[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <SG2PR06MB336524E341C2B621D09C7BA98BE4A@SG2PR06MB3365.apcprd06.prod.outlook.com>
Date: Fri, 1 Sep 2023 05:10:19 +0000
From: Billy Tsai <billy_tsai@...eedtech.com>
To: Potin Lai <potin.lai.pt@...il.com>
CC: "jdelvare@...e.com" <jdelvare@...e.com>,
"linux@...ck-us.net" <linux@...ck-us.net>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"krzysztof.kozlowski+dt@...aro.org"
<krzysztof.kozlowski+dt@...aro.org>,
"joel@....id.au" <joel@....id.au>,
"andrew@...id.au" <andrew@...id.au>,
"corbet@....net" <corbet@....net>,
"thierry.reding@...il.com" <thierry.reding@...il.com>,
"u.kleine-koenig@...gutronix.de" <u.kleine-koenig@...gutronix.de>,
"p.zabel@...gutronix.de" <p.zabel@...gutronix.de>,
"naresh.solanki@...ements.com" <naresh.solanki@...ements.com>,
"linux-hwmon@...r.kernel.org" <linux-hwmon@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-aspeed@...ts.ozlabs.org" <linux-aspeed@...ts.ozlabs.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-doc@...r.kernel.org" <linux-doc@...r.kernel.org>,
"linux-pwm@...r.kernel.org" <linux-pwm@...r.kernel.org>,
BMC-SW <BMC-SW@...eedtech.com>,
"patrick@...cx.xyz" <patrick@...cx.xyz>
Subject: Re: [PATCH v8 3/3] hwmon: (aspeed-g6-pwm-tacho): Support for ASPEED
g6 PWM/Fan tach
On 8/30/23 20:32, Billy Tsai wrote:
>> +static int aspeed_tach_hwmon_write(struct device *dev,
>> + enum hwmon_sensor_types type, u32 attr,
>> + int channel, long val)
>> +{
>> + struct aspeed_pwm_tach_data *priv = dev_get_drvdata(dev);
>> + u32 reg_val;
>> +
>> + switch (attr) {
>> + case hwmon_fan_div:
>> + if (!is_power_of_2(val) || (ilog2(val) % 2) ||
>> + DIV_TO_REG(val) > 0xb)
>> + return -EINVAL;
>> + priv->tach_divisor = val;
>> + reg_val = readl(priv->base + TACH_ASPEED_CTRL(channel));
>> + reg_val &= ~TACH_ASPEED_CLK_DIV_T_MASK;
>> + reg_val |= FIELD_GET(TACH_ASPEED_CLK_DIV_T_MASK,
>> + DIV_TO_REG(priv->tach_divisor));
> Hi Billy,
> I notice the fanX_div is always shows 1 after I set 1024.
> I think FIELD_GET() needs to replaced with FIELD_PREP().
>> + writel(reg_val, priv->base + TACH_ASPEED_CTRL(channel));
>> + break;
>> + default:
>> + return -EOPNOTSUPP;
>> + }
>> +
>> + return 0;
>> +}
>> +static void aspeed_present_fan_tach(struct aspeed_pwm_tach_data *priv, u32 tach_ch)
>> +{
>> + u32 val;
>> +
>> + priv->tach_present[tach_ch] = true;
>> + priv->tach_divisor = DEFAULT_TACH_DIV;
>> +
>> + val = readl(priv->base + TACH_ASPEED_CTRL(tach_ch));
>> + val &= ~(TACH_ASPEED_INVERS_LIMIT | TACH_ASPEED_DEBOUNCE_MASK |
>> + TACH_ASPEED_IO_EDGE_MASK | TACH_ASPEED_CLK_DIV_T_MASK |
>> + TACH_ASPEED_THRESHOLD_MASK);
>> + val |= (DEBOUNCE_3_CLK << TACH_ASPEED_DEBOUNCE_BIT) | F2F_EDGES |
>> + FIELD_GET(TACH_ASPEED_CLK_DIV_T_MASK,
>> + DIV_TO_REG(priv->tach_divisor));
> And here as well.
>> + writel(val, priv->base + TACH_ASPEED_CTRL(tach_ch));
>> +
>> + aspeed_tach_ch_enable(priv, tach_ch, true);
>> +}
>> +
>>
Hi Potin,
I will fix it in next verison of the patch.
Thanks for reviewing.
Powered by blists - more mailing lists