| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <0bcaf52c-a71e-3baa-445e-770dfe6645ef@quicinc.com>
Date: Wed, 30 Aug 2023 11:17:38 +0800
From: Tim Jiang <quic_tjiang@...cinc.com>
To: <johan@...nel.org>
CC: <marcel@...tmann.org>, <luiz.dentz@...il.com>,
<johan.hedberg@...il.com>, <linux-kernel@...r.kernel.org>,
<linux-bluetooth@...r.kernel.org>, <linux-arm-msm@...r.kernel.org>,
<quic_bgodavar@...cinc.com>, <quic_hemantg@...cinc.com>
Subject: Re: [PATCH v14 2/2] Bluetooth: hci_qca: Add support for Qualcomm
Bluetooth SoC QCA2066
Hi Johan:
could you help review this patch ? thank you for the help.
regards.
tim
On 7/27/23 16:35, Tim Jiang wrote:
> This patch adds support for QCA2066 firmware patch and NVM downloading.
> as the RF performance of QCA2066 SOC chip from different foundries may
> vary. Therefore we use different NVM to configure them based on board ID.
>
> Signed-off-by: Tim Jiang <quic_tjiang@...cinc.com>
> ---
> drivers/bluetooth/btqca.c | 76 ++++++++++++++++++++++++++++++++++++-
> drivers/bluetooth/btqca.h | 4 +-
> drivers/bluetooth/hci_qca.c | 10 +++++
> 3 files changed, 87 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
> index e7e58a956d15..fef9b83a915c 100644
> --- a/drivers/bluetooth/btqca.c
> +++ b/drivers/bluetooth/btqca.c
> @@ -205,6 +205,46 @@ static int qca_send_reset(struct hci_dev *hdev)
> return 0;
> }
>
> +static int qca_read_fw_board_id(struct hci_dev *hdev, u16 *bid)
> +{
> + u8 cmd;
> + struct sk_buff *skb;
> + struct edl_event_hdr *edl;
> + int err = 0;
> + u8 bid_len;
> +
> + cmd = EDL_GET_BID_REQ_CMD;
> + skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE, EDL_PATCH_CMD_LEN,
> + &cmd, 0, HCI_INIT_TIMEOUT);
> + if (IS_ERR(skb)) {
> + err = PTR_ERR(skb);
> + bt_dev_err(hdev, "Reading QCA board ID failed (%d)", err);
> + return err;
> + }
> +
> + edl = skb_pull_data(skb, sizeof(*edl));
> + if (!edl) {
> + bt_dev_err(hdev, "QCA read board ID with no header");
> + err = -EILSEQ;
> + goto out;
> + }
> +
> + if (edl->cresp != EDL_CMD_REQ_RES_EVT ||
> + edl->rtype != EDL_GET_BID_REQ_CMD) {
> + bt_dev_err(hdev, "QCA Wrong packet: %d %d", edl->cresp, edl->rtype);
> + err = -EIO;
> + goto out;
> + }
> +
> + bid_len = edl->data[0];
> + *bid = (edl->data[1] << 8) + edl->data[2];
> + bt_dev_dbg(hdev, "%s: bid len = %x, bid = %x", __func__, bid_len, *bid);
> +
> +out:
> + kfree_skb(skb);
> + return err;
> +}
> +
> int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
> {
> struct sk_buff *skb;
> @@ -574,6 +614,29 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
> }
> EXPORT_SYMBOL_GPL(qca_set_bdaddr_rome);
>
> +static void qca_generate_nvm_name(struct hci_dev *hdev, char *fwname,
> + size_t max_size, struct qca_btsoc_version ver, u16 bid)
> +{
> + u8 rom_ver;
> + u32 soc_ver;
> + const char *variant;
> +
> + soc_ver = get_soc_ver(ver.soc_id, ver.rom_ver);
> + rom_ver = ((soc_ver & 0x00000f00) >> 0x04) | (soc_ver & 0x0000000f);
> +
> + if ((le32_to_cpu(ver.soc_id) & 0x0000ff00) == QCA_HSP_GF_SOC_ID) /* hsp gf chip */
> + variant = "g";
> + else
> + variant = "";
> +
> + if (bid == 0x0)
> + snprintf(fwname, max_size, "qca/hpnv%02x%s.bin", rom_ver, variant);
> + else
> + snprintf(fwname, max_size, "qca/hpnv%02x%s.%x", rom_ver, variant, bid);
> +
> + bt_dev_dbg(hdev, "%s: %s", __func__, fwname);
> +}
> +
> int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> enum qca_btsoc_type soc_type, struct qca_btsoc_version ver,
> const char *firmware_name)
> @@ -582,6 +645,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> int err;
> u8 rom_ver = 0;
> u32 soc_ver;
> + u16 boardid = 0;
>
> bt_dev_dbg(hdev, "QCA setup on UART");
>
> @@ -604,6 +668,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> if (qca_is_wcn399x(soc_type)) {
> snprintf(config.fwname, sizeof(config.fwname),
> "qca/crbtfw%02x.tlv", rom_ver);
> + } else if (soc_type == QCA_QCA2066) {
> + snprintf(config.fwname, sizeof(config.fwname),
> + "qca/hpbtfw%02x.tlv", rom_ver);
> } else if (soc_type == QCA_QCA6390) {
> snprintf(config.fwname, sizeof(config.fwname),
> "qca/htbtfw%02x.tlv", rom_ver);
> @@ -631,6 +698,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> /* Give the controller some time to get ready to receive the NVM */
> msleep(10);
>
> + if (soc_type == QCA_QCA2066)
> + qca_read_fw_board_id(hdev, &boardid);
> +
> /* Download NVM configuration */
> config.type = TLV_TYPE_NVM;
> if (firmware_name)
> @@ -644,8 +714,10 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> snprintf(config.fwname, sizeof(config.fwname),
> "qca/crnv%02x.bin", rom_ver);
> }
> - }
> - else if (soc_type == QCA_QCA6390)
> + } else if (soc_type == QCA_QCA2066) {
> + qca_generate_nvm_name(hdev, config.fwname, sizeof(config.fwname),
> + ver, boardid);
> + } else if (soc_type == QCA_QCA6390)
> snprintf(config.fwname, sizeof(config.fwname),
> "qca/htnv%02x.bin", rom_ver);
> else if (soc_type == QCA_WCN6750)
> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
> index b884095bcd9d..4149e290efe6 100644
> --- a/drivers/bluetooth/btqca.h
> +++ b/drivers/bluetooth/btqca.h
> @@ -12,6 +12,7 @@
> #define EDL_PATCH_VER_REQ_CMD (0x19)
> #define EDL_PATCH_TLV_REQ_CMD (0x1E)
> #define EDL_GET_BUILD_INFO_CMD (0x20)
> +#define EDL_GET_BID_REQ_CMD (0x23)
> #define EDL_NVM_ACCESS_SET_REQ_CMD (0x01)
> #define EDL_PATCH_CONFIG_CMD (0x28)
> #define MAX_SIZE_PER_TLV_SEGMENT (243)
> @@ -47,7 +48,7 @@
> ((le32_to_cpu(soc_id) << 16) | (le16_to_cpu(rom_ver)))
>
> #define QCA_FW_BUILD_VER_LEN 255
> -
> +#define QCA_HSP_GF_SOC_ID 0x1200
>
> enum qca_baudrate {
> QCA_BAUDRATE_115200 = 0,
> @@ -148,6 +149,7 @@ enum qca_btsoc_type {
> QCA_QCA6390,
> QCA_WCN6750,
> QCA_WCN6855,
> + QCA_QCA2066,
> };
>
> #if IS_ENABLED(CONFIG_BT_QCA)
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index e11d47210e80..444643101ef2 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -1770,6 +1770,9 @@ static int qca_setup(struct hci_uart *hu)
> case QCA_ROME:
> soc_name = "ROME";
> break;
> + case QCA_QCA2066:
> + soc_name = "QCA2066";
> + break;
> case QCA_QCA6390:
> soc_name = "QCA6390";
> break;
> @@ -1931,6 +1934,11 @@ static const struct qca_device_data qca_soc_data_wcn3998 __maybe_unused = {
> .num_vregs = 4,
> };
>
> +static const struct qca_device_data qca_soc_data_qca2066 __maybe_unused = {
> + .soc_type = QCA_QCA2066,
> + .num_vregs = 0,
> +};
> +
> static const struct qca_device_data qca_soc_data_qca6390 __maybe_unused = {
> .soc_type = QCA_QCA6390,
> .num_vregs = 0,
> @@ -2418,6 +2426,7 @@ static SIMPLE_DEV_PM_OPS(qca_pm_ops, qca_suspend, qca_resume);
>
> #ifdef CONFIG_OF
> static const struct of_device_id qca_bluetooth_of_match[] = {
> + { .compatible = "qcom,qca2066-bt", .data = &qca_soc_data_qca2066},
> { .compatible = "qcom,qca6174-bt" },
> { .compatible = "qcom,qca6390-bt", .data = &qca_soc_data_qca6390},
> { .compatible = "qcom,qca9377-bt" },
> @@ -2433,6 +2442,7 @@ MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);
>
> #ifdef CONFIG_ACPI
> static const struct acpi_device_id qca_bluetooth_acpi_match[] = {
> + { "QCOM2066", (kernel_ulong_t)&qca_soc_data_qca2066 },
> { "QCOM6390", (kernel_ulong_t)&qca_soc_data_qca6390 },
> { "DLA16390", (kernel_ulong_t)&qca_soc_data_qca6390 },
> { "DLB16390", (kernel_ulong_t)&qca_soc_data_qca6390 },
Powered by blists - more mailing lists