lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <bd4a41b6-339e-67aa-a725-9d833efa6c79@csgroup.eu>
Date:   Sat, 26 Aug 2023 06:32:32 +0000
From:   Christophe Leroy <christophe.leroy@...roup.eu>
To:     Alexandra Diupina <adiupina@...ralinux.ru>,
        Zhao Qiang <qiang.zhao@....com>
CC:     "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        "linuxppc-dev@...ts.ozlabs.org" <linuxppc-dev@...ts.ozlabs.org>,
        "David S. Miller" <davem@...emloft.net>,
        "lvc-project@...uxtesting.org" <lvc-project@...uxtesting.org>
Subject: Re: [PATCH] fsl_ucc_hdlc: add a check of the return value from
 hdlc_open



Le 25/08/2023 à 16:31, Alexandra Diupina a écrit :
> [Vous ne recevez pas souvent de courriers de adiupina@...ralinux.ru. Découvrez pourquoi ceci est important à https://aka.ms/LearnAboutSenderIdentification ]
> 
> Process the result of hold_open() and return it from
> uhdlc_open() in case of an error
> It is necessary to pass the error code up the control flow,
> similar to a possible error in request_irq()
> 
> Found by Linux Verification Center (linuxtesting.org) with SVACE.
> 
> Fixes: c19b6d246a35 ("drivers/net: support hdlc function for QE-UCC")
> Signed-off-by: Alexandra Diupina <adiupina@...ralinux.ru>
> ---
>   drivers/net/wan/fsl_ucc_hdlc.c | 7 +++++--
>   1 file changed, 5 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/wan/fsl_ucc_hdlc.c b/drivers/net/wan/fsl_ucc_hdlc.c
> index 47c2ad7a3e42..cdd9489c712e 100644
> --- a/drivers/net/wan/fsl_ucc_hdlc.c
> +++ b/drivers/net/wan/fsl_ucc_hdlc.c
> @@ -708,6 +708,7 @@ static int uhdlc_open(struct net_device *dev)
>          hdlc_device *hdlc = dev_to_hdlc(dev);
>          struct ucc_hdlc_private *priv = hdlc->priv;
>          struct ucc_tdm *utdm = priv->utdm;
> +       int rc = 0;

rc not usefull outside the block below, no point in having it at all.

> 
>          if (priv->hdlc_busy != 1) {
>                  if (request_irq(priv->ut_info->uf_info.irq,
> @@ -731,10 +732,12 @@ static int uhdlc_open(struct net_device *dev)
>                  napi_enable(&priv->napi);
>                  netdev_reset_queue(dev);
>                  netif_start_queue(dev);
> -               hdlc_open(dev);
> +               rc = hdlc_open(dev);
> +               if (rc)
> +                       return rc;

Don't need that rc variable. Just do:

	return hdlc_open(dev);

>          }
> 
> -       return 0;
> +       return rc;

Change not needed, leave return 0 here.

>   }
> 
>   static void uhdlc_memclean(struct ucc_hdlc_private *priv)
> --
> 2.30.2
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ