[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230829095423.760641-1-quic_gokulsri@quicinc.com>
Date: Tue, 29 Aug 2023 15:24:20 +0530
From: Gokul Sriram Palanisamy <quic_gokulsri@...cinc.com>
To: <agross@...nel.org>, <andersson@...nel.org>,
<konrad.dybcio@...aro.org>, <mturquette@...libre.com>,
<sboyd@...nel.org>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <jassisinghbrar@...il.com>,
<linux-arm-msm@...r.kernel.org>, <linux-clk@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC: <quic_varada@...cinc.com>, <quic_srichara@...cinc.com>,
<quic_gokulsri@...cinc.com>
Subject: [PATCH 0/3] Add APSS clock driver support for IPQ5018
This series adds support for the APSS clock to bump the CPU frequency
above 800MHz. APSS PLL found in the IPQ5018 is of type Stromer.
- The first patch in the series adds the required a53pll compatible.
- The second patch adds Stormer PLL offsets, its configuration values and
regmap and modify probe to reuse clk_stromer_pll_configure() for Stormer
which was added for Stormer Plus.
- The third patch adds dts nodes to enable the pll along with the cpu
operating frequency table.
Gokul Sriram Palanisamy (3):
dt-bindings: clock: qcom,a53pll: add IPQ5018 compatible
clk: qcom: apss-ipq-pll: add support for IPQ5018
arm64: dts: qcom: ipq5018: enable the CPUFreq support
.../bindings/clock/qcom,a53pll.yaml | 1 +
arch/arm64/boot/dts/qcom/ipq5018.dtsi | 34 ++++++++++++
drivers/clk/qcom/apss-ipq-pll.c | 52 ++++++++++++++++++-
3 files changed, 86 insertions(+), 1 deletion(-)
--
2.34.1
Powered by blists - more mailing lists