lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230831135415.1dfd8c5c@wsk>
Date:   Thu, 31 Aug 2023 13:54:15 +0200
From:   Lukasz Majewski <lukma@...x.de>
To:     Paolo Abeni <pabeni@...hat.com>
Cc:     Eric Dumazet <edumazet@...gle.com>, Andrew Lunn <andrew@...n.ch>,
        davem@...emloft.net, Woojung Huh <woojung.huh@...rochip.com>,
        Vladimir Oltean <olteanv@...il.com>, Tristram.Ha@...rochip.com,
        Florian Fainelli <f.fainelli@...il.com>,
        Jakub Kicinski <kuba@...nel.org>, UNGLinuxDriver@...rochip.com,
        George McCollister <george.mccollister@...il.com>,
        Oleksij Rempel <o.rempel@...gutronix.de>,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 0/4] net: dsa: hsr: Enable HSR HW offloading for
 KSZ9477

Hi Paolo,

> On Thu, 2023-08-31 at 13:18 +0200, Lukasz Majewski wrote:
> > This patch series provides support for HSR HW offloading in KSZ9477
> > switch IC.
> > 
> > To test this feature:
> > ip link add name hsr0 type hsr slave1 lan1 slave2 lan2 supervision
> > 45 version 1 ifconfig lan1 up;ifconfig lan2 up
> > ifconfig hsr0 192.168.0.1 up
> > 
> > To remove HSR network device:
> > ip link del hsr0
> > 
> > Test HW:
> > Two KSZ9477-EVB boards with HSR ports set to "Port1" and "Port2".
> > 
> > Performance SW used:
> > nuttcp -S --nofork
> > nuttcp -vv -T 60 -r 192.168.0.2
> > nuttcp -vv -T 60 -t 192.168.0.2
> > 
> > Code: v6.5-rc7 Linux repository
> > Tested HSR v0 and v1
> > Results:
> > With KSZ9477 offloading support added: RX: 100 Mbps TX: 98 Mbps
> > With no offloading 		       RX: 63 Mbps  TX: 63 Mbps
> > 
> > 
> > Lukasz Majewski (4):
> >   net: dsa: Extend the ksz_device structure to hold info about HSR
> > ports net: dsa: Extend ksz9477 TAG setup to support HSR frames
> > duplication net: dsa: hsr: Enable in KSZ9477 switch HW HSR
> > offloading net: dsa: hsr: Provide generic HSR ksz_hsr_{join|leave}
> > functions
> > 
> >  drivers/net/dsa/microchip/ksz9477.c    | 96
> > ++++++++++++++++++++++++++ drivers/net/dsa/microchip/ksz9477.h    |
> >  4 ++ drivers/net/dsa/microchip/ksz_common.c | 81
> > ++++++++++++++++++++++ drivers/net/dsa/microchip/ksz_common.h |  3 +
> >  include/linux/dsa/ksz_common.h         |  1 +
> >  net/dsa/tag_ksz.c                      |  5 ++
> >  6 files changed, 190 insertions(+)
> >   
> I'm sorry, it looks like I was not clear previously.
> ---
> ## Form letter - net-next-closed
> 
> The merge window for v6.6 has begun and therefore net-next is closed
> for new drivers, features, code refactoring and optimizations.
> We are currently accepting bug fixes only.
> 
> Please repost when net-next reopens after Sept 11th.
> 

This is in fact the RFC kind of patch, as you were the only one who
replied with feedback on it.

If possible - I would like to gain as much feedback as possible until
11.09, so this patch set could be applied then.

> RFC patches sent for review only are obviously welcome at any time.
> 

Shall I send RFC again? Or is the above explanation enough to proceed
with review?

> See:
> https://www.kernel.org/doc/html/next/process/maintainer-netdev.html#development-cycle

Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@...x.de

Content of type "application/pgp-signature" skipped

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ