[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAJZ5v0i5XLwN8vpR+MdECHVusMBowtWfDb-fQZDjip+hcoagMA@mail.gmail.com>
Date: Mon, 4 Sep 2023 19:17:40 +0200
From: "Rafael J. Wysocki" <rafael@...nel.org>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: Linux PM <linux-pm@...r.kernel.org>,
ACPI Devel Maling List <linux-acpi@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Daniel Lezcano <daniel.lezcano@...aro.org>
Subject: [GIT PULL] More thermal control updates for v6.6-rc1
Hi Linus,
Please pull from the tag
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git \
thermal-6.6-rc1-2
with top-most commit 8289d810ea85755a9d22f75785806cb34eecd5e5
thermal: core: Rework .get_trend() thermal zone callback
on top of commit 36534782b584389afd281f326421a35dcecde1ec
Merge tag 'thermal-6.6-rc1' of
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
to receive more thermal control updates for 6.6-rc1.
These are mostly updates of thermal control drivers for ARM platforms,
new thermal control support for Loongson-2 and a couple of core cleanups
made possible by recent changes merged previously.
Specifics:
- Check if the Tegra BPMP supports the trip points in order to set the
.set_trips callback (Mikko Perttunen).
- Add new Loongson-2 thermal sensor along with the DT bindings (Yinbo
Zhu).
- Use IS_ERR_OR_NULL() helper to replace a double test on the TI
bandgap sensor (Li Zetao).
- Remove redundant platform_set_drvdata() calls, as there are no
corresponding calls to platform_get_drvdata(), from a bunch of
drivers (Andrei Coardos).
- Switch the Mediatek LVTS mode to filtered in order to enable
interrupts (Nícolas F. R. A. Prado).
- Fix Wvoid-pointer-to-enum-cast warning on the Exynos TMU (Krzysztof
Kozlowski).
- Remove redundant dev_err_probe(), because the underlying function
already called it, from the Mediatek sensor (Chen Jiahao).
- Free calibration nvmem after reading it on sun8i (Mark Brown).
- Remove useless comment from the sun8i driver (Yangtao Li).
- Make tsens_xxxx_nvmem static to fix a sparse warning on QCom
tsens (Min-Hua Chen).
- Remove error message at probe deferral on imx8mm (Ahmad Fatoum).
- Fix parameter check in lvts_debugfs_init() with IS_ERR() on
Mediatek LVTS (Minjie Du).
- Fix interrupt routine and configuration for Mediatek LVTS (Nícolas
F. R. A. Prado).
- Drop unused .get_trip_type(), .get_trip_temp() and .get_trip_hyst()
thermal zone callbacks from the core and rework the .get_trend()
one to take a trip point pointer as an argument (Rafael Wysocki).
Thanks!
---------------
Ahmad Fatoum (1):
thermal/drivers/imx8mm: Suppress log message on probe deferral
Andrei Coardos (8):
thermal/drivers/broadcom/sr-thermal: Removed call to
platform_set_drvdata()
thermal/drivers/k3_j72xx_bandgap: Removed unneeded call to
platform_set_drvdata()
thermal/drivers/k3_bandgap: Remove unneeded call to platform_set_drvdata()
thermal/drivers/broadcom/brcstb_thermal: Removed unneeded
platform_set_drvdata()
thermal/drivers/sun8i_thermal: Remove unneeded call to
platform_set_drvdata()
thermal/drivers/mediatek/auxadc_thermal: Removed call to
platform_set_drvdata()
thermal/drivers/max77620_thermal: Removed unneeded call to
platform_set_drvdata()
thermal/drivers/generic-adc: Removed unneeded call to
platform_set_drvdata()
Chen Jiahao (1):
thermal/drivers/mediatek: Clean up redundant dev_err_probe()
Krzysztof Kozlowski (1):
thermal/drivers/samsung: Fix Wvoid-pointer-to-enum-cast warning
Li Zetao (1):
thermal/drivers/ti-soc-thermal: Use helper function IS_ERR_OR_NULL()
Mark Brown (1):
thermal/drivers/sun8i: Free calibration nvmem after reading it
Mikko Perttunen (1):
thermal/drivers/tegra-bpmp: Check if BPMP supports trip points
Min-Hua Chen (1):
thermal/drivers/tsens: Make tsens_xxxx_nvmem static
Minjie Du (1):
thermal/drivers/mediatek/lvts: Fix parameter check in lvts_debugfs_init()
Nícolas F. R. A. Prado (7):
thermal/drivers/mediatek/lvts_thermal: Handle IRQ on all controllers
thermal/drivers/mediatek/lvts_thermal: Honor sensors in immediate mode
thermal/drivers/mediatek/lvts_thermal: Use offset threshold for IRQ
thermal/drivers/mediatek/lvts_thermal: Disable undesired interrupts
thermal/drivers/mediatek/lvts_thermal: Don't leave threshold zeroed
thermal/drivers/mediatek/lvts_thermal: Manage threshold between sensors
thermal/drivers/mediatek/lvts_thermal: Make readings valid in
filtered mode
Rafael J. Wysocki (2):
thermal: core: Drop unused .get_trip_*() callbacks
thermal: core: Rework .get_trend() thermal zone callback
Ruan Jinjie (1):
thermal/drivers/db8500: Remove redundant of_match_ptr()
Yangtao Li (1):
thermal/drivers/sun8i: Remove unneeded comments
Yinbo Zhu (2):
thermal/drivers/loongson-2: Add thermal management support
thermal: dt-bindings: add loongson-2 thermal
---------------
.../bindings/thermal/loongson,ls2k-thermal.yaml | 44 ++++++
MAINTAINERS | 8 +
drivers/acpi/thermal.c | 41 +++--
drivers/thermal/Kconfig | 12 ++
drivers/thermal/Makefile | 1 +
drivers/thermal/broadcom/brcmstb_thermal.c | 1 -
drivers/thermal/broadcom/sr-thermal.c | 1 -
drivers/thermal/db8500_thermal.c | 2 +-
drivers/thermal/imx8mm_thermal.c | 6 +-
drivers/thermal/k3_bandgap.c | 1 -
drivers/thermal/k3_j72xx_bandgap.c | 2 -
drivers/thermal/loongson2_thermal.c | 169 ++++++++++++++++++++
drivers/thermal/max77620_thermal.c | 2 -
drivers/thermal/mediatek/auxadc_thermal.c | 2 -
drivers/thermal/mediatek/lvts_thermal.c | 175 +++++++++++++++------
drivers/thermal/qcom/tsens-v0_1.c | 6 +-
drivers/thermal/qcom/tsens-v1.c | 2 +-
drivers/thermal/samsung/exynos_tmu.c | 2 +-
drivers/thermal/sun8i_thermal.c | 8 +-
drivers/thermal/tegra/tegra-bpmp-thermal.c | 52 +++++-
drivers/thermal/thermal-generic-adc.c | 1 -
drivers/thermal/thermal_core.c | 2 +-
drivers/thermal/thermal_core.h | 2 +-
drivers/thermal/thermal_helpers.c | 3 +-
drivers/thermal/thermal_trip.c | 24 +--
drivers/thermal/ti-soc-thermal/ti-bandgap.c | 2 +-
drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 3 +-
include/linux/thermal.h | 34 ++--
28 files changed, 468 insertions(+), 140 deletions(-)
Powered by blists - more mailing lists