linux-kernel - [PATCH v5 7/8] x86/resctrl: Update documentation with Sub-NUMA cluster changes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20230829234426.64421-8-tony.luck@intel.com>
Date:   Tue, 29 Aug 2023 16:44:25 -0700
From:   Tony Luck <tony.luck@...el.com>
To:     Fenghua Yu <fenghua.yu@...el.com>,
        Reinette Chatre <reinette.chatre@...el.com>,
        Peter Newman <peternewman@...gle.com>,
        Jonathan Corbet <corbet@....net>,
        Shuah Khan <skhan@...uxfoundation.org>, x86@...nel.org
Cc:     Shaopeng Tan <tan.shaopeng@...itsu.com>,
        James Morse <james.morse@....com>,
        Jamie Iles <quic_jiles@...cinc.com>,
        Babu Moger <babu.moger@....com>,
        Randy Dunlap <rdunlap@...radead.org>,
        linux-kernel@...r.kernel.org, linux-doc@...r.kernel.org,
        patches@...ts.linux.dev, Tony Luck <tony.luck@...el.com>
Subject: [PATCH v5 7/8] x86/resctrl: Update documentation with Sub-NUMA cluster changes

With Sub-NUMA Cluster mode enabled the scope of monitoring resources is
per-NODE instead of per-L3 cache. Suffixes of directories with "L3" in
their name refer to Sub-NUMA nodes instead of L3 cache ids.

Users should be aware that SNC mode also affects the amount of L3 cache
available for allocation within each SNC node.

Signed-off-by: Tony Luck <tony.luck@...el.com>
---
 Documentation/arch/x86/resctrl.rst | 25 ++++++++++++++++++++++---
 1 file changed, 22 insertions(+), 3 deletions(-)

diff --git a/Documentation/arch/x86/resctrl.rst b/Documentation/arch/x86/resctrl.rst
index cb05d90111b4..407764f43f25 100644
--- a/Documentation/arch/x86/resctrl.rst
+++ b/Documentation/arch/x86/resctrl.rst
@@ -345,9 +345,15 @@ When control is enabled all CTRL_MON groups will also contain:
 When monitoring is enabled all MON groups will also contain:
 
 "mon_data":
-	This contains a set of files organized by L3 domain and by
-	RDT event. E.g. on a system with two L3 domains there will
-	be subdirectories "mon_L3_00" and "mon_L3_01".	Each of these
+	This contains a set of files organized by L3 domain or by NUMA
+	node (depending on whether Sub-NUMA Cluster (SNC) mode is disabled
+	or enabled respectively) and by RDT event. E.g. on a system with
+	SNC mode disabled with two L3 domains there will be subdirectories
+	"mon_L3_00" and "mon_L3_01". The numerical suffix refers to the
+	L3 cache id.  With SNC enabled the directory names are the same,
+	but the numerical suffix refers to the node id.
+        Mappings from node ids to CPUs are available in the
+        /sys/devices/system/node/node*/cpulist files. Each of these
 	directories have one file per event (e.g. "llc_occupancy",
 	"mbm_total_bytes", and "mbm_local_bytes"). In a MON group these
 	files provide a read out of the current value of the event for
@@ -452,6 +458,19 @@ and 0xA are not.  On a system with a 20-bit mask each bit represents 5%
 of the capacity of the cache. You could partition the cache into four
 equal parts with masks: 0x1f, 0x3e0, 0x7c00, 0xf8000.
 
+Notes on Sub-NUMA Cluster mode
+==============================
+When SNC mode is enabled the "llc_occupancy", "mbm_total_bytes", and
+"mbm_local_bytes" will only give accurate results for well behaved NUMA
+applications. I.e. those that perform the majority of memory accesses
+to memory on the local NUMA node to the CPU where the task is executing.
+
+The cache allocation feature still provides the same number of
+bits in a mask to control allocation into the L3 cache. But each
+of those ways has its capacity reduced because the cache is divided
+between the SNC nodes. The values reported in the resctrl
+"size" files are adjusted accordingly.
+
 Memory bandwidth Allocation and monitoring
 ==========================================
 
-- 
2.41.0