[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230906-topic-rb1_features_sans_icc-v1-2-e92ce6fbde16@linaro.org>
Date: Wed, 06 Sep 2023 11:24:56 +0200
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Cc: Marijn Suijten <marijn.suijten@...ainline.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Vladimir Zapolskiy <vladimir.zapolskiy@...aro.org>
Subject: [PATCH 2/5] arm64: dts: qcom: qrb2210-rb1: Fix regulators
Commit b4fe47d12f1f ("arm64: dts: qcom: qrb2210-rb1: Add regulators")
introduced regulator settings that were never put in place, as all of the
properties ended 'microvolts' instead of 'microvolt' (which dt schema did
not check for back then).
Fix the microvolts-microvolt typo and adjust voltage ranges where it's
necessary to fit within the volt = base + n*step formula.
Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@...aro.org>
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Fixes: b4fe47d12f1f ("arm64: dts: qcom: qrb2210-rb1: Add regulators")
Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
---
arch/arm64/boot/dts/qcom/qrb2210-rb1.dts | 86 ++++++++++++++++----------------
1 file changed, 43 insertions(+), 43 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
index 5cda5b761455..0f7c59187896 100644
--- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
+++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
@@ -150,15 +150,15 @@ regulators {
pm2250_s3: s3 {
/* 0.4V-1.6625V -> 1.3V (Power tree requirements) */
- regulator-min-microvolts = <1350000>;
- regulator-max-microvolts = <1350000>;
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
regulator-boot-on;
};
pm2250_s4: s4 {
/* 1.2V-2.35V -> 2.05V (Power tree requirements) */
- regulator-min-microvolts = <2072000>;
- regulator-max-microvolts = <2072000>;
+ regulator-min-microvolt = <2072000>;
+ regulator-max-microvolt = <2072000>;
regulator-boot-on;
};
@@ -166,47 +166,47 @@ pm2250_s4: s4 {
pm2250_l2: l2 {
/* LPDDR4X VDD2 */
- regulator-min-microvolts = <1136000>;
- regulator-max-microvolts = <1136000>;
+ regulator-min-microvolt = <1136000>;
+ regulator-max-microvolt = <1136000>;
regulator-always-on;
regulator-boot-on;
};
pm2250_l3: l3 {
/* LPDDR4X VDDQ */
- regulator-min-microvolts = <616000>;
- regulator-max-microvolts = <616000>;
+ regulator-min-microvolt = <616000>;
+ regulator-max-microvolt = <616000>;
regulator-always-on;
regulator-boot-on;
};
pm2250_l4: l4 {
- /* max = 3.05V -> max = just below 3V (SDHCI2) */
- regulator-min-microvolts = <1648000>;
- regulator-max-microvolts = <2992000>;
+ /* max = 3.05V -> max = 2.7 to disable 3V signaling (SDHCI2) */
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2700000>;
regulator-allow-set-load;
};
pm2250_l5: l5 {
/* CSI/DSI */
- regulator-min-microvolts = <1232000>;
- regulator-max-microvolts = <1232000>;
+ regulator-min-microvolt = <1232000>;
+ regulator-max-microvolt = <1232000>;
regulator-allow-set-load;
regulator-boot-on;
};
pm2250_l6: l6 {
/* DRAM PLL */
- regulator-min-microvolts = <928000>;
- regulator-max-microvolts = <928000>;
+ regulator-min-microvolt = <928000>;
+ regulator-max-microvolt = <928000>;
regulator-always-on;
regulator-boot-on;
};
pm2250_l7: l7 {
/* Wi-Fi CX/MX */
- regulator-min-microvolts = <664000>;
- regulator-max-microvolts = <664000>;
+ regulator-min-microvolt = <664000>;
+ regulator-max-microvolt = <664000>;
};
/*
@@ -216,37 +216,37 @@ pm2250_l7: l7 {
pm2250_l10: l10 {
/* Wi-Fi RFA */
- regulator-min-microvolts = <1300000>;
- regulator-max-microvolts = <1300000>;
+ regulator-min-microvolt = <1304000>;
+ regulator-max-microvolt = <1304000>;
};
pm2250_l11: l11 {
/* GPS RF1 */
- regulator-min-microvolts = <1000000>;
- regulator-max-microvolts = <1000000>;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
regulator-boot-on;
};
pm2250_l12: l12 {
/* USB PHYs */
- regulator-min-microvolts = <928000>;
- regulator-max-microvolts = <928000>;
+ regulator-min-microvolt = <928000>;
+ regulator-max-microvolt = <928000>;
regulator-allow-set-load;
regulator-boot-on;
};
pm2250_l13: l13 {
/* USB/QFPROM/PLLs */
- regulator-min-microvolts = <1800000>;
- regulator-max-microvolts = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
regulator-allow-set-load;
regulator-boot-on;
};
pm2250_l14: l14 {
/* SDHCI1 VQMMC */
- regulator-min-microvolts = <1800000>;
- regulator-max-microvolts = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
regulator-allow-set-load;
/* Broken hardware, never turn it off! */
regulator-always-on;
@@ -254,8 +254,8 @@ pm2250_l14: l14 {
pm2250_l15: l15 {
/* WCD/DSI/BT VDDIO */
- regulator-min-microvolts = <1800000>;
- regulator-max-microvolts = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
regulator-allow-set-load;
regulator-always-on;
regulator-boot-on;
@@ -263,47 +263,47 @@ pm2250_l15: l15 {
pm2250_l16: l16 {
/* GPS RF2 */
- regulator-min-microvolts = <1800000>;
- regulator-max-microvolts = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
regulator-boot-on;
};
pm2250_l17: l17 {
- regulator-min-microvolts = <3000000>;
- regulator-max-microvolts = <3000000>;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
};
pm2250_l18: l18 {
/* VDD_PXn */
- regulator-min-microvolts = <1800000>;
- regulator-max-microvolts = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
pm2250_l19: l19 {
/* VDD_PXn */
- regulator-min-microvolts = <1800000>;
- regulator-max-microvolts = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
pm2250_l20: l20 {
/* SDHCI1 VMMC */
- regulator-min-microvolts = <2856000>;
- regulator-max-microvolts = <2856000>;
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3600000>;
regulator-allow-set-load;
};
pm2250_l21: l21 {
/* SDHCI2 VMMC */
- regulator-min-microvolts = <2960000>;
- regulator-max-microvolts = <3300000>;
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <3300000>;
regulator-allow-set-load;
regulator-boot-on;
};
pm2250_l22: l22 {
/* Wi-Fi */
- regulator-min-microvolts = <3312000>;
- regulator-max-microvolts = <3312000>;
+ regulator-min-microvolt = <3312000>;
+ regulator-max-microvolt = <3312000>;
};
};
};
--
2.42.0
Powered by blists - more mailing lists