linux-kernel - [PATCH v3 05/10] media: qcom: camss: Fix VFE-17x vfe_disable

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20230830151615.3012325-6-bryan.odonoghue@linaro.org>
Date:   Wed, 30 Aug 2023 16:16:10 +0100
From:   Bryan O'Donoghue <bryan.odonoghue@...aro.org>
To:     rfoss@...nel.org, todor.too@...il.com, bryan.odonoghue@...aro.org,
        agross@...nel.org, andersson@...nel.org, konrad.dybcio@...aro.org,
        mchehab@...nel.org, hverkuil-cisco@...all.nl,
        laurent.pinchart@...asonboard.com, sakari.ailus@...ux.intel.com,
        andrey.konovalov@...aro.org
Cc:     linux-media@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        linux-kernel@...r.kernel.org, stable@...r.kernel.org
Subject: [PATCH v3 05/10] media: qcom: camss: Fix VFE-17x vfe_disable_output()

There are two problems with the current vfe_disable_output() routine.

Firstly we rightly use a spinlock to protect output->gen2.active_num
everywhere except for in the IDLE timeout path of vfe_disable_output().
Even if that is not racy "in practice" somehow it is by happenstance not
by design.

Secondly we do not get consistent behaviour from this routine. On
sc8280xp 50% of the time I get "VFE idle timeout - resetting". In this
case the subsequent capture will succeed. The other 50% of the time, we
don't hit the idle timeout, never do the VFE reset and subsequent
captures stall indefinitely.

Rewrite the vfe_disable_output() routine to

- Quiesce write masters with vfe_wm_stop()
- Set active_num = 0

remembering to hold the spinlock when we do so followed by

- Reset the VFE

Testing on sc8280xp and sdm845 shows this to be a valid fix.

Fixes: 7319cdf189bb ("media: camss: Add support for VFE hardware version Titan 170")
Cc: stable@...r.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@...aro.org>
---
 .../media/platform/qcom/camss/camss-vfe-170.c | 22 +++----------------
 1 file changed, 3 insertions(+), 19 deletions(-)

diff --git a/drivers/media/platform/qcom/camss/camss-vfe-170.c b/drivers/media/platform/qcom/camss/camss-vfe-170.c
index 02494c89da91c..168baaa80d4e6 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe-170.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe-170.c
@@ -7,7 +7,6 @@
  * Copyright (C) 2020-2021 Linaro Ltd.
  */
 
-#include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/iopoll.h>
@@ -494,35 +493,20 @@ static int vfe_enable_output(struct vfe_line *line)
 	return 0;
 }
 
-static int vfe_disable_output(struct vfe_line *line)
+static void vfe_disable_output(struct vfe_line *line)
 {
 	struct vfe_device *vfe = to_vfe(line);
 	struct vfe_output *output = &line->output;
 	unsigned long flags;
 	unsigned int i;
-	bool done;
-	int timeout = 0;
-
-	do {
-		spin_lock_irqsave(&vfe->output_lock, flags);
-		done = !output->gen2.active_num;
-		spin_unlock_irqrestore(&vfe->output_lock, flags);
-		usleep_range(10000, 20000);
-
-		if (timeout++ == 100) {
-			dev_err(vfe->camss->dev, "VFE idle timeout - resetting\n");
-			vfe_reset(vfe);
-			output->gen2.active_num = 0;
-			return 0;
-		}
-	} while (!done);
 
 	spin_lock_irqsave(&vfe->output_lock, flags);
 	for (i = 0; i < output->wm_num; i++)
 		vfe_wm_stop(vfe, output->wm_idx[i]);
+	output->gen2.active_num = 0;
 	spin_unlock_irqrestore(&vfe->output_lock, flags);
 
-	return 0;
+	vfe_reset(vfe);
 }
 
 /*
-- 
2.41.0