| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230905233118.183140-4-paul.elder@ideasonboard.com>
Date: Wed, 6 Sep 2023 08:31:18 +0900
From: Paul Elder <paul.elder@...asonboard.com>
To: linux-media@...r.kernel.org
Cc: Paul Elder <paul.elder@...asonboard.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Hans Verkuil <hverkuil-cisco@...all.nl>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org
Subject: [PATCH 3/3] arm64: dts: mediatek: mt8365-pumpkin: Add overlays for thp7312 cameras
Add overlays for the Pumpkin i350 to support THP7312 cameras.
Signed-off-by: Paul Elder <paul.elder@...asonboard.com>
---
arch/arm64/boot/dts/mediatek/Makefile | 4 +
.../mt8365-pumpkin-common-thp7312.dtsi | 23 ++++++
.../mt8365-pumpkin-csi0-thp7312-imx258.dtso | 73 +++++++++++++++++++
.../mt8365-pumpkin-csi1-thp7312-imx258.dtso | 73 +++++++++++++++++++
4 files changed, 173 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt8365-pumpkin-common-thp7312.dtsi
create mode 100644 arch/arm64/boot/dts/mediatek/mt8365-pumpkin-csi0-thp7312-imx258.dtso
create mode 100644 arch/arm64/boot/dts/mediatek/mt8365-pumpkin-csi1-thp7312-imx258.dtso
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 20570bc40de8..ceaf24105001 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -56,4 +56,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-pumpkin.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
+mtk-mt8365-pumpkin-dtbs := mt8365-pumpkin.dtb mt8365-pumpkin-csi0-thp7312-imx258.dtbo
+mtk-mt8365-pumpkin-dtbs := mt8365-pumpkin.dtb mt8365-pumpkin-csi1-thp7312-imx258.dtbo
mtk-mt8365-pumpkin-dtbs := mt8365-pumpkin.dtb mt8365-pumpkin-ethernet-usb.dtbo
+
+dtb-$(CONFIG_ARCH_MEDIATEK) += mtk-mt8365-pumpkin.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt8365-pumpkin-common-thp7312.dtsi b/arch/arm64/boot/dts/mediatek/mt8365-pumpkin-common-thp7312.dtsi
new file mode 100644
index 000000000000..478697552617
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8365-pumpkin-common-thp7312.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023 Ideas on Board
+ * Author: Paul Elder <paul.elder@...asonboard.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+ vsys_v4p2: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vsys-v4p2";
+ regulator-min-microvolt = <4200000>;
+ regulator-max-microvolt = <4200000>;
+ };
+
+ camera61_clk: cam_clk24m {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ #clock-cells = <0>;
+ };
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8365-pumpkin-csi0-thp7312-imx258.dtso b/arch/arm64/boot/dts/mediatek/mt8365-pumpkin-csi0-thp7312-imx258.dtso
new file mode 100644
index 000000000000..740d14a19d75
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8365-pumpkin-csi0-thp7312-imx258.dtso
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023 Ideas on Board
+ * Author: Paul Elder <paul.elder@...asonboard.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/mt8365-pinfunc.h>
+#include "mt8365-pumpkin-common-thp7312.dtsi"
+
+&i2c3 {
+ camera@61 {
+ compatible = "thine,thp7312";
+ reg = <0x61>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cam0_pins_default>;
+ reset-gpios = <&pio 118 GPIO_ACTIVE_LOW>;
+ clocks = <&camera61_clk>;
+
+ vddcore-supply = <&vsys_v4p2>;
+ vhtermrx-supply = <&vsys_v4p2>;
+ vddtx-supply = <&vsys_v4p2>;
+ vddhost-supply = <&vsys_v4p2>;
+ vddcmos-supply = <&vsys_v4p2>;
+ vddgpio_0-supply = <&vsys_v4p2>;
+ vddgpio_1-supply = <&vsys_v4p2>;
+ DOVDD-supply = <&vsys_v4p2>;
+ AVDD-supply = <&vsys_v4p2>;
+ DVDD-supply = <&vsys_v4p2>;
+
+ orientation = <0>;
+ rotation = <0>;
+
+ thine,rx,data-lanes = <4 1 3 2>;
+
+ port {
+ isp1_out: endpoint {
+ remote-endpoint = <&seninf_in1>;
+ data-lanes = <4 2 1 3>;
+ };
+ };
+ };
+};
+
+&pio {
+ cam0_pins_default: cam0_pins_default {
+ pins_rst {
+ pinmux = <MT8365_PIN_118_DMIC0_DAT0__FUNC_GPIO118>;
+ };
+ };
+};
+
+&seninf {
+ status = "okay";
+
+ ports {
+ port@0 {
+ seninf_in1: endpoint {
+ remote-endpoint = <&isp1_out>;
+ clock-lanes = <2>;
+ data-lanes = <1 3 0 4>;
+ };
+ };
+ };
+};
+
+&camsv1 {
+ status = "okay";
+};
+
+&mipi_csi0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8365-pumpkin-csi1-thp7312-imx258.dtso b/arch/arm64/boot/dts/mediatek/mt8365-pumpkin-csi1-thp7312-imx258.dtso
new file mode 100644
index 000000000000..2ebe4e9b56fa
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8365-pumpkin-csi1-thp7312-imx258.dtso
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023 Ideas on Board
+ * Author: Paul Elder <paul.elder@...asonboard.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/mt8365-pinfunc.h>
+#include "mt8365-pumpkin-common-thp7312.dtsi"
+
+&i2c2 {
+ camera@61 {
+ compatible = "thine,thp7312";
+ reg = <0x61>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cam1_pins_default>;
+ reset-gpios = <&pio 119 GPIO_ACTIVE_LOW>;
+ clocks = <&camera61_clk>;
+
+ vddcore-supply = <&vsys_v4p2>;
+ vhtermrx-supply = <&vsys_v4p2>;
+ vddtx-supply = <&vsys_v4p2>;
+ vddhost-supply = <&vsys_v4p2>;
+ vddcmos-supply = <&vsys_v4p2>;
+ vddgpio_0-supply = <&vsys_v4p2>;
+ vddgpio_1-supply = <&vsys_v4p2>;
+ DOVDD-supply = <&vsys_v4p2>;
+ AVDD-supply = <&vsys_v4p2>;
+ DVDD-supply = <&vsys_v4p2>;
+
+ orientation = <0>;
+ rotation = <0>;
+
+ thine,rx,data-lanes = <4 1 3 2>;
+
+ port {
+ isp2_out: endpoint {
+ remote-endpoint = <&seninf_in2>;
+ data-lanes = <4 2 1 3>;
+ };
+ };
+ };
+};
+
+&pio {
+ cam1_pins_default: cam1_pins_default {
+ pins_rst {
+ pinmux = <MT8365_PIN_119_DMIC0_DAT1__FUNC_GPIO119>;
+ };
+ };
+};
+
+&seninf {
+ status = "okay";
+
+ ports {
+ port@1 {
+ seninf_in2: endpoint {
+ remote-endpoint = <&isp2_out>;
+ clock-lanes = <2>;
+ data-lanes = <1 3 0 4>;
+ };
+ };
+ };
+};
+
+&camsv2 {
+ status = "okay";
+};
+
+&mipi_csi1 {
+ status = "okay";
+};
--
2.39.2
Powered by blists - more mailing lists