linux-kernel - Re: [PATCH] riscv: dts: thead: set dma-noncoherent to soc bus

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <ZPYvsvCYWibrKXOz@x1>
Date:   Mon, 4 Sep 2023 12:27:46 -0700
From:   Drew Fustini <dfustini@...libre.com>
To:     Xi Ruoyao <xry111@...111.site>
Cc:     Jisheng Zhang <jszhang@...nel.org>, Guo Ren <guoren@...nel.org>,
        Fu Wei <wefu@...hat.com>, Conor Dooley <conor@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Paul Walmsley <paul.walmsley@...ive.com>,
        Palmer Dabbelt <palmer@...belt.com>,
        Albert Ou <aou@...s.berkeley.edu>,
        linux-riscv@...ts.infradead.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH] riscv: dts: thead: set dma-noncoherent to soc bus

On Mon, Sep 04, 2023 at 10:52:39AM -0700, Drew Fustini wrote:
> On Tue, Sep 05, 2023 at 12:28:41AM +0800, Xi Ruoyao wrote:
> > On Mon, 2023-09-04 at 22:45 +0800, Jisheng Zhang wrote:
> > > On Sun, Sep 03, 2023 at 04:32:21PM -0700, Drew Fustini wrote:
> > > > On Sun, Aug 20, 2023 at 07:53:53PM +0800, Jisheng Zhang wrote:
> > > > > riscv select ARCH_DMA_DEFAULT_COHERENT by default, and th1520 isn't
> > > > > dma coherent, so set dma-noncoherent to reflect this fact.
> > > > > 
> > > > > Signed-off-by: Jisheng Zhang <jszhang@...nel.org>
> > > > > ---
> > > > >  arch/riscv/boot/dts/thead/th1520.dtsi | 1 +
> > > > >  1 file changed, 1 insertion(+)
> > > > > 
> > > > > diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
> > > > > index 56a73134b49e..58108f0eb3fd 100644
> > > > > --- a/arch/riscv/boot/dts/thead/th1520.dtsi
> > > > > +++ b/arch/riscv/boot/dts/thead/th1520.dtsi
> > > > > @@ -139,6 +139,7 @@ soc {
> > > > >                 interrupt-parent = <&plic>;
> > > > >                 #address-cells = <2>;
> > > > >                 #size-cells = <2>;
> > > > > +               dma-noncoherent;
> > > > >                 ranges;
> > > > >  
> > > > >                 plic: interrupt-controller@...8000000 {
> > > > > -- 
> > > > > 2.40.1
> > > > > 
> > > > 
> > > > Tested-by: Drew Fustini <dfustini@...libre.com>
> > > > 
> > > > I tried this on the BeagleV Ahead. They system booted as expected and I
> > > > did not notice any problems in the boot log.
> > > > 
> > > > Are there other patches such as the dwmac series that I should test this
> > > > with?
> > > 
> > > Hmm, this patch is necessary to test dwmac, emmc ;)
> > 
> > Drew: does this fix the "broken DMA" issue you've mentioned in the EMMC
> > support patch?
> 
> After I sent my reply yesterday, I then tried applying this patch on top
> of my eMMC series. I removed SDHCI_QUIRK_BROKEN_DMA and I discovered
> that SDMA did not immediately break and the mmcblk0 partitions appeared
> in /dev [1]. Note - I am using CONFIG_INITRAMFS_SOURCE set to my
> buidlroot rootfs.cpio so that the system will boot okay regardless of
> the emmc.
> 
> I was able to mount the emmc boot partition /dev/mmcblk0p2. However,
> after unmounting it, I noticed that I could not mount it again:
> 
>   # mount /dev/mmcblk0p2 /mnt/p2 
>   [   41.684899] EXT4-fs (mmcblk0p2): mounted filesystem 6ea98ccf-2178-48a9-a1ad-0eb454f57268 r/w with ordered data mode
>   # ls -la /mnt/p2
>   total 22696
>   drwxr-xr-x    5 root     root          4096 Sep  4  2023 .
>   drwxr-xr-x    4 root     root             0 Jan  1 00:00 ..
>   -rw-rw-r--    1 1000     1000      26455552 Sep  4  2023 Image
>   drwxr-xr-x    2 root     root          4096 Jul 29  2023 extlinux
>   <snip>
>   # umount /mnt/p2
>   [   52.101003] EXT4-fs (mmcblk0p2): unmounting filesystem 6ea98ccf-2178-48a9-a1ad-0eb454f57268.
>   # mount /dev/mmcblk0p2 /mnt/p2
>   [   58.826078] JBD2: no valid journal superblock found
>   [   58.831041] EXT4-fs (mmcblk0p2): Could not load journal inode
>   mount: mounting /dev/mmcblk0p2 on /mnt/p2 failed: Invalid argument
> 
> I was completely unable to mount the root fs partition /dev/mmcblk0p3:
> 
>   # mount /dev/mmcblk0p2 /mnt/p2
>   [   58.826078] JBD2: no valid journal superblock found
>   [   58.831041] EXT4-fs (mmcblk0p2): Could not load journal inode
>   mount: mounting /dev/mmcblk0p2 on /mnt/p2 failed: Invalid argument
>   # umount /mnt/p2
>   umount: can't unmount /mnt/p2: Invalid argument
> 
> I suspect there is some corruption of the buffers happening. I see there
> are also these patch series from Jisheng so I will try applying them and
> see if there is any difference:
> 
>   [PATCH v2 0/2] riscv: errata: improve T-Head CMO
>   [PATCH] riscv: mm: update T-Head memory type definitions

Good news, I applied "riscv: errata: improve T-Head CMO" [1] and SDMA is
now working correctly. I can mount both boot and rootfs paritions and
then is no problem umounting and then remounting [2].

Note - I didn't 'riscv: mm: update T-Head memory type definitions' yet
but I will do that next and make sure everything is still working.

I'll post an update to my eMMC series.

-Drew

[1] https://lore.kernel.org/all/20230827090813.1353-1-jszhang@kernel.org/
[2] https://gist.github.com/pdp7/c72c91530c46ef560f4d1940ea1964c9