lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAA8EJprLwi3QKgTksTeSWkjmhFL69PO8Zmc=j3VMfAr_UpXJ=g@mail.gmail.com>
Date:   Wed, 30 Aug 2023 23:15:06 +0300
From:   Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To:     Nitheesh Sekar <quic_nsekar@...cinc.com>
Cc:     agross@...nel.org, andersson@...nel.org, konrad.dybcio@...aro.org,
        vkoul@...nel.org, kishon@...nel.org, robh+dt@...nel.org,
        krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org,
        gregkh@...uxfoundation.org, quic_srichara@...cinc.com,
        quic_varada@...cinc.com, quic_wcheng@...cinc.com,
        linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-usb@...r.kernel.org,
        Amandeep Singh <quic_amansing@...cinc.com>
Subject: Re: [PATCH 4/5] arm64: dts: qcom: ipq5018: Add USB related nodes

On Fri, 25 Aug 2023 at 12:37, Nitheesh Sekar <quic_nsekar@...cinc.com> wrote:
>
> Add USB phy and controller nodes.
>
> Co-developed-by: Amandeep Singh <quic_amansing@...cinc.com>
> Signed-off-by: Amandeep Singh <quic_amansing@...cinc.com>
> Signed-off-by: Nitheesh Sekar <quic_nsekar@...cinc.com>
> ---
>  arch/arm64/boot/dts/qcom/ipq5018.dtsi | 54 +++++++++++++++++++++++++++
>  1 file changed, 54 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> index 9f13d2dcdfd5..ff477923a823 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> @@ -238,6 +238,60 @@
>                                 status = "disabled";
>                         };
>                 };
> +
> +               usbphy0: phy@...00 {
> +                       compatible = "qcom,ipq5018-usb-hsphy";
> +                       reg = <0x0005b000 0x120>;
> +
> +                       clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>;
> +
> +                       resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
> +
> +                       #phy-cells = <0>;
> +
> +                       status = "disabled";
> +               };
> +
> +               usb: usb2@...0000 {
> +                       compatible = "qcom,ipq5018-dwc3", "qcom,dwc3";
> +                       reg = <0x08af8800 0x400>;
> +
> +                       interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
> +                       interrupt-names = "hs_phy_irq";
> +
> +                       clocks = <&gcc GCC_USB0_MASTER_CLK>,
> +                                <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
> +                                <&gcc GCC_USB0_SLEEP_CLK>,
> +                                <&gcc GCC_USB0_MOCK_UTMI_CLK>;
> +                       clock-names = "core",
> +                                     "iface",
> +                                     "sleep",
> +                                     "mock_utmi";
> +
> +                       resets = <&gcc GCC_USB0_BCR>;
> +
> +                       qcom,select-utmi-as-pipe-clk;
> +                       #address-cells = <1>;
> +                       #size-cells = <1>;
> +                       ranges;
> +
> +                       status = "disabled";
> +
> +                       usb2_0_dwc: usb@...0000 {

Could you please remove the `2_0' part of the label?

> +                               compatible = "snps,dwc3";
> +                               reg = <0x08a00000 0xe000>;
> +                               clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
> +                               clock-names = "ref";
> +                               interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
> +                               phy-names = "usb2-phy";
> +                               phys = <&usbphy0>;
> +                               tx-fifo-resize;
> +                               snps,is-utmi-l1-suspend;
> +                               snps,hird-threshold = /bits/ 8 <0x0>;
> +                               snps,dis_u2_susphy_quirk;
> +                               snps,dis_u3_susphy_quirk;
> +                       };
> +               };
>         };
>
>         timer {
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>


-- 
With best wishes
Dmitry

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ