linux-kernel - Re: [PATCH] drivers:i2c:add controller reset when the timeout occurred

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20230903141519.ha6aakgkrq6ohy5s@zenone.zhora.eu>
Date:   Sun, 3 Sep 2023 16:15:19 +0200
From:   Andi Shyti <andi.shyti@...nel.org>
To:     Tommy Huang <tommy_huang@...eedtech.com>
Cc:     brendan.higgins@...ux.dev, p.zabel@...gutronix.de,
        linux-i2c@...r.kernel.org, openbmc@...ts.ozlabs.org,
        benh@...nel.crashing.org, joel@....id.au, andrew@...id.au,
        linux-arm-kernel@...ts.infradead.org,
        linux-aspeed@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
        BMC-SW@...eedtech.com, Jae Hyun Yoo <jae.hyun.yoo@...ux.intel.com>
Subject: Re: [PATCH] drivers:i2c:add controller reset when the timeout
 occurred

Hi Tommy,

Please fix the title of the patch from:

   drivers:i2c:add controller reset when the timeout occurred

to something like:

   i2c: aspeed: Reset the controller when timeout occurs

Note:

 - leave a space after the ':'
 - start with a capital letter after the last ':'

On Mon, Aug 14, 2023 at 07:15:34PM +0800, Tommy Huang wrote:
> 1.Call i2c controller reset when the i2c transfer timeout occurred.
> The rest of interrupts and device should be reset avoid unperdicted
> controller behavior occurred.

Please remove the '1.' and please rewrite this sentence in order
to be grammatically correct, something like:

"Call the i2c controller reset when an i2c transfer timeout
occurs. The remaining interrupts and the device should be reset
to avoid unpredictable controller behavior."

> Signed-off-by: Tommy Huang <tommy_huang@...eedtech.com>

Is this a fix? If so please add:

Fixes: 2e57b7cebb98 ("i2c: aspeed: Add multi-master use case support")
Cc: Jae Hyun Yoo <jae.hyun.yoo@...ux.intel.com>
Cc: <stable@...r.kernel.org> # v5.1+

Jae Hyun is the author of the line you are changing therefore he
needs to be Cc'ed

[...]

>  		/*
>  		 * If timed out and bus is still busy in a multi master
> -		 * environment, attempt recovery at here.
> +		 * environment, attempt recovery at here. Even the bus is
> +		 * idle, we still need reset i2c controller avoid rest of
> +		 * interrupts.

Please fix the grammar here, as well

   In a multi-master setup, if a timeout occurs, attempt
   recovery.  But if the bus is idle, we still need to reset the
   i2c controller to clear the remaining interrupts.

We take this chance to improve the previous comment, as well.

>  		 */
>  		if (bus->multi_master &&
>  		    (readl(bus->base + ASPEED_I2C_CMD_REG) &
>  		     ASPEED_I2CD_BUS_BUSY_STS))
>  			aspeed_i2c_recover_bus(bus);
> +		else
> +			aspeed_i2c_reset(bus);

I'd like also someone from Jae Hyun, Brendan, Benjamin or Joel to
take a look here, as well. Thanks!

Andi