[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <657fcef0-8e15-0bdd-b91c-9a172e2ad391@linaro.org>
Date: Wed, 30 Aug 2023 13:30:59 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Macpaul Lin <macpaul.lin@...iatek.com>,
Alexandre Mergnat <amergnat@...libre.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>,
Fabien Parent <fparent@...libre.com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org
Cc: Bear Wang <bear.wang@...iatek.com>,
Pablo Sun <pablo.sun@...iatek.com>,
Macpaul Lin <macpaul@...il.com>,
Chunfeng Yun <chunfeng.yun@...iatek.com>
Subject: Re: [PATCH v2 4/4] arm64: dts: mediatek: mt8195-demo: simplify mt6360
nodes
On 30/08/2023 13:15, Macpaul Lin wrote:
> The dts file for the MediaTek MT8195 demo board has been refactored
> to improve the configuration of the MT6360 multi-function PMIC.
>
> The changes include:
> - Addition of the mt6360.dtsi include file, which contains the common
> configuration of the MT6360 for all mt8195 boards.
> - Removal of the direct inclusion of the mt6360-regulator.h file.
> - Removal of the common configuration of the MT6360 PMIC since
> the included mt6360.dtsi is used.
> - Add names according to the schematic of mt8195-demo board for
> mt6360 nodes.
>
> Signed-off-by: Macpaul Lin <macpaul.lin@...iatek.com>
> ---
> arch/arm64/boot/dts/mediatek/mt8195-demo.dts | 173 ++++++++-----------
> 1 file changed, 74 insertions(+), 99 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
> index 8aea6f5d72b3..d082d679dbbe 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
> @@ -11,7 +11,6 @@
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
> -#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
>
> / {
> model = "MediaTek MT8195 demo board";
> @@ -130,103 +129,9 @@
> mt6360: pmic@34 {
> compatible = "mediatek,mt6360";
> reg = <0x34>;
> - interrupt-controller;
> + pinctrl-0 = <&mt6360_pins>;
> + pinctrl-names = "default";
> interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>;
> - interrupt-names = "IRQB";
> -
> - charger {
> - compatible = "mediatek,mt6360-chg";
> - richtek,vinovp-microvolt = <14500000>;
> -
> - otg_vbus_regulator: usb-otg-vbus-regulator {
> - regulator-compatible = "usb-otg-vbus";
> - regulator-name = "usb-otg-vbus";
> - regulator-min-microvolt = <4425000>;
> - regulator-max-microvolt = <5825000>;
> - };
> - };
> -
> - regulator {
> - compatible = "mediatek,mt6360-regulator";
> - LDO_VIN3-supply = <&mt6360_buck2>;
> -
> - mt6360_buck1: buck1 {
Your patchset does not look bisectable. Does not look tested, either...
Why having duplicated regulators (?) and then removing correct
regulators and keeping wrong ones?
> - regulator-compatible = "BUCK1";
> - regulator-name = "mt6360,buck1";
> - regulator-min-microvolt = <300000>;
> - regulator-max-microvolt = <1300000>;
> - regulator-allowed-modes = <MT6360_OPMODE_NORMAL
> - MT6360_OPMODE_LP
> - MT6360_OPMODE_ULP>;
> - regulator-always-on;
> - };
...
> };
> };
>
> @@ -259,8 +164,8 @@
> cap-sd-highspeed;
> sd-uhs-sdr50;
> sd-uhs-sdr104;
> - vmmc-supply = <&mt6360_ldo5>;
> - vqmmc-supply = <&mt6360_ldo3>;
> + vmmc-supply = <&mt6360_vmch_pmu_ldo5_reg>;
> + vqmmc-supply = <&mt6360_vmc_pmu_ldo3_reg>;
> status = "okay";
> };
>
> @@ -300,6 +205,67 @@
> regulator-always-on;
> };
>
> +#include "mt6360.dtsi"
Includes are in the top part of the DTS. Sometimes bottom, but never in
the middle.
Best regards,
Krzysztof
Powered by blists - more mailing lists