linux-kernel - [PATCH v3 2/5] drm/kmb: add trailing newlines to drm

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20230906190224.583577-3-jim.cromie@gmail.com>
Date:   Wed,  6 Sep 2023 13:02:20 -0600
From:   Jim Cromie <jim.cromie@...il.com>
To:     linux-kernel@...r.kernel.org, dri-devel@...ts.freedesktop.org,
        amd-gfx@...ts.freedesktop.org, intel-gvt-dev@...ts.freedesktop.org,
        intel-gfx@...ts.freedesktop.org
Cc:     daniel.vetter@...ll.ch, daniel@...ll.ch, jani.nikula@...el.com,
        ville.syrjala@...ux.intel.com, seanpaul@...omium.org,
        robdclark@...il.com, Jim Cromie <jim.cromie@...il.com>,
        Anitha Chrisanthus <anitha.chrisanthus@...el.com>,
        Edmund Dea <edmund.j.dea@...el.com>,
        David Airlie <airlied@...il.com>
Subject: [PATCH v3 2/5] drm/kmb: add trailing newlines to drm_dbg msgs

By at least strong convention, a print-buffer's trailing newline says
"message complete, send it".  The exception (no TNL, followed by a call
to pr_cont) proves the general rule.

Most DRM.debug calls already comport with this: 207 DRM_DEV_DEBUG,
1288 drm_dbg.  Clean up the remainders, in maintainer sized chunks.

No functional changes.

Signed-off-by: Jim Cromie <jim.cromie@...il.com>
---
 drivers/gpu/drm/kmb/kmb_crtc.c  | 10 +++++-----
 drivers/gpu/drm/kmb/kmb_plane.c |  6 +++---
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/kmb/kmb_crtc.c b/drivers/gpu/drm/kmb/kmb_crtc.c
index 647872f65bff..a58baf25322d 100644
--- a/drivers/gpu/drm/kmb/kmb_crtc.c
+++ b/drivers/gpu/drm/kmb/kmb_crtc.c
@@ -94,7 +94,7 @@ static void kmb_crtc_set_mode(struct drm_crtc *crtc,
 	vm.hback_porch = 0;
 	vm.hsync_len = 28;
 
-	drm_dbg(dev, "%s : %dactive height= %d vbp=%d vfp=%d vsync-w=%d h-active=%d h-bp=%d h-fp=%d hsync-l=%d",
+	drm_dbg(dev, "%s : %dactive height= %d vbp=%d vfp=%d vsync-w=%d h-active=%d h-bp=%d h-fp=%d hsync-l=%d\n",
 		__func__, __LINE__,
 			m->crtc_vdisplay, vm.vback_porch, vm.vfront_porch,
 			vm.vsync_len, m->crtc_hdisplay, vm.hback_porch,
@@ -194,24 +194,24 @@ static enum drm_mode_status
 	int vfp = mode->vsync_start - mode->vdisplay;
 
 	if (mode->vdisplay < KMB_CRTC_MAX_HEIGHT) {
-		drm_dbg(dev, "height = %d less than %d",
+		drm_dbg(dev, "height = %d less than %d\n",
 			mode->vdisplay, KMB_CRTC_MAX_HEIGHT);
 		return MODE_BAD_VVALUE;
 	}
 	if (mode->hdisplay < KMB_CRTC_MAX_WIDTH) {
-		drm_dbg(dev, "width = %d less than %d",
+		drm_dbg(dev, "width = %d less than %d\n",
 			mode->hdisplay, KMB_CRTC_MAX_WIDTH);
 		return MODE_BAD_HVALUE;
 	}
 	refresh = drm_mode_vrefresh(mode);
 	if (refresh < KMB_MIN_VREFRESH || refresh > KMB_MAX_VREFRESH) {
-		drm_dbg(dev, "refresh = %d less than %d or greater than %d",
+		drm_dbg(dev, "refresh = %d less than %d or greater than %d\n",
 			refresh, KMB_MIN_VREFRESH, KMB_MAX_VREFRESH);
 		return MODE_BAD;
 	}
 
 	if (vfp < KMB_CRTC_MIN_VFP) {
-		drm_dbg(dev, "vfp = %d less than %d", vfp, KMB_CRTC_MIN_VFP);
+		drm_dbg(dev, "vfp = %d less than %d\n", vfp, KMB_CRTC_MIN_VFP);
 		return MODE_BAD;
 	}
 
diff --git a/drivers/gpu/drm/kmb/kmb_plane.c b/drivers/gpu/drm/kmb/kmb_plane.c
index 9e0562aa2bcb..308bd1cb50c8 100644
--- a/drivers/gpu/drm/kmb/kmb_plane.c
+++ b/drivers/gpu/drm/kmb/kmb_plane.c
@@ -78,7 +78,7 @@ static unsigned int check_pixel_format(struct drm_plane *plane, u32 format)
 	 * plane configuration is not supported.
 	 */
 	if (init_disp_cfg.format && init_disp_cfg.format != format) {
-		drm_dbg(&kmb->drm, "Cannot change format after initial plane configuration");
+		drm_dbg(&kmb->drm, "Cannot change format after initial plane configuration\n");
 		return -EINVAL;
 	}
 	for (i = 0; i < plane->format_count; i++) {
@@ -124,7 +124,7 @@ static int kmb_plane_atomic_check(struct drm_plane *plane,
 	if ((init_disp_cfg.width && init_disp_cfg.height) &&
 	    (init_disp_cfg.width != fb->width ||
 	    init_disp_cfg.height != fb->height)) {
-		drm_dbg(&kmb->drm, "Cannot change plane height or width after initial configuration");
+		drm_dbg(&kmb->drm, "Cannot change plane height or width after initial configuration\n");
 		return -EINVAL;
 	}
 	can_position = (plane->type == DRM_PLANE_TYPE_OVERLAY);
@@ -375,7 +375,7 @@ static void kmb_plane_atomic_update(struct drm_plane *plane,
 	spin_lock_irq(&kmb->irq_lock);
 	if (kmb->kmb_under_flow || kmb->kmb_flush_done) {
 		spin_unlock_irq(&kmb->irq_lock);
-		drm_dbg(&kmb->drm, "plane_update:underflow!!!! returning");
+		drm_dbg(&kmb->drm, "plane_update:underflow!!!! returning\n");
 		return;
 	}
 	spin_unlock_irq(&kmb->irq_lock);
-- 
2.41.0