lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230905052400.13935-4-quic_nitirawa@quicinc.com>
Date:   Tue,  5 Sep 2023 10:53:58 +0530
From:   Nitin Rawat <quic_nitirawa@...cinc.com>
To:     mani@...nel.org, agross@...nel.org, andersson@...nel.org,
        konrad.dybcio@...aro.org, jejb@...ux.ibm.com,
        martin.petersen@...cle.com
Cc:     quic_cang@...cinc.com, quic_nguyenb@...cinc.com,
        linux-scsi@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-msm@...r.kernel.org,
        Nitin Rawat <quic_nitirawa@...cinc.com>,
        Naveen Kumar Goud Arepalli <quic_narepall@...cinc.com>
Subject: [PATCH V8 3/5] scsi: ufs: qcom: Add support to Configure PA_VS_CORE_CLK_40NS_CYCLES

PA_VS_CORE_CLK_40NS_CYCLES attribute represents the required number of
Qunipro core clock for 40 nanoseconds. For UFS host controller V4 and
above PA_VS_CORE_CLK_40NS_CYCLES needs to be programmed as per frequency
of unipro core clk of UFS host controller.

Add Support to configure PA_VS_CORE_CLK_40NS_CYCLES for Controller V4 and
above to align with the hardware specification and to avoid functionality
issues like h8 enter/exit failure, command timeout.

Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@...cinc.com>
Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@...cinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@...cinc.com>
---
 drivers/ufs/host/ufs-qcom.c | 78 ++++++++++++++++++++++++++++++++++++-
 drivers/ufs/host/ufs-qcom.h | 12 ++++++
 2 files changed, 89 insertions(+), 1 deletion(-)

diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index b2be9ff272a4..a4855f0b93b0 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -1292,6 +1292,77 @@ static void ufs_qcom_exit(struct ufs_hba *hba)
 	phy_exit(host->generic_phy);
 }

+/**
+ * ufs_qcom_set_clk_40ns_cycles - Configure 40ns clk cycles
+ *
+ * @hba: host controller instance
+ * @cycles_in_1us: No of cycles in 1us to be configured
+ *
+ * Returns error if dme get/set configuration for 40ns fails
+ * and returns zero on success.
+ */
+static int ufs_qcom_set_clk_40ns_cycles(struct ufs_hba *hba,
+					u32 cycles_in_1us)
+{
+	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+	u32 cycles_in_40ns;
+	u32 reg;
+	int err;
+
+	/*
+	 * UFS host controller V4.0.0 onwards needs to program
+	 * PA_VS_CORE_CLK_40NS_CYCLES attribute per programmed
+	 * frequency of unipro core clk of UFS host controller.
+	 */
+	if (host->hw_ver.major < 4)
+		return 0;
+
+	/*
+	 * Generic formulae for cycles_in_40ns = (freq_unipro/25) is not
+	 * applicable for all frequencies. For ex: ceil(37.5 MHz/25) will
+	 * be 2 and ceil(403 MHZ/25) will be 17 whereas Hardware
+	 * specification expect to be 16. Hence use exact hardware spec
+	 * mandated value for cycles_in_40ns instead of calculating using
+	 * generic formulae.
+	 */
+	switch (cycles_in_1us) {
+	case UNIPRO_CORE_CLK_FREQ_403_MHZ:
+		cycles_in_40ns = 16;
+		break;
+	case UNIPRO_CORE_CLK_FREQ_300_MHZ:
+		cycles_in_40ns = 12;
+		break;
+	case UNIPRO_CORE_CLK_FREQ_201_5_MHZ:
+		cycles_in_40ns = 8;
+		break;
+	case UNIPRO_CORE_CLK_FREQ_150_MHZ:
+		cycles_in_40ns = 6;
+		break;
+	case UNIPRO_CORE_CLK_FREQ_100_MHZ:
+		cycles_in_40ns = 4;
+		break;
+	case  UNIPRO_CORE_CLK_FREQ_75_MHZ:
+		cycles_in_40ns = 3;
+		break;
+	case UNIPRO_CORE_CLK_FREQ_37_5_MHZ:
+		cycles_in_40ns = 2;
+		break;
+	default:
+		dev_err(hba->dev, "UNIPRO clk freq %u MHz not supported\n",
+				cycles_in_1us);
+		return -EINVAL;
+	}
+
+	err = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_VS_CORE_CLK_40NS_CYCLES), &reg);
+	if (err)
+		return err;
+
+	reg &= ~PA_VS_CORE_CLK_40NS_CYCLES_MASK;
+	reg |= cycles_in_40ns;
+
+	return ufshcd_dme_set(hba, UIC_ARG_MIB(PA_VS_CORE_CLK_40NS_CYCLES), reg);
+}
+
 static int ufs_qcom_set_core_clk_ctrl(struct ufs_hba *hba, bool is_scale_up)
 {
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
@@ -1334,9 +1405,14 @@ static int ufs_qcom_set_core_clk_ctrl(struct ufs_hba *hba, bool is_scale_up)
 	/* Clear CORE_CLK_DIV_EN */
 	core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT;

-	return ufshcd_dme_set(hba,
+	err = ufshcd_dme_set(hba,
 			    UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
 			    core_clk_ctrl_reg);
+	if (err)
+		return err;
+
+	/* Configure unipro core clk 40ns attribute */
+	return ufs_qcom_set_clk_40ns_cycles(hba, cycles_in_1us);
 }

 static int ufs_qcom_clk_scale_up_pre_change(struct ufs_hba *hba)
diff --git a/drivers/ufs/host/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h
index 3c6ef1259af3..264d429e72fe 100644
--- a/drivers/ufs/host/ufs-qcom.h
+++ b/drivers/ufs/host/ufs-qcom.h
@@ -132,6 +132,18 @@ enum {
 #define CLK_1US_CYCLES_MASK_V4				GENMASK(27, 16)
 #define CLK_1US_CYCLES_MASK				GENMASK(7, 0)
 #define DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT	BIT(8)
+#define PA_VS_CORE_CLK_40NS_CYCLES			0x9007
+#define PA_VS_CORE_CLK_40NS_CYCLES_MASK			GENMASK(6, 0)
+
+
+/* QCOM UFS host controller core clk frequencies */
+#define UNIPRO_CORE_CLK_FREQ_37_5_MHZ          38
+#define UNIPRO_CORE_CLK_FREQ_75_MHZ            75
+#define UNIPRO_CORE_CLK_FREQ_100_MHZ           100
+#define UNIPRO_CORE_CLK_FREQ_150_MHZ           150
+#define UNIPRO_CORE_CLK_FREQ_300_MHZ           300
+#define UNIPRO_CORE_CLK_FREQ_201_5_MHZ         202
+#define UNIPRO_CORE_CLK_FREQ_403_MHZ           403

 static inline void
 ufs_qcom_get_controller_revision(struct ufs_hba *hba,
--
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ