linux-kernel - [RFC PATCH v2 03/19] scsi: scsi_error: Check if to do reset in scsi_try_xxx

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20230901094127.2010873-4-haowenchao2@huawei.com>
Date:   Fri, 1 Sep 2023 17:41:11 +0800
From:   Wenchao Hao <haowenchao2@...wei.com>
To:     "James E . J . Bottomley" <jejb@...ux.ibm.com>,
        "Martin K . Petersen" <martin.petersen@...cle.com>,
        <linux-scsi@...r.kernel.org>
CC:     Hannes Reinecke <hare@...e.de>, <linux-kernel@...r.kernel.org>,
        <louhongxiang@...wei.com>, <lixiaokeng@...wei.com>,
        Wenchao Hao <haowenchao2@...wei.com>
Subject: [RFC PATCH v2 03/19] scsi: scsi_error: Check if to do reset in scsi_try_xxx_reset

This is preparation for a genernal LUN/target based error handle
strategy, the strategy would reuse some error handler APIs,
but some steps of these function should not be performed. For
example, we should not perform target reset if we just stop IOs
on one single LUN.

This change add checks in scsi_try_xxx_reset to make sure
the reset operations would not be performed only if the condition
is not satisfied.

Signed-off-by: Wenchao Hao <haowenchao2@...wei.com>
---
 drivers/scsi/scsi_error.c | 37 +++++++++++++++++++++++++++++++------
 1 file changed, 31 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 879fdd7c165b..48ed035d44ce 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -923,7 +923,7 @@ void scsi_eh_done(struct scsi_cmnd *scmd)
  * scsi_try_host_reset - ask host adapter to reset itself
  * @scmd:	SCSI cmd to send host reset.
  */
-static enum scsi_disposition scsi_try_host_reset(struct scsi_cmnd *scmd)
+static enum scsi_disposition __scsi_try_host_reset(struct scsi_cmnd *scmd)
 {
 	unsigned long flags;
 	enum scsi_disposition rtn;
@@ -949,11 +949,19 @@ static enum scsi_disposition scsi_try_host_reset(struct scsi_cmnd *scmd)
 	return rtn;
 }
 
+static enum scsi_disposition scsi_try_host_reset(struct scsi_cmnd *scmd)
+{
+	if (!scsi_host_in_recovery(scmd->device->host))
+		return FAILED;
+
+	return __scsi_try_host_reset(scmd);
+}
+
 /**
  * scsi_try_bus_reset - ask host to perform a bus reset
  * @scmd:	SCSI cmd to send bus reset.
  */
-static enum scsi_disposition scsi_try_bus_reset(struct scsi_cmnd *scmd)
+static enum scsi_disposition __scsi_try_bus_reset(struct scsi_cmnd *scmd)
 {
 	unsigned long flags;
 	enum scsi_disposition rtn;
@@ -979,6 +987,14 @@ static enum scsi_disposition scsi_try_bus_reset(struct scsi_cmnd *scmd)
 	return rtn;
 }
 
+static enum scsi_disposition scsi_try_bus_reset(struct scsi_cmnd *scmd)
+{
+	if (!scsi_host_in_recovery(scmd->device->host))
+		return FAILED;
+
+	return __scsi_try_bus_reset(scmd);
+}
+
 static void __scsi_report_device_reset(struct scsi_device *sdev, void *data)
 {
 	sdev->was_reset = 1;
@@ -995,7 +1011,7 @@ static void __scsi_report_device_reset(struct scsi_device *sdev, void *data)
  *    timer on it, and set the host back to a consistent state prior to
  *    returning.
  */
-static enum scsi_disposition scsi_try_target_reset(struct scsi_cmnd *scmd)
+static enum scsi_disposition __scsi_try_target_reset(struct scsi_cmnd *scmd)
 {
 	unsigned long flags;
 	enum scsi_disposition rtn;
@@ -1016,6 +1032,15 @@ static enum scsi_disposition scsi_try_target_reset(struct scsi_cmnd *scmd)
 	return rtn;
 }
 
+static enum scsi_disposition scsi_try_target_reset(struct scsi_cmnd *scmd)
+{
+	if (!(scsi_target_in_recovery(scsi_target(scmd->device)) ||
+	      scsi_host_in_recovery(scmd->device->host)))
+		return FAILED;
+
+	return __scsi_try_target_reset(scmd);
+}
+
 /**
  * scsi_try_bus_device_reset - Ask host to perform a BDR on a dev
  * @scmd:	SCSI cmd used to send BDR
@@ -2534,17 +2559,17 @@ scsi_ioctl_reset(struct scsi_device *dev, int __user *arg)
 			break;
 		fallthrough;
 	case SG_SCSI_RESET_TARGET:
-		rtn = scsi_try_target_reset(scmd);
+		rtn = __scsi_try_target_reset(scmd);
 		if (rtn == SUCCESS || (val & SG_SCSI_RESET_NO_ESCALATE))
 			break;
 		fallthrough;
 	case SG_SCSI_RESET_BUS:
-		rtn = scsi_try_bus_reset(scmd);
+		rtn = __scsi_try_bus_reset(scmd);
 		if (rtn == SUCCESS || (val & SG_SCSI_RESET_NO_ESCALATE))
 			break;
 		fallthrough;
 	case SG_SCSI_RESET_HOST:
-		rtn = scsi_try_host_reset(scmd);
+		rtn = __scsi_try_host_reset(scmd);
 		if (rtn == SUCCESS)
 			break;
 		fallthrough;
-- 
2.35.3