| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <dwe4oyunc2uitullflhryg7kmgeklj5wlx6ztrg5hahl64tkuz@koe4tijgj3bp>
Date: Sun, 27 Aug 2023 00:04:04 +0300
From: Serge Semin <fancer.lancer@...il.com>
To: Keguang Zhang <keguang.zhang@...il.com>
Cc: netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-mips@...r.kernel.org, linux-kernel@...r.kernel.org,
Lee Jones <lee@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
"David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Jose Abreu <joabreu@...opsys.com>,
Serge Semin <Sergey.Semin@...kalelectronics.ru>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: Re: [PATCH v3 2/4] dt-bindings: net: Add Loongson-1 Ethernet
Controller
On Thu, Aug 24, 2023 at 08:50:10PM +0800, Keguang Zhang wrote:
> Add devicetree binding document for Loongson-1 Ethernet controller.
>
> Signed-off-by: Keguang Zhang <keguang.zhang@...il.com>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
> ---
> V2 -> V3: Split the DT-schema file into loongson,ls1b-gmac.yaml
> and loongson,ls1c-emac.yaml (suggested by Serge Semin)
> Change the compatibles to loongson,ls1b-gmac and loongson,ls1c-emac
> Rename loongson,dwmac-syscon to loongson,ls1-syscon
> Amend the title
> Add description
> Add Reviewed-by tag from Krzysztof Kozlowski(Sorry! I'm not sure)
> V1 -> V2: Fix "clock-names" and "interrupt-names" property
> Rename the syscon property to "loongson,dwmac-syscon"
> Drop "phy-handle" and "phy-mode" requirement
> Revert adding loongson,ls1b-dwmac/loongson,ls1c-dwmac
> to snps,dwmac.yaml
>
> .../bindings/net/loongson,ls1b-gmac.yaml | 115 ++++++++++++++++++
> .../bindings/net/loongson,ls1c-emac.yaml | 114 +++++++++++++++++
> 2 files changed, 229 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/loongson,ls1b-gmac.yaml
> create mode 100644 Documentation/devicetree/bindings/net/loongson,ls1c-emac.yaml
>
> diff --git a/Documentation/devicetree/bindings/net/loongson,ls1b-gmac.yaml b/Documentation/devicetree/bindings/net/loongson,ls1b-gmac.yaml
> new file mode 100644
> index 000000000000..f661d5b86649
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/loongson,ls1b-gmac.yaml
> @@ -0,0 +1,115 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/loongson,ls1b-gmac.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Loongson-1B Gigabit Ethernet MAC Controller
> +
> +maintainers:
> + - Keguang Zhang <keguang.zhang@...il.com>
> +
> +description:
Use "|" to keep the text formatting.
description: |
> + Loongson-1B Gigabit Ethernet MAC Controller is based on
> + Synopsys DesignWare MAC (version 3.50a).
> +
> + Main features
> + - Dual 10/100/1000Mbps GMAC controllers
> + - Full-duplex operation (IEEE 802.3x flow control automatic transmission)
> + - Half-duplex operation (CSMA/CD Protocol and back-pressure support)
> + - RX Checksum Offload
> + - TX Checksum insertion
> + - MII interface
> + - RGMII interface
If only all the DW *MAC-based devices have such info in the
bindings the life would have been much easier...
> +
> +select:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - loongson,ls1b-gmac
> + required:
> + - compatible
> +
> +properties:
> + compatible:
> + items:
> + - enum:
> + - loongson,ls1b-gmac
> + - const: snps,dwmac-3.50a
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + clock-names:
> + items:
> + - const: stmmaceth
since there is a single clock then just:
clock-names:
const: stmmaceth
> +
> + interrupts:
> + maxItems: 1
> +
> + interrupt-names:
> + items:
> + - const: macirq
ditto. just
interrupt-names:
const: macirq
> +
> + loongson,ls1-syscon:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description:
> + Phandle to the syscon containing some extra configurations
> + including PHY interface mode.
> +
> + phy-mode:
> + items:
> + - enum:
> + - mii
> + - rgmii-id
it's a single string then just:
phy-mode:
enum: ...
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - interrupts
> + - interrupt-names
> + - loongson,ls1-syscon
> +
> +allOf:
> + - $ref: snps,dwmac.yaml#
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/loongson,ls1x-clk.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> +
> + gmac0: ethernet@...10000 {
> + compatible = "loongson,ls1b-gmac", "snps,dwmac-3.50a";
> + reg = <0x1fe10000 0x10000>;
> +
> + clocks = <&clkc LS1X_CLKID_AHB>;
> + clock-names = "stmmaceth";
> +
> + interrupt-parent = <&intc1>;
> + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "macirq";
> +
> + loongson,ls1-syscon = <&syscon>;
> +
> + phy-handle = <&phy0>;
> + phy-mode = "mii";
> + snps,pbl = <1>;
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,dwmac-mdio";
> +
> + phy0: ethernet-phy@0 {
> + reg = <0x0>;
> + };
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/net/loongson,ls1c-emac.yaml b/Documentation/devicetree/bindings/net/loongson,ls1c-emac.yaml
> new file mode 100644
> index 000000000000..1ffad41941bf
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/loongson,ls1c-emac.yaml
> @@ -0,0 +1,114 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/loongson,ls1c-emac.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Loongson-1C Ethernet MAC Controller
> +
> +maintainers:
> + - Keguang Zhang <keguang.zhang@...il.com>
> +
> +description:
the same comment about the "|" modifier.
> + Loongson-1C Ethernet MAC Controller is based on
> + Synopsys DesignWare MAC (version 3.50a).
> +
> + Main features
> + - 10/100Mbps
> + - Full-duplex operation (IEEE 802.3x flow control automatic transmission)
> + - Half-duplex operation (CSMA/CD Protocol and back-pressure support)
> + - IEEE 802.1Q VLAN tag detection for reception frames
> + - MII interface
> + - RMII interface
Based on the plat_stmmacenet_data data defined for the LS1C MAC it
also support support Tx COE. Isn't it? What about Rx COE?
> +
> +select:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - loongson,ls1c-emac
> + required:
> + - compatible
> +
> +properties:
> + compatible:
> + items:
> + - enum:
> + - loongson,ls1c-emac
> + - const: snps,dwmac-3.50a
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + clock-names:
> + items:
> + - const: stmmaceth
clock-names:
const: stmmaceth
?
> +
> + interrupts:
> + maxItems: 1
> +
> + interrupt-names:
> + items:
> + - const: macirq
interrupt-names:
const: macirq
?
> +
> + loongson,ls1-syscon:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description:
> + Phandle to the syscon containing some extra configurations
> + including PHY interface mode.
> +
> + phy-mode:
> + items:
> + - enum:
> + - mii
> + - rmii
phy-mode:
enum: ...
?
-Serge(y)
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - interrupts
> + - interrupt-names
> + - loongson,ls1-syscon
> +
> +allOf:
> + - $ref: snps,dwmac.yaml#
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/loongson,ls1x-clk.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> +
> + emac: ethernet@...10000 {
> + compatible = "loongson,ls1c-emac", "snps,dwmac-3.50a";
> + reg = <0x1fe10000 0x10000>;
> +
> + clocks = <&clkc LS1X_CLKID_AHB>;
> + clock-names = "stmmaceth";
> +
> + interrupt-parent = <&intc1>;
> + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "macirq";
> +
> + loongson,ls1-syscon = <&syscon>;
> +
> + phy-handle = <&phy0>;
> + phy-mode = "mii";
> + snps,pbl = <1>;
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,dwmac-mdio";
> +
> + phy0: ethernet-phy@13 {
> + reg = <0x13>;
> + };
> + };
> + };
> --
> 2.39.2
>
>
Powered by blists - more mailing lists