targets to avoid redundancy.
>
> Adds the following section to "help" target output:
>
> Configuration fragment targets (for enabling various Kconfig items):
> debug.config - Debugging for CI systems and finding regressions
> kvm_guest.config - Bootable as a KVM guest
> nopm.config - Disable Power Management
> rust.config - Enable Rust
> tiny-base.config - Minimal options for tiny systems
> tiny.config - Smallest possible kernel image
> x86_debug.config - Debugging options for tip tree testing
> xen.config - Bootable as a Xen guest
> tiny.config - x86-specific options for a small kernel image
> xen.config - x86-specific options for a Xen virtualization guest
>
> Cc: Masahiro Yamada <masahiroy@...nel.org>
> Cc: x86@...nel.org
> Cc: linux-arm-kernel@...ts.infradead.org
> Cc: linuxppc-dev@...ts.ozlabs.org
> Cc: linux-riscv@...ts.infradead.org
> Cc: linux-s390@...r.kernel.org
> Signed-off-by: Kees Cook <keescook@...omium.org>
> ---
Thanks for that patch! Several times I found myself searching the tree
to find a specific kconfig fragment; I think you found a nice solution.
Two minor things below.
> Makefile | 1 -
> arch/arm/configs/dram_0x00000000.config | 1 +
> arch/arm/configs/dram_0xc0000000.config | 1 +
> arch/arm/configs/dram_0xd0000000.config | 1 +
> arch/arm/configs/lpae.config | 1 +
> arch/arm64/configs/virt.config | 1 +
> arch/powerpc/configs/32-bit.config | 1 +
> arch/powerpc/configs/64-bit.config | 1 +
> arch/powerpc/configs/85xx-32bit.config | 1 +
> arch/powerpc/configs/85xx-64bit.config | 1 +
> arch/powerpc/configs/85xx-hw.config | 1 +
> arch/powerpc/configs/85xx-smp.config | 1 +
> arch/powerpc/configs/86xx-hw.config | 1 +
> arch/powerpc/configs/86xx-smp.config | 1 +
> arch/powerpc/configs/altivec.config | 1 +
> arch/powerpc/configs/be.config | 1 +
> arch/powerpc/configs/book3s_32.config | 1 +
> arch/powerpc/configs/corenet_base.config | 1 +
> arch/powerpc/configs/debug.config | 1 +
> arch/powerpc/configs/disable-werror.config | 1 +
> arch/powerpc/configs/dpaa.config | 1 +
> arch/powerpc/configs/fsl-emb-nonhw.config | 1 +
> arch/powerpc/configs/guest.config | 1 +
> arch/powerpc/configs/le.config | 1 +
> arch/powerpc/configs/mpc85xx_base.config | 1 +
> arch/powerpc/configs/mpc86xx_base.config | 1 +
> arch/powerpc/configs/ppc64le.config | 1 +
> arch/powerpc/configs/security.config | 4 +++-
> arch/riscv/configs/32-bit.config | 1 +
> arch/riscv/configs/64-bit.config | 1 +
> arch/s390/configs/btf.config | 1 +
> arch/s390/configs/kasan.config | 1 +
> arch/x86/Makefile | 4 ----
> arch/x86/configs/tiny.config | 2 ++
> arch/x86/configs/xen.config | 2 ++
> kernel/configs/debug.config | 2 ++
> kernel/configs/kvm_guest.config | 1 +
> kernel/configs/nopm.config | 2 ++
> kernel/configs/rust.config | 1 +
> kernel/configs/tiny-base.config | 1 +
> kernel/configs/tiny.config | 2 ++
> kernel/configs/x86_debug.config | 1 +
> kernel/configs/xen.config | 2 ++
> scripts/kconfig/Makefile | 13 ++++++++++---
> 44 files changed, 59 insertions(+), 9 deletions(-)
>
> diff --git a/Makefile b/Makefile
> index 4739c21a63e2..91c90ce8e0e3 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -1674,7 +1674,6 @@ help:
> @echo ' mrproper - Remove all generated files + config + various backup files'
> @echo ' distclean - mrproper + remove editor backup and patch files'
> @echo ''
> - @echo 'Configuration targets:'
> @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
> @echo ''
> @echo 'Other generic targets:'
> diff --git a/arch/arm/configs/dram_0x00000000.config b/arch/arm/configs/dram_0x00000000.config
> index db96dcb420ce..4de3fde0de9a 100644
> --- a/arch/arm/configs/dram_0x00000000.config
> +++ b/arch/arm/configs/dram_0x00000000.config
> @@ -1 +1,2 @@
> +# DRAM base at 0x00000000
> CONFIG_DRAM_BASE=0x00000000
> diff --git a/arch/arm/configs/dram_0xc0000000.config b/arch/arm/configs/dram_0xc0000000.config
> index 343d5333d973..fdd4c7b1461e 100644
> --- a/arch/arm/configs/dram_0xc0000000.config
> +++ b/arch/arm/configs/dram_0xc0000000.config
> @@ -1 +1,2 @@
> +# DRAM base at 0xc0000000
> CONFIG_DRAM_BASE=0xc0000000
> diff --git a/arch/arm/configs/dram_0xd0000000.config b/arch/arm/configs/dram_0xd0000000.config
> index 61ba7045f8a1..54defdc8d24c 100644
> --- a/arch/arm/configs/dram_0xd0000000.config
> +++ b/arch/arm/configs/dram_0xd0000000.config
> @@ -1 +1,2 @@
> +# DRAM base at 0xd0000000
> CONFIG_DRAM_BASE=0xd0000000
> diff --git a/arch/arm/configs/lpae.config b/arch/arm/configs/lpae.config
> index a6d6f7ab3c01..e8d3cd8f1e4b 100644
> --- a/arch/arm/configs/lpae.config
> +++ b/arch/arm/configs/lpae.config
> @@ -1,2 +1,3 @@
> +# Enable Large Physical Address Extension mode
> CONFIG_ARM_LPAE=y
> CONFIG_VMSPLIT_2G=y
> diff --git a/arch/arm64/configs/virt.config b/arch/arm64/configs/virt.config
> index 6865d54e68f8..83333a9aa1a5 100644
> --- a/arch/arm64/configs/virt.config
> +++ b/arch/arm64/configs/virt.config
> @@ -1,3 +1,4 @@
> +# Virtualization guest
> #
> # Base options for platforms
> #
> diff --git a/arch/powerpc/configs/32-bit.config b/arch/powerpc/configs/32-bit.config
> index ad6546850c68..1a4c93a17007 100644
> --- a/arch/powerpc/configs/32-bit.config
> +++ b/arch/powerpc/configs/32-bit.config
> @@ -1 +1,2 @@
> +# Build a 32-bit image
> # CONFIG_PPC64 is not set
> diff --git a/arch/powerpc/configs/64-bit.config b/arch/powerpc/configs/64-bit.config
> index 0fe6406929e2..cc371309bb0c 100644
> --- a/arch/powerpc/configs/64-bit.config
> +++ b/arch/powerpc/configs/64-bit.config
> @@ -1 +1,2 @@
> +# Build a 64-bit image
> CONFIG_PPC64=y
> diff --git a/arch/powerpc/configs/85xx-32bit.config b/arch/powerpc/configs/85xx-32bit.config
> index 6b8894d727a2..866e77e22762 100644
> --- a/arch/powerpc/configs/85xx-32bit.config
> +++ b/arch/powerpc/configs/85xx-32bit.config
> @@ -1,3 +1,4 @@
> +# Build a 32-bit 85xx image
> CONFIG_HIGHMEM=y
> CONFIG_KEXEC=y
> CONFIG_PPC_85xx=y
> diff --git a/arch/powerpc/configs/85xx-64bit.config b/arch/powerpc/configs/85xx-64bit.config
> index 4aba81222885..cca4151ee889 100644
> --- a/arch/powerpc/configs/85xx-64bit.config
> +++ b/arch/powerpc/configs/85xx-64bit.config
> @@ -1,3 +1,4 @@
> +# Build a 64-bit 85xx image
> CONFIG_MATH_EMULATION=y
> CONFIG_MATH_EMULATION_HW_UNIMPLEMENTED=y
> CONFIG_PPC64=y
> diff --git a/arch/powerpc/configs/85xx-hw.config b/arch/powerpc/configs/85xx-hw.config
> index 524db76f47b7..76b22f8a8172 100644
> --- a/arch/powerpc/configs/85xx-hw.config
> +++ b/arch/powerpc/configs/85xx-hw.config
> @@ -1,3 +1,4 @@
> +# Base hardware support for 86xx
> CONFIG_AQUANTIA_PHY=y
> CONFIG_AT803X_PHY=y
> CONFIG_ATA=y
> diff --git a/arch/powerpc/configs/85xx-smp.config b/arch/powerpc/configs/85xx-smp.config
> index 3b4d1e54636d..d3525e71cb2f 100644
> --- a/arch/powerpc/configs/85xx-smp.config
> +++ b/arch/powerpc/configs/85xx-smp.config
> @@ -1,2 +1,3 @@
> +# Enable SMP on 85xx
> CONFIG_NR_CPUS=24
> CONFIG_SMP=y
> diff --git a/arch/powerpc/configs/86xx-hw.config b/arch/powerpc/configs/86xx-hw.config
> index 0cb24b33c88e..7b8d9f9c3c01 100644
> --- a/arch/powerpc/configs/86xx-hw.config
> +++ b/arch/powerpc/configs/86xx-hw.config
> @@ -1,3 +1,4 @@
> +# Base hardware support for 86xx
> CONFIG_ATA=y
> CONFIG_BLK_DEV_SD=y
> CONFIG_BLK_DEV_SR=y
> diff --git a/arch/powerpc/configs/86xx-smp.config b/arch/powerpc/configs/86xx-smp.config
> index 40ac38d3038c..e6cd06a35624 100644
> --- a/arch/powerpc/configs/86xx-smp.config
> +++ b/arch/powerpc/configs/86xx-smp.config
> @@ -1,2 +1,3 @@
> +# Enable SMP on 86xx
> CONFIG_NR_CPUS=2
> CONFIG_SMP=y
> diff --git a/arch/powerpc/configs/altivec.config b/arch/powerpc/configs/altivec.config
> index 58a697cb5a62..1c8eb9b23a7f 100644
> --- a/arch/powerpc/configs/altivec.config
> +++ b/arch/powerpc/configs/altivec.config
> @@ -1 +1,2 @@
> +# Enable Altivec support
> CONFIG_ALTIVEC=y
> diff --git a/arch/powerpc/configs/be.config b/arch/powerpc/configs/be.config
> index c5cdc99a6530..568bba8ea109 100644
> --- a/arch/powerpc/configs/be.config
> +++ b/arch/powerpc/configs/be.config
> @@ -1 +1,2 @@
> +# Enable Big Endian mode
> CONFIG_CPU_BIG_ENDIAN=y
> diff --git a/arch/powerpc/configs/book3s_32.config b/arch/powerpc/configs/book3s_32.config
> index 8721eb7b1294..f33483f077db 100644
> --- a/arch/powerpc/configs/book3s_32.config
> +++ b/arch/powerpc/configs/book3s_32.config
> @@ -1,2 +1,3 @@
> +# Base support for Book3s
> CONFIG_PPC64=n
> CONFIG_PPC_BOOK3S_32=y
> diff --git a/arch/powerpc/configs/corenet_base.config b/arch/powerpc/configs/corenet_base.config
> index 1c40de1e764b..47bb6e25c90b 100644
> --- a/arch/powerpc/configs/corenet_base.config
> +++ b/arch/powerpc/configs/corenet_base.config
> @@ -1,2 +1,3 @@
> +# Base support for corenet
> CONFIG_CORENET_GENERIC=y
> CONFIG_PPC_QEMU_E500=y
> diff --git a/arch/powerpc/configs/debug.config b/arch/powerpc/configs/debug.config
> index a14ae1f20d60..223b8a2ee8ec 100644
> --- a/arch/powerpc/configs/debug.config
> +++ b/arch/powerpc/configs/debug.config
> @@ -1 +1,2 @@
> +# Enable PowerPC specific debug options
> CONFIG_SCOM_DEBUGFS=y
> diff --git a/arch/powerpc/configs/disable-werror.config b/arch/powerpc/configs/disable-werror.config
> index 6ea12a12432c..76a7847f39ce 100644
> --- a/arch/powerpc/configs/disable-werror.config
> +++ b/arch/powerpc/configs/disable-werror.config
> @@ -1 +1,2 @@
> +# Disable -Werror
> CONFIG_PPC_DISABLE_WERROR=y
> diff --git a/arch/powerpc/configs/dpaa.config b/arch/powerpc/configs/dpaa.config
> index 4ffacafe4036..65a13ba32813 100644
> --- a/arch/powerpc/configs/dpaa.config
> +++ b/arch/powerpc/configs/dpaa.config
> @@ -1,3 +1,4 @@
> +# Base suppot for DPPA
> CONFIG_FSL_DPAA=y
> CONFIG_FSL_PAMU=y
> CONFIG_FSL_FMAN=y
> diff --git a/arch/powerpc/configs/fsl-emb-nonhw.config b/arch/powerpc/configs/fsl-emb-nonhw.config
> index 3009b0efaf34..d1249996cf45 100644
> --- a/arch/powerpc/configs/fsl-emb-nonhw.config
> +++ b/arch/powerpc/configs/fsl-emb-nonhw.config
> @@ -1,3 +1,4 @@
> +# Non-hardware options common to 85xx and corenet
> CONFIG_ADFS_FS=m
> CONFIG_AFFS_FS=m
> CONFIG_AUDIT=y
> diff --git a/arch/powerpc/configs/guest.config b/arch/powerpc/configs/guest.config
> index fece83487215..f04ababbb35a 100644
> --- a/arch/powerpc/configs/guest.config
> +++ b/arch/powerpc/configs/guest.config
> @@ -1,3 +1,4 @@
> +# PowerPC specific virtualization guest options
> CONFIG_VIRTIO_BLK=y
> CONFIG_SCSI_VIRTIO=y
> CONFIG_VIRTIO_NET=y
> diff --git a/arch/powerpc/configs/le.config b/arch/powerpc/configs/le.config
> index ee43fdb3b8f4..bcf657e1d21f 100644
> --- a/arch/powerpc/configs/le.config
> +++ b/arch/powerpc/configs/le.config
> @@ -1 +1,2 @@
> +# Enable Little Endian mode
> CONFIG_CPU_LITTLE_ENDIAN=y
> diff --git a/arch/powerpc/configs/mpc85xx_base.config b/arch/powerpc/configs/mpc85xx_base.config
> index a1e4d72ed39d..20ecf6575c5c 100644
> --- a/arch/powerpc/configs/mpc85xx_base.config
> +++ b/arch/powerpc/configs/mpc85xx_base.config
> @@ -1,3 +1,4 @@
> +# Base mpc85xxx support
> CONFIG_MATH_EMULATION=y
> CONFIG_MPC8536_DS=y
> CONFIG_MPC85xx_DS=y
> diff --git a/arch/powerpc/configs/mpc86xx_base.config b/arch/powerpc/configs/mpc86xx_base.config
> index 632c014b122d..8239d1e7785d 100644
> --- a/arch/powerpc/configs/mpc86xx_base.config
> +++ b/arch/powerpc/configs/mpc86xx_base.config
> @@ -1,3 +1,4 @@
> +# Base mpc85xxx support
> CONFIG_PPC_86xx=y
> CONFIG_GEF_PPC9A=y
> CONFIG_GEF_SBC310=y
> diff --git a/arch/powerpc/configs/ppc64le.config b/arch/powerpc/configs/ppc64le.config
> index 14dca1062c1b..ac3614cd7926 100644
> --- a/arch/powerpc/configs/ppc64le.config
> +++ b/arch/powerpc/configs/ppc64le.config
> @@ -1,2 +1,3 @@
> +# Enable ppc64le mode
> CONFIG_PPC64=y
> CONFIG_CPU_LITTLE_ENDIAN=y
> diff --git a/arch/powerpc/configs/security.config b/arch/powerpc/configs/security.config
> index 1c91a35c6a73..f47034955d12 100644
> --- a/arch/powerpc/configs/security.config
> +++ b/arch/powerpc/configs/security.config
> @@ -1,3 +1,5 @@
> +# Common security options for PowerPC builds
> +
> # This is the equivalent of booting with lockdown=integrity
> CONFIG_SECURITY=y
> CONFIG_SECURITYFS=y
> @@ -12,4 +14,4 @@ CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
>
> # UBSAN bounds checking is very cheap and good for hardening
> CONFIG_UBSAN=y
> -# CONFIG_UBSAN_MISC is not set
> \ No newline at end of file
> +# CONFIG_UBSAN_MISC is not set
> diff --git a/arch/riscv/configs/32-bit.config b/arch/riscv/configs/32-bit.config
> index f6af0f708df4..60dfa2809b19 100644
> --- a/arch/riscv/configs/32-bit.config
> +++ b/arch/riscv/configs/32-bit.config
> @@ -1,3 +1,4 @@
> +# Build a 32-bit image
> CONFIG_ARCH_RV32I=y
> CONFIG_32BIT=y
> # CONFIG_PORTABLE is not set
> diff --git a/arch/riscv/configs/64-bit.config b/arch/riscv/configs/64-bit.config
> index 313edc554d84..31a1ad138944 100644
> --- a/arch/riscv/configs/64-bit.config
> +++ b/arch/riscv/configs/64-bit.config
> @@ -1,2 +1,3 @@
> +# Build a 64-bit image
> CONFIG_ARCH_RV64I=y
> CONFIG_64BIT=y
> diff --git a/arch/s390/configs/btf.config b/arch/s390/configs/btf.config
> index 39227b4511af..c69b1a370990 100644
> --- a/arch/s390/configs/btf.config
> +++ b/arch/s390/configs/btf.config
> @@ -1 +1,2 @@
> +# Enable BTF debug info
> CONFIG_DEBUG_INFO_BTF=y
> diff --git a/arch/s390/configs/kasan.config b/arch/s390/configs/kasan.config
> index 700a8b25c3ff..da2e1f28c13c 100644
> --- a/arch/s390/configs/kasan.config
> +++ b/arch/s390/configs/kasan.config
> @@ -1,3 +1,4 @@
> +# Enable KASan for debugging
> CONFIG_KASAN=y
> CONFIG_KASAN_INLINE=y
> CONFIG_KASAN_VMALLOC=y
> diff --git a/arch/x86/Makefile b/arch/x86/Makefile
> index fdc2e3abd615..c4b2a8a19fc8 100644
> --- a/arch/x86/Makefile
> +++ b/arch/x86/Makefile
> @@ -335,9 +335,5 @@ define archhelp
> echo ' bzdisk/fdimage*/hdimage/isoimage also accept:'
> echo ' FDARGS="..." arguments for the booted kernel'
> echo ' FDINITRD=file initrd for the booted kernel'
> - echo ''
> - echo ' kvm_guest.config - Enable Kconfig items for running this kernel as a KVM guest'
> - echo ' xen.config - Enable Kconfig items for running this kernel as a Xen guest'
> - echo ' x86_debug.config - Enable tip tree debugging options for testing'
>
> endef
> diff --git a/arch/x86/configs/tiny.config b/arch/x86/configs/tiny.config
> index 66c9e2aab16c..4b75a11369e3 100644
> --- a/arch/x86/configs/tiny.config
> +++ b/arch/x86/configs/tiny.config
> @@ -1,3 +1,5 @@
> +# x86-specific options for a small kernel image
> +#
> CONFIG_NOHIGHMEM=y
> # CONFIG_HIGHMEM4G is not set
> # CONFIG_HIGHMEM64G is not set
> diff --git a/arch/x86/configs/xen.config b/arch/x86/configs/xen.config
> index 581296255b39..46653ec602e0 100644
> --- a/arch/x86/configs/xen.config
> +++ b/arch/x86/configs/xen.config
> @@ -1,3 +1,5 @@
> +# x86-specific options for a Xen virtualization guest
> +#
> # global x86 required specific stuff
> # On 32-bit HIGHMEM4G is not allowed
> CONFIG_HIGHMEM64G=y
> diff --git a/kernel/configs/debug.config b/kernel/configs/debug.config
> index e8db8d938661..874afe2cd7c0 100644
> --- a/kernel/configs/debug.config
> +++ b/kernel/configs/debug.config
> @@ -1,3 +1,5 @@
> +# Debugging for CI systems and finding regressions
> +#
> # The config is based on running daily CI for enterprise Linux distros to
> # seek regressions on linux-next builds on different bare-metal and virtual
> # platforms. It can be used for example,
> diff --git a/kernel/configs/kvm_guest.config b/kernel/configs/kvm_guest.config
> index 208481d91090..3cc2810147da 100644
> --- a/kernel/configs/kvm_guest.config
> +++ b/kernel/configs/kvm_guest.config
> @@ -1,3 +1,4 @@
> +# Bootable as a KVM guest
> CONFIG_NET=y
> CONFIG_NET_CORE=y
> CONFIG_NETDEVICES=y
> diff --git a/kernel/configs/nopm.config b/kernel/configs/nopm.config
> index 81ff07863576..a377c5914218 100644
> --- a/kernel/configs/nopm.config
> +++ b/kernel/configs/nopm.config
> @@ -1,3 +1,5 @@
> +# Disable Power Management
> +
> CONFIG_PM=n
> CONFIG_SUSPEND=n
> CONFIG_HIBERNATION=n
> diff --git a/kernel/configs/rust.config b/kernel/configs/rust.config
> index 38a7c5362c9c..941c69c161ad 100644
> --- a/kernel/configs/rust.config
> +++ b/kernel/configs/rust.config
> @@ -1 +1,2 @@
> +# Enable Rust
> CONFIG_RUST=y
> diff --git a/kernel/configs/tiny-base.config b/kernel/configs/tiny-base.config
> index 2f0e6bf6db2c..ac4d254abc3f 100644
> --- a/kernel/configs/tiny-base.config
> +++ b/kernel/configs/tiny-base.config
> @@ -1 +1,2 @@
> +# Minimal options for tiny systems
> CONFIG_EMBEDDED=y
(just a note: Randy prepared a patch for removing CONFIG_EMBEDDED:
https://lore.kernel.org/linux-kbuild/20230816055010.31534-1-rdunlap@infradead.org/)
> diff --git a/kernel/configs/tiny.config b/kernel/configs/tiny.config
> index 00009f7d0835..ea643e8f7f14 100644
> --- a/kernel/configs/tiny.config
> +++ b/kernel/configs/tiny.config
> @@ -1,3 +1,5 @@
> +# Smallest possible kernel image
For this fragment alone (not within 'tinyconfig'), "Size-optimize kernel
image" possibly fits better?
> +#
> # CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
> CONFIG_CC_OPTIMIZE_FOR_SIZE=y
> # CONFIG_KERNEL_GZIP is not set
> diff --git a/kernel/configs/x86_debug.config b/kernel/configs/x86_debug.config
> index 6fac5b405334..8a1129a1d59a 100644
> --- a/kernel/configs/x86_debug.config
> +++ b/kernel/configs/x86_debug.config
> @@ -1,3 +1,4 @@
> +# Debugging options for tip tree testing
> CONFIG_X86_DEBUG_FPU=y
> CONFIG_LOCK_STAT=y
> CONFIG_DEBUG_VM=y
> diff --git a/kernel/configs/xen.config b/kernel/configs/xen.config
> index 436f806aa1ed..d14880177fd2 100644
> --- a/kernel/configs/xen.config
> +++ b/kernel/configs/xen.config
> @@ -1,3 +1,5 @@
> +# Bootable as a Xen guest
> +#
> # global stuff - these enable us to allow some
> # of the not so generic stuff below for xen
> CONFIG_PARAVIRT=y
> diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile
> index af1c96198f49..c523f24b504a 100644
> --- a/scripts/kconfig/Makefile
> +++ b/scripts/kconfig/Makefile
> @@ -93,11 +93,11 @@ endif
> %_defconfig: $(obj)/conf
> $(Q)$< $(silent) --defconfig=arch/$(SRCARCH)/configs/$@ $(Kconfig)
>
> -configfiles=$(wildcard $(srctree)/kernel/configs/$@ $(srctree)/arch/$(SRCARCH)/configs/$@)
> +configfiles=$(wildcard $(srctree)/kernel/configs/$(1) $(srctree)/arch/$(SRCARCH)/configs/$(1))
>
> %.config: $(obj)/conf
> - $(if $(call configfiles),, $(error No configuration exists for this target on this architecture))
> - $(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh -m .config $(configfiles)
> + $(if $(call configfiles,$@),, $(error No configuration exists for this target on this architecture))
> + $(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh -m .config $(call configfiles,$@)
> $(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig
>
> PHONY += tinyconfig
> @@ -115,6 +115,7 @@ clean-files += tests/.cache
>
> # Help text used by make help
> help:
> + @echo 'Configuration targets:'
> @echo ' config - Update current config utilising a line-oriented program'
> @echo ' nconfig - Update current config utilising a ncurses menu based program'
> @echo ' menuconfig - Update current config utilising a menu based program'
> @@ -141,6 +142,12 @@ help:
> @echo ' default value without prompting'
> @echo ' tinyconfig - Configure the tiniest possible kernel'
> @echo ' testconfig - Run Kconfig unit tests (requires python3 and pytest)'
> + @echo ''
> + @echo 'Configuration fragment targets (for enabling various Kconfig items):'
> + @$(foreach c, $(call configfiles,*.config), \
> + printf " %-20s - %s\\n" \
> + $(shell basename $(c)) \
> + "$(subst # ,,$(shell grep -m1 '^# ' $(c)))";)
Better use '$(notdir $(c))` instead of forking a shell with
'$(shell basename $(c))'.
Kind regards,
Nicolas
Powered by blists - more mailing lists