lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <8eed8cb9-9034-4162-b7bc-958811fb9056@nexus-software.ie>
Date:   Thu, 7 Sep 2023 16:46:18 +0100
From:   Bryan O'Donoghue <pure.logic@...us-software.ie>
To:     Varadarajan Narayanan <quic_varada@...cinc.com>,
        ilia.lin@...nel.org, agross@...nel.org, andersson@...nel.org,
        konrad.dybcio@...aro.org, rafael@...nel.org,
        viresh.kumar@...aro.org, robh+dt@...nel.org,
        krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org,
        mturquette@...libre.com, sboyd@...nel.org,
        quic_kathirav@...cinc.com, linux-pm@...r.kernel.org,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org
Subject: Re: [PATCH v1 06/10] cpufreq: qti: Enable cpufreq for ipq53xx

On 07/09/2023 06:21, Varadarajan Narayanan wrote:
> IPQ53xx have different OPPs available for the CPU based on
> SoC variant. This can be determined through use of an eFuse
> register present in the silicon.
> 
> Added support for ipq53xx on nvmem driver which helps to
> determine OPPs at runtime based on the eFuse register which
> has the CPU frequency limits. opp-supported-hw dt binding
> can be used to indicate the available OPPs for each limit.
> 
> nvmem driver also creates the "cpufreq-dt" platform_device after
> passing the version matching data to the OPP framework so that the
> cpufreq-dt handles the actual cpufreq implementation.
> 
> Signed-off-by: Kathiravan T <quic_kathirav@...cinc.com>
> Signed-off-by: Varadarajan Narayanan <quic_varada@...cinc.com>
> ---
>   drivers/cpufreq/cpufreq-dt-platdev.c |  1 +
>   drivers/cpufreq/qcom-cpufreq-nvmem.c | 15 +++++++++++++++
>   2 files changed, 16 insertions(+)
> 
> diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
> index 02ec58a..f0c45d4 100644
> --- a/drivers/cpufreq/cpufreq-dt-platdev.c
> +++ b/drivers/cpufreq/cpufreq-dt-platdev.c
> @@ -178,6 +178,7 @@ static const struct of_device_id blocklist[] __initconst = {
>   	{ .compatible = "ti,am625", },
>   	{ .compatible = "ti,am62a7", },
>   
> +	{ .compatible = "qcom,ipq5332", },
>   	{ .compatible = "qcom,ipq8064", },
>   	{ .compatible = "qcom,apq8064", },
>   	{ .compatible = "qcom,msm8974", },
> diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c
> index 84d7033..49d21b0 100644
> --- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
> +++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
> @@ -146,6 +146,20 @@ static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
>   		return PTR_ERR(speedbin);
>   
>   	switch (msm_id) {
> +	case QCOM_ID_IPQ5332:
> +	case QCOM_ID_IPQ5322:
> +	case QCOM_ID_IPQ5312:
> +	case QCOM_ID_IPQ5302:
> +	case QCOM_ID_IPQ5300:
> +		/* Fuse Value    Freq    BIT to set
> +		 * ---------------------------------
> +		 *   2’b00     No Limit     BIT(0)
> +		 *   2’b01     1.5 GHz      BIT(1)
> +		 *   2’b10     1.2 Ghz      BIT(2)
> +		 *   2’b11     1.0 GHz      BIT(3)
> +		 */
> +		drv->versions = 1 << (unsigned int)(*speedbin);
> +		break;

I like that you've included a comment however, the switch is an ordered 
list and these values should come after QCOM_ID_APQ8096SG

#define QCOM_ID_MSM8996                 246
#define QCOM_ID_APQ8096                 291
#define QCOM_ID_MSM8996SG               305
#define QCOM_ID_APQ8096SG               312
#define QCOM_ID_IPQ5332                 592
...
#define QCOM_ID_IPQ5300                 624

>   	case QCOM_ID_MSM8996:
>   	case QCOM_ID_APQ8096:
>   		drv->versions = 1 << (unsigned int)(*speedbin);


> @@ -359,6 +373,7 @@ static const struct of_device_id qcom_cpufreq_match_list[] __initconst = {
>   	{ .compatible = "qcom,apq8096", .data = &match_data_kryo },
>   	{ .compatible = "qcom,msm8996", .data = &match_data_kryo },
>   	{ .compatible = "qcom,qcs404", .data = &match_data_qcs404 },
> +	{ .compatible = "qcom,ipq5332", .data = &match_data_kryo },
>   	{ .compatible = "qcom,ipq8064", .data = &match_data_krait },
>   	{ .compatible = "qcom,apq8064", .data = &match_data_krait },
>   	{ .compatible = "qcom,msm8974", .data = &match_data_krait },

Other than that.

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@...aro.org>

---
bod

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ