| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230829091853.626011-11-m.majewski2@samsung.com>
Date: Tue, 29 Aug 2023 11:18:48 +0200
From: Mateusz Majewski <m.majewski2@...sung.com>
To: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-pm@...r.kernel.org
Cc: Mateusz Majewski <m.majewski2@...sung.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Alim Akhtar <alim.akhtar@...sung.com>,
Bartlomiej Zolnierkiewicz <bzolnier@...il.com>,
"Rafael J. Wysocki" <rafael@...nel.org>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Amit Kucheria <amitk@...nel.org>,
Zhang Rui <rui.zhang@...el.com>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Marek Szyprowski <m.szyprowski@...sung.com>
Subject: [PATCH 10/11] thermal: exynos: use set_trips
Currently, each trip point defined in the device tree corresponds to a
single hardware interrupt. This commit instead switches to using two
hardware interrupts, whose values are set dynamically using the
set_trips callback. Additionally, the critical temperature threshold is
handled specifically.
Setting interrupts in this way also fixes a long-standing lockdep
warning, which was caused by calling thermal_zone_get_trips with our
lock being held. Do note that this requires TMU initialization to be
split into two parts, as done by the parent commit: parts of the
initialization call into the thermal_zone_device structure and so must
be done after its registration, but the initialization is also
responsible for setting up calibration, which must be done before
thermal_zone_device registration, which will call set_trips for the
first time; if the calibration is not done in time, the interrupt values
will be silently wrong!
Signed-off-by: Mateusz Majewski <m.majewski2@...sung.com>
---
drivers/thermal/samsung/exynos_tmu.c | 390 +++++++++++++++------------
1 file changed, 217 insertions(+), 173 deletions(-)
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index aa3de367b3c7..5b35c51fca79 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -159,7 +159,6 @@ enum soc_type {
* 0 < reference_voltage <= 31
* @reg_conf: pointer to structure to register with core thermal.
* @tzd: pointer to thermal_zone_device structure
- * @ntrip: number of supported trip points.
* @enabled: current status of TMU device
* @tmu_set_trip_temp: SoC specific method to set trip (rising threshold)
* @tmu_set_trip_hyst: SoC specific to set hysteresis (falling threshold)
@@ -184,13 +183,13 @@ struct exynos_tmu_data {
u8 gain;
u8 reference_voltage;
struct thermal_zone_device *tzd;
- unsigned int ntrip;
bool enabled;
- void (*tmu_set_trip_temp)(struct exynos_tmu_data *data, int trip,
- u8 temp);
- void (*tmu_set_trip_hyst)(struct exynos_tmu_data *data, int trip,
- u8 temp, u8 hyst);
+ void (*tmu_set_low_temp)(struct exynos_tmu_data *data, u8 temp);
+ void (*tmu_set_high_temp)(struct exynos_tmu_data *data, u8 temp);
+ void (*tmu_set_crit_temp)(struct exynos_tmu_data *data, u8 temp);
+ void (*tmu_disable_low)(struct exynos_tmu_data *data);
+ void (*tmu_disable_high)(struct exynos_tmu_data *data);
void (*tmu_initialize)(struct platform_device *pdev);
void (*tmu_control)(struct platform_device *pdev, bool on);
int (*tmu_read)(struct exynos_tmu_data *data);
@@ -274,43 +273,24 @@ static int exynos_thermal_zone_configure(struct platform_device *pdev)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct thermal_zone_device *tzd = data->tzd;
- int num_trips = thermal_zone_get_num_trips(tzd);
int ret = 0, temp;
ret = thermal_zone_get_crit_temp(tzd, &temp);
-
- if (ret && data->soc != SOC_ARCH_EXYNOS5433) { /* FIXME */
- dev_err(&pdev->dev,
- "No CRITICAL trip point defined in device tree!\n");
- goto err;
- }
-
- mutex_lock(&data->lock);
-
- if (num_trips > data->ntrip) {
- dev_info(&pdev->dev,
- "More trip points than supported by this TMU.\n");
- dev_info(&pdev->dev,
- "%d trip points should be configured in polling mode.\n",
- num_trips - data->ntrip);
- }
-
- int i, ntrips = min_t(int, num_trips, data->ntrip);
-
- /* Write temperature code for rising and falling threshold */
- for (i = 0; i < ntrips; i++) {
- struct thermal_trip trip;
-
- ret = thermal_zone_get_trip(tzd, i, &trip);
- if (ret)
+ if (ret) {
+ if (data->soc ==
+ SOC_ARCH_EXYNOS5433) { /* FIXME: Remove this and the check below */
+ temp = INT_MAX;
+ ret = 0;
+ } else {
+ dev_err(&pdev->dev,
+ "No CRITICAL trip point defined in device tree!\n");
goto err;
-
- data->tmu_set_trip_temp(data, i, trip.temperature / MCELSIUS);
- data->tmu_set_trip_hyst(data, i, trip.temperature / MCELSIUS,
- trip.hysteresis / MCELSIUS);
+ }
}
- mutex_unlock(&data->lock);
+ if (temp < INT_MAX)
+ data->tmu_set_crit_temp(data, temp / MCELSIUS);
+
err:
return ret;
}
@@ -343,17 +323,56 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
mutex_unlock(&data->lock);
}
-static void exynos4210_tmu_set_trip_temp(struct exynos_tmu_data *data,
- int trip_id, u8 temp)
+static void exynos_tmu_update_bit(struct exynos_tmu_data *data, int reg_off,
+ int bit_off, bool enable)
{
- temp = temp_to_code(data, temp);
- writeb(temp, data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0 + trip_id * 4);
+ u32 interrupt_en;
+
+ interrupt_en = readl(data->base + reg_off);
+ if (enable)
+ interrupt_en |= 1 << bit_off;
+ else
+ interrupt_en &= ~(1 << bit_off);
+ writel(interrupt_en, data->base + reg_off);
}
-/* failing thresholds are not supported on Exynos4210 */
-static void exynos4210_tmu_set_trip_hyst(struct exynos_tmu_data *data,
- int trip, u8 temp, u8 hyst)
+static void exynos4210_tmu_set_low_temp(struct exynos_tmu_data *data, u8 temp)
{
+ /* Failing thresholds are not supported on Exynos 4210.
+ * We use polling instead.
+ */
+}
+
+static void exynos4210_tmu_set_high_temp(struct exynos_tmu_data *data, u8 temp)
+{
+ temp = temp_to_code(data, temp);
+ writeb(temp, data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0 + 4);
+ exynos_tmu_update_bit(data, EXYNOS_TMU_REG_INTEN,
+ EXYNOS_TMU_INTEN_RISE0_SHIFT + 4, true);
+}
+
+static void exynos4210_tmu_disable_low(struct exynos_tmu_data *data)
+{
+ /* Again, this is handled by polling. */
+}
+
+static void exynos4210_tmu_disable_high(struct exynos_tmu_data *data)
+{
+ exynos_tmu_update_bit(data, EXYNOS_TMU_REG_INTEN,
+ EXYNOS_TMU_INTEN_RISE0_SHIFT + 4, false);
+}
+
+static void exynos4210_tmu_set_crit_temp(struct exynos_tmu_data *data, u8 temp)
+{
+ /* Hardware critical temperature handling is not supported on Exynos 4210.
+ * We still set the critical temperature threshold, but this is only to
+ * make sure it is handled as soon as possible. It is just a normal interrupt.
+ */
+
+ temp = temp_to_code(data, temp);
+ writeb(temp, data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0 + 12);
+ exynos_tmu_update_bit(data, EXYNOS_TMU_REG_INTEN,
+ EXYNOS_TMU_INTEN_RISE0_SHIFT + 12, true);
}
static void exynos4210_tmu_initialize(struct platform_device *pdev)
@@ -365,33 +384,49 @@ static void exynos4210_tmu_initialize(struct platform_device *pdev)
writeb(0, data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP);
}
-static void exynos4412_tmu_set_trip_temp(struct exynos_tmu_data *data,
- int trip, u8 temp)
-{
- u32 th, con;
-
- th = readl(data->base + EXYNOS_THD_TEMP_RISE);
- th &= ~(0xff << 8 * trip);
- th |= temp_to_code(data, temp) << 8 * trip;
- writel(th, data->base + EXYNOS_THD_TEMP_RISE);
-
- if (trip == 3) {
- con = readl(data->base + EXYNOS_TMU_REG_CONTROL);
- con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT);
- writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
- }
-}
-
-static void exynos4412_tmu_set_trip_hyst(struct exynos_tmu_data *data,
- int trip, u8 temp, u8 hyst)
+static void exynos4412_tmu_set_low_temp(struct exynos_tmu_data *data, u8 temp)
{
u32 th;
th = readl(data->base + EXYNOS_THD_TEMP_FALL);
- th &= ~(0xff << 8 * trip);
- if (hyst)
- th |= temp_to_code(data, temp - hyst) << 8 * trip;
+ th &= ~(0xff << 0);
+ th |= temp_to_code(data, temp) << 0;
writel(th, data->base + EXYNOS_THD_TEMP_FALL);
+
+ exynos_tmu_update_bit(data, EXYNOS_TMU_REG_INTEN,
+ EXYNOS_TMU_INTEN_FALL0_SHIFT, true);
+}
+
+static void exynos4412_tmu_set_high_temp(struct exynos_tmu_data *data, u8 temp)
+{
+ u32 th;
+
+ th = readl(data->base + EXYNOS_THD_TEMP_RISE);
+ th &= ~(0xff << 8);
+ th |= temp_to_code(data, temp) << 8;
+ writel(th, data->base + EXYNOS_THD_TEMP_RISE);
+
+ exynos_tmu_update_bit(data, EXYNOS_TMU_REG_INTEN,
+ EXYNOS_TMU_INTEN_RISE0_SHIFT + 4, true);
+}
+
+static void exynos4412_tmu_disable_low(struct exynos_tmu_data *data)
+{
+ exynos_tmu_update_bit(data, EXYNOS_TMU_REG_INTEN,
+ EXYNOS_TMU_INTEN_FALL0_SHIFT, false);
+}
+
+static void exynos4412_tmu_set_crit_temp(struct exynos_tmu_data *data, u8 temp)
+{
+ u32 th;
+
+ th = readl(data->base + EXYNOS_THD_TEMP_RISE);
+ th &= ~(0xff << 24);
+ th |= temp_to_code(data, temp) << 24;
+ writel(th, data->base + EXYNOS_THD_TEMP_RISE);
+
+ exynos_tmu_update_bit(data, EXYNOS_TMU_REG_CONTROL,
+ EXYNOS_TMU_THERM_TRIP_EN_SHIFT, true);
}
static void exynos4412_tmu_initialize(struct platform_device *pdev)
@@ -421,44 +456,57 @@ static void exynos4412_tmu_initialize(struct platform_device *pdev)
sanitize_temp_error(data, trim_info);
}
-static void exynos5433_tmu_set_trip_temp(struct exynos_tmu_data *data,
- int trip, u8 temp)
+static void exynos5433_tmu_set_low_temp(struct exynos_tmu_data *data, u8 temp)
{
- unsigned int reg_off, j;
u32 th;
- if (trip > 3) {
- reg_off = EXYNOS5433_THD_TEMP_RISE7_4;
- j = trip - 4;
- } else {
- reg_off = EXYNOS5433_THD_TEMP_RISE3_0;
- j = trip;
- }
+ th = readl(data->base + EXYNOS5433_THD_TEMP_FALL3_0);
+ th &= ~(0xff << 0);
+ th |= temp_to_code(data, temp) << 0;
+ writel(th, data->base + EXYNOS5433_THD_TEMP_FALL3_0);
- th = readl(data->base + reg_off);
- th &= ~(0xff << j * 8);
- th |= (temp_to_code(data, temp) << j * 8);
- writel(th, data->base + reg_off);
+ exynos_tmu_update_bit(data, EXYNOS5433_TMU_REG_INTEN,
+ EXYNOS_TMU_INTEN_FALL0_SHIFT, true);
}
-static void exynos5433_tmu_set_trip_hyst(struct exynos_tmu_data *data,
- int trip, u8 temp, u8 hyst)
+static void exynos5433_tmu_set_high_temp(struct exynos_tmu_data *data, u8 temp)
{
- unsigned int reg_off, j;
u32 th;
- if (trip > 3) {
- reg_off = EXYNOS5433_THD_TEMP_FALL7_4;
- j = trip - 4;
- } else {
- reg_off = EXYNOS5433_THD_TEMP_FALL3_0;
- j = trip;
- }
+ th = readl(data->base + EXYNOS5433_THD_TEMP_RISE3_0);
+ th &= ~(0xff << 8);
+ th |= temp_to_code(data, temp) << 8;
+ writel(th, data->base + EXYNOS5433_THD_TEMP_RISE3_0);
- th = readl(data->base + reg_off);
- th &= ~(0xff << j * 8);
- th |= (temp_to_code(data, temp - hyst) << j * 8);
- writel(th, data->base + reg_off);
+ exynos_tmu_update_bit(data, EXYNOS5433_TMU_REG_INTEN,
+ EXYNOS7_TMU_INTEN_RISE0_SHIFT + 1, true);
+}
+
+static void exynos5433_tmu_disable_low(struct exynos_tmu_data *data)
+{
+ exynos_tmu_update_bit(data, EXYNOS5433_TMU_REG_INTEN,
+ EXYNOS_TMU_INTEN_FALL0_SHIFT, false);
+}
+
+static void exynos5433_tmu_disable_high(struct exynos_tmu_data *data)
+{
+ exynos_tmu_update_bit(data, EXYNOS5433_TMU_REG_INTEN,
+ EXYNOS7_TMU_INTEN_RISE0_SHIFT + 1, false);
+}
+
+static void exynos5433_tmu_set_crit_temp(struct exynos_tmu_data *data, u8 temp)
+{
+ u32 th;
+
+ th = readl(data->base + EXYNOS5433_THD_TEMP_RISE7_4);
+ th &= ~(0xff << 24);
+ th |= temp_to_code(data, temp) << 24;
+ writel(th, data->base + EXYNOS5433_THD_TEMP_RISE7_4);
+
+ exynos_tmu_update_bit(data, EXYNOS_TMU_REG_CONTROL,
+ EXYNOS_TMU_THERM_TRIP_EN_SHIFT, true);
+ exynos_tmu_update_bit(data, EXYNOS5433_TMU_REG_INTEN,
+ EXYNOS7_TMU_INTEN_RISE0_SHIFT + 7, true);
}
static void exynos5433_tmu_initialize(struct platform_device *pdev)
@@ -494,34 +542,47 @@ static void exynos5433_tmu_initialize(struct platform_device *pdev)
cal_type ? 2 : 1);
}
-static void exynos7_tmu_set_trip_temp(struct exynos_tmu_data *data,
- int trip, u8 temp)
+static void exynos7_tmu_update_temp(struct exynos_tmu_data *data, u8 temp,
+ int idx, bool rise)
{
unsigned int reg_off, bit_off;
u32 th;
+ void __iomem *reg;
- reg_off = ((7 - trip) / 2) * 4;
- bit_off = ((8 - trip) % 2);
+ reg_off = ((7 - idx) / 2) * 4;
+ bit_off = ((8 - idx) % 2);
- th = readl(data->base + EXYNOS7_THD_TEMP_RISE7_6 + reg_off);
+ reg = data->base +
+ (rise ? EXYNOS7_THD_TEMP_RISE7_6 : EXYNOS7_THD_TEMP_FALL7_6) +
+ reg_off;
+ th = readl(reg);
th &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off));
th |= temp_to_code(data, temp) << (16 * bit_off);
- writel(th, data->base + EXYNOS7_THD_TEMP_RISE7_6 + reg_off);
+ writel(th, reg);
+
+ exynos_tmu_update_bit(data, EXYNOS5433_TMU_REG_INTEN,
+ (rise ? EXYNOS7_TMU_INTEN_RISE0_SHIFT :
+ EXYNOS_TMU_INTEN_FALL0_SHIFT) +
+ idx,
+ true);
}
-static void exynos7_tmu_set_trip_hyst(struct exynos_tmu_data *data,
- int trip, u8 temp, u8 hyst)
+static void exynos7_tmu_set_low_temp(struct exynos_tmu_data *data, u8 temp)
{
- unsigned int reg_off, bit_off;
- u32 th;
+ exynos7_tmu_update_temp(data, temp, 0, false);
+}
- reg_off = ((7 - trip) / 2) * 4;
- bit_off = ((8 - trip) % 2);
+static void exynos7_tmu_set_high_temp(struct exynos_tmu_data *data, u8 temp)
+{
+ exynos7_tmu_update_temp(data, temp, 1, true);
+}
- th = readl(data->base + EXYNOS7_THD_TEMP_FALL7_6 + reg_off);
- th &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off));
- th |= temp_to_code(data, temp - hyst) << (16 * bit_off);
- writel(th, data->base + EXYNOS7_THD_TEMP_FALL7_6 + reg_off);
+static void exynos7_tmu_set_crit_temp(struct exynos_tmu_data *data, u8 temp)
+{
+ /* Like Exynos 4210, Exynos 7 does not seem to support critical temperature
+ * handling in hardware. Again, we still set a separate interrupt for it.
+ */
+ exynos7_tmu_update_temp(data, temp, 7, true);
}
static void exynos7_tmu_initialize(struct platform_device *pdev)
@@ -536,87 +597,44 @@ static void exynos7_tmu_initialize(struct platform_device *pdev)
static void exynos4210_tmu_control(struct platform_device *pdev, bool on)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
- struct thermal_zone_device *tz = data->tzd;
- struct thermal_trip trip;
- unsigned int con, interrupt_en = 0, i;
+ unsigned int con;
con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
- if (on) {
- for (i = 0; i < data->ntrip; i++) {
- if (thermal_zone_get_trip(tz, i, &trip))
- continue;
-
- interrupt_en |=
- (1 << (EXYNOS_TMU_INTEN_RISE0_SHIFT + i * 4));
- }
-
- if (data->soc != SOC_ARCH_EXYNOS4210)
- interrupt_en |=
- interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
-
+ if (on)
con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
- } else {
+ else
con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
- }
- writel(interrupt_en, data->base + EXYNOS_TMU_REG_INTEN);
writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
}
static void exynos5433_tmu_control(struct platform_device *pdev, bool on)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
- struct thermal_zone_device *tz = data->tzd;
- struct thermal_trip trip;
- unsigned int con, interrupt_en = 0, pd_det_en, i;
+ unsigned int con, pd_det_en;
con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
- if (on) {
- for (i = 0; i < data->ntrip; i++) {
- if (thermal_zone_get_trip(tz, i, &trip))
- continue;
-
- interrupt_en |=
- (1 << (EXYNOS7_TMU_INTEN_RISE0_SHIFT + i));
- }
-
- interrupt_en |=
- interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
-
+ if (on)
con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
- } else
+ else
con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
pd_det_en = on ? EXYNOS5433_PD_DET_EN : 0;
writel(pd_det_en, data->base + EXYNOS5433_TMU_PD_DET_EN);
- writel(interrupt_en, data->base + EXYNOS5433_TMU_REG_INTEN);
writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
}
static void exynos7_tmu_control(struct platform_device *pdev, bool on)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
- struct thermal_zone_device *tz = data->tzd;
- struct thermal_trip trip;
- unsigned int con, interrupt_en = 0, i;
+ unsigned int con;
con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
if (on) {
- for (i = 0; i < data->ntrip; i++) {
- if (thermal_zone_get_trip(tz, i, &trip))
- continue;
-
- interrupt_en |=
- (1 << (EXYNOS7_TMU_INTEN_RISE0_SHIFT + i));
- }
-
- interrupt_en |=
- interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
-
con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
con |= (1 << EXYNOS7_PD_DET_EN_SHIFT);
} else {
@@ -624,7 +642,6 @@ static void exynos7_tmu_control(struct platform_device *pdev, bool on)
con &= ~(1 << EXYNOS7_PD_DET_EN_SHIFT);
}
- writel(interrupt_en, data->base + EXYNOS7_TMU_REG_INTEN);
writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
}
@@ -856,13 +873,15 @@ static int exynos_map_dt_data(struct platform_device *pdev)
switch (data->soc) {
case SOC_ARCH_EXYNOS4210:
- data->tmu_set_trip_temp = exynos4210_tmu_set_trip_temp;
- data->tmu_set_trip_hyst = exynos4210_tmu_set_trip_hyst;
+ data->tmu_set_low_temp = exynos4210_tmu_set_low_temp;
+ data->tmu_set_high_temp = exynos4210_tmu_set_high_temp;
+ data->tmu_disable_low = exynos4210_tmu_disable_low;
+ data->tmu_disable_high = exynos4210_tmu_disable_high;
+ data->tmu_set_crit_temp = exynos4210_tmu_set_crit_temp;
data->tmu_initialize = exynos4210_tmu_initialize;
data->tmu_control = exynos4210_tmu_control;
data->tmu_read = exynos4210_tmu_read;
data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
- data->ntrip = 4;
data->gain = 15;
data->reference_voltage = 7;
data->efuse_value = 55;
@@ -875,14 +894,16 @@ static int exynos_map_dt_data(struct platform_device *pdev)
case SOC_ARCH_EXYNOS5260:
case SOC_ARCH_EXYNOS5420:
case SOC_ARCH_EXYNOS5420_TRIMINFO:
- data->tmu_set_trip_temp = exynos4412_tmu_set_trip_temp;
- data->tmu_set_trip_hyst = exynos4412_tmu_set_trip_hyst;
+ data->tmu_set_low_temp = exynos4412_tmu_set_low_temp;
+ data->tmu_set_high_temp = exynos4412_tmu_set_high_temp;
+ data->tmu_disable_low = exynos4412_tmu_disable_low;
+ data->tmu_disable_high = exynos4210_tmu_disable_high;
+ data->tmu_set_crit_temp = exynos4412_tmu_set_crit_temp;
data->tmu_initialize = exynos4412_tmu_initialize;
data->tmu_control = exynos4210_tmu_control;
data->tmu_read = exynos4412_tmu_read;
data->tmu_set_emulation = exynos4412_tmu_set_emulation;
data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
- data->ntrip = 4;
data->gain = 8;
data->reference_voltage = 16;
data->efuse_value = 55;
@@ -894,14 +915,16 @@ static int exynos_map_dt_data(struct platform_device *pdev)
data->max_efuse_value = 100;
break;
case SOC_ARCH_EXYNOS5433:
- data->tmu_set_trip_temp = exynos5433_tmu_set_trip_temp;
- data->tmu_set_trip_hyst = exynos5433_tmu_set_trip_hyst;
+ data->tmu_set_low_temp = exynos5433_tmu_set_low_temp;
+ data->tmu_set_high_temp = exynos5433_tmu_set_high_temp;
+ data->tmu_disable_low = exynos5433_tmu_disable_low;
+ data->tmu_disable_high = exynos5433_tmu_disable_high;
+ data->tmu_set_crit_temp = exynos5433_tmu_set_crit_temp;
data->tmu_initialize = exynos5433_tmu_initialize;
data->tmu_control = exynos5433_tmu_control;
data->tmu_read = exynos4412_tmu_read;
data->tmu_set_emulation = exynos4412_tmu_set_emulation;
data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
- data->ntrip = 8;
data->gain = 8;
if (res.start == EXYNOS5433_G3D_BASE)
data->reference_voltage = 23;
@@ -912,14 +935,16 @@ static int exynos_map_dt_data(struct platform_device *pdev)
data->max_efuse_value = 150;
break;
case SOC_ARCH_EXYNOS7:
- data->tmu_set_trip_temp = exynos7_tmu_set_trip_temp;
- data->tmu_set_trip_hyst = exynos7_tmu_set_trip_hyst;
+ data->tmu_set_low_temp = exynos7_tmu_set_low_temp;
+ data->tmu_set_high_temp = exynos7_tmu_set_high_temp;
+ data->tmu_disable_low = exynos5433_tmu_disable_low;
+ data->tmu_disable_high = exynos5433_tmu_disable_high;
+ data->tmu_set_crit_temp = exynos7_tmu_set_crit_temp;
data->tmu_initialize = exynos7_tmu_initialize;
data->tmu_control = exynos7_tmu_control;
data->tmu_read = exynos7_tmu_read;
data->tmu_set_emulation = exynos4412_tmu_set_emulation;
data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
- data->ntrip = 8;
data->gain = 9;
data->reference_voltage = 17;
data->efuse_value = 75;
@@ -955,9 +980,28 @@ static int exynos_map_dt_data(struct platform_device *pdev)
return 0;
}
+static int exynos_set_trips(struct thermal_zone_device *tz, int low, int high)
+{
+ struct exynos_tmu_data *data = thermal_zone_device_priv(tz);
+
+ mutex_lock(&data->lock);
+ if (low > INT_MIN)
+ data->tmu_set_low_temp(data, low / MCELSIUS);
+ else
+ data->tmu_disable_low(data);
+ if (high < INT_MAX)
+ data->tmu_set_high_temp(data, high / MCELSIUS);
+ else
+ data->tmu_disable_high(data);
+ mutex_unlock(&data->lock);
+
+ return 0;
+}
+
static const struct thermal_zone_device_ops exynos_sensor_ops = {
.get_temp = exynos_get_temp,
.set_emul_temp = exynos_tmu_set_emulation,
+ .set_trips = exynos_set_trips,
};
static int exynos_tmu_probe(struct platform_device *pdev)
--
2.41.0
Powered by blists - more mailing lists