| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <cf81c490-098b-4d2b-1129-8297ccf14090@rock-chips.com>
Date: Mon, 28 Aug 2023 15:48:39 +0800
From: Shawn Lin <shawn.lin@...k-chips.com>
To: Sergey Khimich <serghox@...il.com>
Cc: shawn.lin@...k-chips.com, linux-mmc@...r.kernel.org,
Adrian Hunter <adrian.hunter@...el.com>,
Ulf Hansson <ulf.hansson@...aro.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
linux-kernel@...r.kernel.org, Jyan Chou <jyanchou@...ltek.com>
Subject: Re: [PATCH v1 1/1] mmc: sdhci-of-dwcmshc: Add CQE support
+Jyan Chou
On 2023/8/25 22:35, Sergey Khimich wrote:
> Implement SDHCI CQE support for DesignWare SDHCI.
> For enabling CQE support just set 'supports-cqe' in your DevTree file
> for appropriate mmc node.
>
Hi Sergey
Jyan had pushed a version to support it:
https://patchwork.kernel.org/project/linux-mmc/patch/20230616063731.17591-1-jyanchou@realtek.com/
And obviously there are some special limitations from IP vendor
you need to address such as 128MB DMA boundary.
> Signed-off-by: Sergey Khimich <serghox@...il.com>
> ---
> drivers/mmc/host/Kconfig | 1 +
> drivers/mmc/host/sdhci-of-dwcmshc.c | 154 +++++++++++++++++++++++++++-
> 2 files changed, 154 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 159a3e9490ae..c9fc790d7dba 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -233,6 +233,7 @@ config MMC_SDHCI_OF_DWCMSHC
> depends on MMC_SDHCI_PLTFM
> depends on OF
> depends on COMMON_CLK
> + select MMC_CQHCI
> help
> This selects Synopsys DesignWare Cores Mobile Storage Controller
> support.
> diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c
> index e68cd87998c8..5ee8954a8f5a 100644
> --- a/drivers/mmc/host/sdhci-of-dwcmshc.c
> +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
> @@ -19,6 +19,7 @@
> #include <linux/sizes.h>
>
> #include "sdhci-pltfm.h"
> +#include "cqhci.h"
>
> #define SDHCI_DWCMSHC_ARG2_STUFF GENMASK(31, 16)
>
> @@ -35,6 +36,9 @@
> #define DWCMSHC_ENHANCED_STROBE BIT(8)
> #define DWCMSHC_EMMC_ATCTRL 0x40
>
> +/* DWC IP vendor area 2 pointer */
> +#define DWCMSHC_P_VENDOR_AREA2 0xea
> +
> /* Rockchip specific Registers */
> #define DWCMSHC_EMMC_DLL_CTRL 0x800
> #define DWCMSHC_EMMC_DLL_RXCLK 0x804
> @@ -74,6 +78,10 @@
> #define BOUNDARY_OK(addr, len) \
> ((addr | (SZ_128M - 1)) == ((addr + len - 1) | (SZ_128M - 1)))
>
> +#define DWCMCHC_SDHCI_CQE_TRNS_MODE (SDHCI_TRNS_MULTI | \
> + SDHCI_TRNS_BLK_CNT_EN | \
> + SDHCI_TRNS_DMA)
> +
> enum dwcmshc_rk_type {
> DWCMSHC_RK3568,
> DWCMSHC_RK3588,
> @@ -89,7 +97,8 @@ struct rk35xx_priv {
>
> struct dwcmshc_priv {
> struct clk *bus_clk;
> - int vendor_specific_area1; /* P_VENDOR_SPECIFIC_AREA reg */
> + int vendor_specific_area1; /* P_VENDOR_SPECIFIC_AREA1 reg */
> + int vendor_specific_area2; /* P_VENDOR_SPECIFIC_AREA2 reg */
> void *priv; /* pointer to SoC private stuff */
> };
>
> @@ -209,6 +218,65 @@ static void dwcmshc_hs400_enhanced_strobe(struct mmc_host *mmc,
> sdhci_writel(host, vendor, reg);
> }
>
> +static u32 dwcmshc_cqe_irq_handler(struct sdhci_host *host, u32 intmask)
> +{
> + int cmd_error = 0;
> + int data_error = 0;
> +
> + if (!sdhci_cqe_irq(host, intmask, &cmd_error, &data_error))
> + return intmask;
> +
> + cqhci_irq(host->mmc, intmask, cmd_error, data_error);
> +
> + return 0;
> +}
> +
> +static void dwcmshc_sdhci_cqe_enable(struct mmc_host *mmc)
> +{
> + struct sdhci_host *host = mmc_priv(mmc);
> + u32 pstate;
> + u8 ctrl;
> + int count = 10;
> +
> + /*
> + * CQE gets stuck if it sees Buffer Read Enable bit set, which can be
> + * the case after tuning, so ensure the buffer is drained.
> + */
> + pstate = sdhci_readl(host, SDHCI_PRESENT_STATE);
> + while (pstate & SDHCI_DATA_AVAILABLE) {
> + sdhci_readl(host, SDHCI_BUFFER);
> + pstate = sdhci_readl(host, SDHCI_PRESENT_STATE);
> + if (count-- == 0) {
> + dev_warn(mmc_dev(host->mmc),
> + "CQE may get stuck because the Buffer Read Enable bit is set\n");
> + break;
> + }
> + mdelay(1);
> + }
> +
> + sdhci_writew(host, DWCMCHC_SDHCI_CQE_TRNS_MODE, SDHCI_TRANSFER_MODE);
> +
> + sdhci_cqe_enable(mmc);
> +
> + /*
> + * The "DesignWare Cores Mobile Storage Host Controller
> + * DWC_mshc / DWC_mshc_lite Databook" says:
> + * when Host Version 4 Enable" is 1 in Host Control 2 register,
> + * SDHCI_CTRL_ADMA32 bit means ADMA2 is selected.
> + * Selection of 32-bit/64-bit System Addressing:
> + * either 32-bit or 64-bit system addressing is selected by
> + * 64-bit Addressing bit in Host Control 2 register.
> + *
> + * On the other hand the "DesignWare Cores Mobile Storage Host
> + * Controller DWC_mshc / DWC_mshc_lite User Guide" says, that we have to
> + * set DMA_SEL to ADMA2 _only_ mode in the Host Control 2 register.
> + */
> + ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
> + ctrl &= ~SDHCI_CTRL_DMA_MASK;
> + ctrl |= SDHCI_CTRL_ADMA32;
> + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
> +}
> +
> static void dwcmshc_rk3568_set_clock(struct sdhci_host *host, unsigned int clock)
> {
> struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> @@ -344,6 +412,7 @@ static const struct sdhci_ops sdhci_dwcmshc_ops = {
> .get_max_clock = dwcmshc_get_max_clock,
> .reset = sdhci_reset,
> .adma_write_desc = dwcmshc_adma_write_desc,
> + .irq = dwcmshc_cqe_irq_handler,
> };
>
> static const struct sdhci_ops sdhci_dwcmshc_rk35xx_ops = {
> @@ -378,6 +447,74 @@ static const struct sdhci_pltfm_data sdhci_dwcmshc_rk35xx_pdata = {
> SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN,
> };
>
> +static void dwcmshc_cqhci_dumpregs(struct mmc_host *mmc)
> +{
> + sdhci_dumpregs(mmc_priv(mmc));
> +}
> +
> +static const struct cqhci_host_ops dwcmshc_cqhci_ops = {
> + .enable = dwcmshc_sdhci_cqe_enable,
> + .disable = sdhci_cqe_disable,
> + .dumpregs = dwcmshc_cqhci_dumpregs,
> +};
> +
> +static void dwcmshc_cqhci_init(struct sdhci_host *host, struct platform_device *pdev)
> +{
> + struct cqhci_host *cq_host;
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host);
> + bool dma64 = false;
> + u16 clk;
> + int err;
> +
> + host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;
> + cq_host = devm_kzalloc(&pdev->dev, sizeof(*cq_host), GFP_KERNEL);
> + if (!cq_host) {
> + dev_err(mmc_dev(host->mmc), "Unable to setup CQE: not enough memory\n");
> + return;
> + }
> +
> + /*
> + * For dwcmshc host controller we have to enable internal clock
> + * before access to some registers from Vendor Specific Aria 2.
> + */
> + clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
> + clk |= SDHCI_CLOCK_INT_EN;
> + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
> + clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
> + if (!(clk & SDHCI_CLOCK_INT_EN)) {
> + dev_err(mmc_dev(host->mmc), "Unable to setup CQE: internal clock enable error\n");
> + goto free_cq_host;
> + }
> +
> + cq_host->mmio = host->ioaddr + priv->vendor_specific_area2;
> + cq_host->ops = &dwcmshc_cqhci_ops;
> +
> + /* Enable using of 128-bit task descriptors */
> + dma64 = host->flags & SDHCI_USE_64_BIT_DMA;
> + if (dma64) {
> + dev_dbg(mmc_dev(host->mmc), "128-bit task descriptors\n");
> + cq_host->caps |= CQHCI_TASK_DESC_SZ_128;
> + }
> + err = cqhci_init(cq_host, host->mmc, dma64);
> + if (err) {
> + dev_err(mmc_dev(host->mmc), "Unable to setup CQE: error %d\n", err);
> + goto int_clok_disable;
> + }
> +
> + dev_dbg(mmc_dev(host->mmc), "CQE init done\n");
> +
> + return;
> +
> +int_clok_disable:
> + clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
> + clk &= ~SDHCI_CLOCK_INT_EN;
> + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
> +
> +free_cq_host:
> + devm_kfree(&pdev->dev, cq_host);
> +}
> +
> static int dwcmshc_rk35xx_init(struct sdhci_host *host, struct dwcmshc_priv *dwc_priv)
> {
> int err;
> @@ -471,6 +608,7 @@ static int dwcmshc_probe(struct platform_device *pdev)
> const struct sdhci_pltfm_data *pltfm_data;
> int err;
> u32 extra;
> + u32 caps;
>
> pltfm_data = device_get_match_data(&pdev->dev);
> if (!pltfm_data) {
> @@ -518,6 +656,8 @@ static int dwcmshc_probe(struct platform_device *pdev)
>
> priv->vendor_specific_area1 =
> sdhci_readl(host, DWCMSHC_P_VENDOR_AREA1) & DWCMSHC_AREA1_MASK;
> + priv->vendor_specific_area2 =
> + sdhci_readw(host, DWCMSHC_P_VENDOR_AREA2);
>
> host->mmc_host_ops.request = dwcmshc_request;
> host->mmc_host_ops.hs400_enhanced_strobe = dwcmshc_hs400_enhanced_strobe;
> @@ -546,12 +686,24 @@ static int dwcmshc_probe(struct platform_device *pdev)
> sdhci_enable_v4_mode(host);
> #endif
>
> + caps = sdhci_readl(host, SDHCI_CAPABILITIES);
> + if (caps & SDHCI_CAN_64BIT_V4)
> + sdhci_enable_v4_mode(host);
> +
> host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY;
>
> err = sdhci_setup_host(host);
> if (err)
> goto err_clk;
>
> + /* Setup Command Queue Engine if enabled */
> + if (device_property_read_bool(&pdev->dev, "supports-cqe")) {
> + if (caps & SDHCI_CAN_64BIT_V4)
> + dwcmshc_cqhci_init(host, pdev);
> + else
> + dev_warn(dev, "Cannot enable CQE without V4 mode support\n");
> + }
> +
> if (rk_priv)
> dwcmshc_rk35xx_postinit(host, priv);
>
Powered by blists - more mailing lists