| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <f8a6bdee-4abb-b69d-874e-c0a13e2ac4a9@intel.com>
Date: Thu, 31 Aug 2023 16:02:16 +0300
From: Adrian Hunter <adrian.hunter@...el.com>
To: Sven van Ashbrook <svenva@...omium.org>,
LKML <linux-kernel@...r.kernel.org>, ulf.hansson@...aro.org
Cc: jason.lai@...esyslogic.com.tw, skardach@...gle.com,
Renius Chen <reniuschengl@...il.com>,
linux-mmc@...r.kernel.org, greg.tu@...esyslogic.com.tw,
jasonlai.genesyslogic@...il.com, SeanHY.chen@...esyslogic.com.tw,
ben.chuang@...esyslogic.com.tw, victor.shih@...esyslogic.com.tw,
stable@...r.kernel.org
Subject: Re: [PATCH v2] mmc: sdhci-pci-gli: fix LPM negotiation so x86/S0ix
SoCs can suspend
On 24/08/23 14:46, Adrian Hunter wrote:
> Hi
>
> Looks OK - a few minor comments below
>
> On 23/08/23 20:41, Sven van Ashbrook wrote:
>> To improve the r/w performance of GL9763E, the current driver inhibits LPM
>> negotiation while the device is active.
>>
>> This prevents a large number of SoCs from suspending, notably x86 systems
>
> If possible, can you give example of which SoCs / products
>
>> which use S0ix as the suspend mechanism:
>> 1. Userspace initiates s2idle suspend (e.g. via writing to
>> /sys/power/state)
>> 2. This switches the runtime_pm device state to active, which disables
>> LPM negotiation, then calls the "regular" suspend callback
>> 3. With LPM negotiation disabled, the bus cannot enter low-power state
>> 4. On a large number of SoCs, if the bus not in a low-power state, S0ix
>> cannot be entered, which in turn prevents the SoC from entering
>> suspend.
>>
>> Fix by re-enabling LPM negotiation in the device's suspend callback.
>>
>> Suggested-by: Stanislaw Kardach <skardach@...gle.com>
>> Fixes: f9e5b33934ce ("mmc: host: Improve I/O read/write performance for GL9763E")
>> Cc: stable@...r.kernel.org
>> Signed-off-by: Sven van Ashbrook <svenva@...omium.org>
>> # on gladios device
>> # on 15590.0.0 with v5.10 and upstream (v6.4) kernels
>>
>
> 3 extraneous lines here - please remove
>
>> ---
>>
>> Changes in v2:
>> - improved symmetry and error path in s2idle suspend callback (internal review)
>>
>> drivers/mmc/host/sdhci-pci-gli.c | 102 +++++++++++++++++++------------
>> 1 file changed, 64 insertions(+), 38 deletions(-)
>>
>> diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
>> index 1792665c9494a..19f577cc8bceb 100644
>> --- a/drivers/mmc/host/sdhci-pci-gli.c
>> +++ b/drivers/mmc/host/sdhci-pci-gli.c
>> @@ -745,42 +745,6 @@ static u32 sdhci_gl9750_readl(struct sdhci_host *host, int reg)
>> return value;
>> }
>>
>> -#ifdef CONFIG_PM_SLEEP
>> -static int sdhci_pci_gli_resume(struct sdhci_pci_chip *chip)
>> -{
>> - struct sdhci_pci_slot *slot = chip->slots[0];
>> -
>> - pci_free_irq_vectors(slot->chip->pdev);
>> - gli_pcie_enable_msi(slot);
>> -
>> - return sdhci_pci_resume_host(chip);
>> -}
>> -
>> -static int sdhci_cqhci_gli_resume(struct sdhci_pci_chip *chip)
>> -{
>> - struct sdhci_pci_slot *slot = chip->slots[0];
>> - int ret;
>> -
>> - ret = sdhci_pci_gli_resume(chip);
>> - if (ret)
>> - return ret;
>> -
>> - return cqhci_resume(slot->host->mmc);
>> -}
>> -
>> -static int sdhci_cqhci_gli_suspend(struct sdhci_pci_chip *chip)
>> -{
>> - struct sdhci_pci_slot *slot = chip->slots[0];
>> - int ret;
>> -
>> - ret = cqhci_suspend(slot->host->mmc);
>> - if (ret)
>> - return ret;
>> -
>> - return sdhci_suspend_host(slot->host);
>> -}
>> -#endif
>> -
>> static void gl9763e_hs400_enhanced_strobe(struct mmc_host *mmc,
>> struct mmc_ios *ios)
>> {
>> @@ -1029,6 +993,68 @@ static int gl9763e_runtime_resume(struct sdhci_pci_chip *chip)
>> }
>> #endif
>>
>> +#ifdef CONFIG_PM_SLEEP
>> +static int sdhci_pci_gli_resume(struct sdhci_pci_chip *chip)
>> +{
>> + struct sdhci_pci_slot *slot = chip->slots[0];
>> +
>> + pci_free_irq_vectors(slot->chip->pdev);
>> + gli_pcie_enable_msi(slot);
>> +
>> + return sdhci_pci_resume_host(chip);
>> +}
>> +
>> +static int gl9763e_resume(struct sdhci_pci_chip *chip)
>> +{
>> + struct sdhci_pci_slot *slot = chip->slots[0];
>> + int ret;
>> +
>> + ret = sdhci_pci_gli_resume(chip);
>> + if (ret)
>> + return ret;
>> +
>> + ret = cqhci_resume(slot->host->mmc);
>> + if (ret)
>> + return ret;
>> +
>> + /* Disable LPM negotiation to bring device back in sync
>> + * with its runtime_pm state.
>> + */
>
> I would prefer the comment style:
>
> /*
> * Blah, blah ...
> * Blah, blah, blah.
> */
>
>> + gl9763e_set_low_power_negotiation(slot, false);
>> +
>> + return 0;
>> +}
>> +
>> +static int gl9763e_suspend(struct sdhci_pci_chip *chip)
>> +{
>> + struct sdhci_pci_slot *slot = chip->slots[0];
>> + int ret;
>> +
>> + /* Certain SoCs can suspend only with the bus in low-
>
> Ditto re comment style
>
>> + * power state, notably x86 SoCs when using S0ix.
>> + * Re-enable LPM negotiation to allow entering L1 state
>> + * and entering system suspend.
>> + */
>> + gl9763e_set_low_power_negotiation(slot, true);
>
> Couldn't this be at the end of the function, save
> an error path
I think the discussion was a little uncertain over
moving this, so maybe leave it alone.
However please consider my other comments.
>
>> +
>> + ret = cqhci_suspend(slot->host->mmc);
>> + if (ret)
>> + goto err_suspend;
>> +
>> + ret = sdhci_suspend_host(slot->host);
>> + if (ret)
>> + goto err_suspend_host;
>> +
>> + return 0;
>> +
>> +err_suspend_host:
>> + cqhci_resume(slot->host->mmc);
>> +err_suspend:
>> + gl9763e_set_low_power_negotiation(slot, false);
>> + return ret;
>> +}
>> +#endif
>> +
>> static int gli_probe_slot_gl9763e(struct sdhci_pci_slot *slot)
>> {
>> struct pci_dev *pdev = slot->chip->pdev;
>> @@ -1113,8 +1139,8 @@ const struct sdhci_pci_fixes sdhci_gl9763e = {
>> .probe_slot = gli_probe_slot_gl9763e,
>> .ops = &sdhci_gl9763e_ops,
>> #ifdef CONFIG_PM_SLEEP
>> - .resume = sdhci_cqhci_gli_resume,
>> - .suspend = sdhci_cqhci_gli_suspend,
>> + .resume = gl9763e_resume,
>> + .suspend = gl9763e_suspend,
>> #endif
>> #ifdef CONFIG_PM
>> .runtime_suspend = gl9763e_runtime_suspend,
>
Powered by blists - more mailing lists