Message-ID: <CAJZ5v0gHbbs+ipB1D37vBGHwpgN9qSW29K_mCJCSqBD1sjvkKA@mail.gmail.com>
Date:   Tue, 29 Aug 2023 18:51:27 +0200
From:   "Rafael J. Wysocki" <rafael@...nel.org>
To:     Daniel Lezcano <daniel.lezcano@...aro.org>
Cc:     "Rafael J. Wysocki" <rjw@...ysocki.net>,
        Mikko Perttunen <mperttunen@...dia.com>,
        Yinbo Zhu <zhuyinbo@...ngson.cn>,
        Li Zetao <lizetao1@...wei.com>,
        Andrei Coardos <aboutphysycs@...il.com>,
        Nícolas F. R. A. Prado 
        <nfraprado@...labora.com>,
        Krzysztof Kozlowski <k.kozlowski@...sung.com>,
        Ruan Jinjie <ruanjinjie@...wei.com>,
        Chen Jiahao <chenjiahao16@...wei.com>,
        Mark Brown <broonie@...nel.org>,
        Yangtao Li <frank.li@...o.com>,
        Min-Hua Chen <minhuadotchen@...il.com>,
        Ahmad Fatoum <a.fatoum@...gutronix.de>,
        Minjie Du <duminjie@...o.com>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Linux PM mailing list <linux-pm@...r.kernel.org>
Subject: Re: [GIT PULL] thermal material for v6.6-rc1

Hi Daniel,

On Tue, Aug 29, 2023 at 3:11 PM Daniel Lezcano
<daniel.lezcano@...aro.org> wrote:
>
>
> Hi Rafael,
>
> please consider this pull request for the thermal material
>
> Thanks
>
> The following changes since commit f6a756e8fb12923f0e3996a575e935e94f3594eb:
>
>    thermal: Explicitly include correct DT includes (2023-07-31 20:03:42
> +0200)
>
> are available in the Git repository at:
>
>
> ssh://git@...olite.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git
> tags/thermal-v6.6-rc1
>
> for you to fetch changes up to 1ef5a9f61457b921158ef03f3a2b3e789b41be9f:
>
>    thermal/drivers/tegra-bpmp: Check if BPMP supports trip points
> (2023-08-22 19:10:28 +0200)
>
> ----------------------------------------------------------------
> - Check if the Tegra BPMP supports the trip points in order to set the
>    .set_trips callback (Mikko Perttunen)
>
> - Add the new Loongson-2 thermal sensor along with the DT bindings
>    (Yinbo Zhu)
>
> - Use IS_ERR_OR_NULL helper to replace a double test on the TI bandgap
>    sensor (Li Zetao)
>
> - Remove the call to platform_set_drvdata() as there is no call to
>    platform_get_drvdata() in a bunch of drivers where that happens
>    (Andrei Coardos)
>
> - Switch the Mediatek LVTS mode to filtered in order to enable the
>    interrupts (Nícolas F. R. A. Prado)
>
> - Fix Wvoid-pointer-to-enum-cast warning on the Exynos TMU (Krzysztof
>    Kozlowski)
>
> - Remove redundant usage of of_match_ptr() as the driver db8500
>    already depends on CONFIG_OF (Ruan Jinjie)
>
> - Remove redundant dev_err_probe() because the underlying function
>    already called it in the Mediatek sensor (Chen Jiahao)
>
> - Free calibration nvmem after reading it on sun8i (Mark Brown)
>
> - Remove useless comment in the code on sun8i (Yangtao Li)
>
> - Make tsens_xxxx_nvmem static to fix sparse warning on QCom tsens
> (Min-Hua Chen)
>
> - Remove error message at probe deferral on imx8mm (Ahmad Fatoum)
>
> - Fix parameter check in lvts_debugfs_init with IS_ERR on Mediatek
>    LVTS (Minjie Du)
>
> - Fix the interrupt routine and configuratoin for the Mediatek LVTS
>    (Nícolas F. R. A. Prado)
>
> ----------------------------------------------------------------
> Ahmad Fatoum (1):
>        thermal/drivers/imx8mm: Suppress log message on probe deferral
>
> Andrei Coardos (8):
>        thermal/drivers/broadcom/sr-thermal: Removed call to
> platform_set_drvdata()
>        thermal/drivers/k3_j72xx_bandgap: Removed unneeded call to
> platform_set_drvdata()
>        thermal/drivers/k3_bandgap: Remove unneeded call to
> platform_set_drvdata()
>        thermal/drivers/broadcom/brcstb_thermal: Removed unneeded
> platform_set_drvdata()
>        thermal/drivers/sun8i_thermal: Remove unneeded call to
> platform_set_drvdata()
>        thermal/drivers/mediatek/auxadc_thermal: Removed call to
> platform_set_drvdata()
>        thermal/drivers/max77620_thermal: Removed unneeded call to
> platform_set_drvdata()
>        thermal/drivers/generic-adc: Removed unneeded call to
> platform_set_drvdata()
>
> Chen Jiahao (1):
>        thermal/drivers/mediatek: Clean up redundant dev_err_probe()
>
> Krzysztof Kozlowski (1):
>        thermal/drivers/samsung: Fix Wvoid-pointer-to-enum-cast warning
>
> Li Zetao (1):
>        thermal/drivers/ti-soc-thermal: Use helper function IS_ERR_OR_NULL()
>
> Mark Brown (1):
>        thermal/drivers/sun8i: Free calibration nvmem after reading it
>
> Mikko Perttunen (1):
>        thermal/drivers/tegra-bpmp: Check if BPMP supports trip points
>
> Min-Hua Chen (1):
>        thermal/drivers/tsens: Make tsens_xxxx_nvmem static
>
> Minjie Du (1):
>        thermal/drivers/mediatek/lvts: Fix parameter check in
> lvts_debugfs_init()
>
> Nícolas F. R. A. Prado (7):
>        thermal/drivers/mediatek/lvts_thermal: Handle IRQ on all controllers
>        thermal/drivers/mediatek/lvts_thermal: Honor sensors in immediate
> mode
>        thermal/drivers/mediatek/lvts_thermal: Use offset threshold for IRQ
>        thermal/drivers/mediatek/lvts_thermal: Disable undesired interrupts
>        thermal/drivers/mediatek/lvts_thermal: Don't leave threshold zeroed
>        thermal/drivers/mediatek/lvts_thermal: Manage threshold between
> sensors
>        thermal/drivers/mediatek/lvts_thermal: Make readings valid in
> filtered mode
>
> Ruan Jinjie (1):
>        thermal/drivers/db8500: Remove redundant of_match_ptr()
>
> Yangtao Li (1):
>        thermal/drivers/sun8i: Remove unneeded comments
>
> Yinbo Zhu (2):
>        thermal/drivers/loongson-2: Add thermal management support
>        thermal: dt-bindings: add loongson-2 thermal

Pulled, merged into the thermal branch and added to the linux-next
branch in linux-pm.git.

Thanks!

Powered by blists - more mailing lists