[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <f0ea9863-e3f0-7a34-9287-15bb2800a0ed@collabora.com>
Date: Thu, 7 Sep 2023 14:10:36 +0200
From: AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>
To: Hsiao Chien Sung <shawn.sung@...iatek.com>,
Chun-Kuang Hu <chunkuang.hu@...nel.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
David Airlie <airlied@...il.com>,
Daniel Vetter <daniel@...ll.ch>,
Matthias Brugger <matthias.bgg@...il.com>,
Jassi Brar <jassisinghbrar@...il.com>
Cc: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org,
Project_Global_Chrome_Upstream_Group@...iatek.com,
Singo Chang <singo.chang@...iatek.com>,
Nancy Lin <nancy.lin@...iatek.com>,
Jason-JH Lin <jason-jh.lin@...iatek.com>
Subject: Re: [PATCH 06/15] drm/mediatek: Support alpha blending in VDOSYS0
Il 23/08/23 17:13, Hsiao Chien Sung ha scritto:
> Support premultiply and coverage alpha blending modes.
>
> Signed-off-by: Hsiao Chien Sung <shawn.sung@...iatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 175 +++++++++++++++++++++---
> 1 file changed, 155 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> index 8f52cc1f3fba..824f81291293 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> @@ -31,6 +31,7 @@
> #define OVL_LAYER_SMI_ID_EN BIT(0)
> #define OVL_BGCLR_SEL_IN BIT(2)
> #define OVL_LAYER_AFBC_EN(n) BIT(4+n)
> +#define OVL_OUTPUT_CLAMP BIT(26)
> #define DISP_REG_OVL_ROI_BGCLR 0x0028
> #define DISP_REG_OVL_SRC_CON 0x002c
> #define DISP_REG_OVL_CON(n) (0x0030 + 0x20 * (n))
> @@ -39,10 +40,28 @@
> #define DISP_REG_OVL_PITCH_MSB(n) (0x0040 + 0x20 * (n))
> #define OVL_PITCH_MSB_2ND_SUBBUF BIT(16)
> #define DISP_REG_OVL_PITCH(n) (0x0044 + 0x20 * (n))
> +#define OVL_CONST_BLEND BIT(28)
> #define DISP_REG_OVL_RDMA_CTRL(n) (0x00c0 + 0x20 * (n))
> #define DISP_REG_OVL_RDMA_GMC(n) (0x00c8 + 0x20 * (n))
> #define DISP_REG_OVL_ADDR_MT2701 0x0040
> #define DISP_REG_OVL_CLRFMT_EXT 0x02D0
> +#define DISP_REG_OVL_CLRFMT_EXT1 0x02D8
> +#define OVL_CLRFMT_EXT1_CSC_EN(n) (1 << ((n) * 4 + 1))
I'd prefer reading (1 << (((n) * 4) + 1) ... but no strong opinions.
> +#define DISP_REG_OVL_Y2R_PARA_R0(n) (0x0134 + 0x28 * (n))
> +#define OVL_Y2R_PARA_C_CF_RMY (GENMASK(14, 0))
> +#define DISP_REG_OVL_Y2R_PARA_G0(n) (0x013c + 0x28 * (n))
> +#define OVL_Y2R_PARA_C_CF_GMU (GENMASK(30, 16))
> +#define DISP_REG_OVL_Y2R_PARA_B1(n) (0x0148 + 0x28 * (n))
> +#define OVL_Y2R_PARA_C_CF_BMV (GENMASK(14, 0))
> +#define DISP_REG_OVL_Y2R_PARA_YUV_A_0(n) (0x014c + 0x28 * (n))
> +#define OVL_Y2R_PARA_C_CF_YA (GENMASK(10, 0))
> +#define OVL_Y2R_PARA_C_CF_UA (GENMASK(26, 16))
> +#define DISP_REG_OVL_Y2R_PARA_YUV_A_1(n) (0x0150 + 0x28 * (n))
> +#define OVL_Y2R_PARA_C_CF_VA (GENMASK(10, 0))
> +#define DISP_REG_OVL_Y2R_PRE_ADD2(n) (0x0154 + 0x28 * (n))
> +#define DISP_REG_OVL_R2R_R0(n) (0x0500 + 0x40 * (n))
> +#define DISP_REG_OVL_R2R_G1(n) (0x0510 + 0x40 * (n))
> +#define DISP_REG_OVL_R2R_B2(n) (0x0520 + 0x40 * (n))
> #define DISP_REG_OVL_ADDR_MT8173 0x0f40
> #define DISP_REG_OVL_ADDR(ovl, n) ((ovl)->data->addr + 0x20 * (n))
> #define DISP_REG_OVL_HDR_ADDR(ovl, n) ((ovl)->data->addr + 0x20 * (n) + 0x04)
> @@ -52,13 +71,19 @@
> #define GMC_THRESHOLD_HIGH ((1 << GMC_THRESHOLD_BITS) / 4)
> #define GMC_THRESHOLD_LOW ((1 << GMC_THRESHOLD_BITS) / 8)
>
> -#define OVL_CON_BYTE_SWAP BIT(24)
> -#define OVL_CON_MTX_YUV_TO_RGB (6 << 16)
> -#define OVL_CON_CLRFMT_RGB (1 << 12)
> -#define OVL_CON_CLRFMT_RGBA8888 (2 << 12)
> -#define OVL_CON_CLRFMT_ARGB8888 (3 << 12)
> -#define OVL_CON_CLRFMT_UYVY (4 << 12)
> -#define OVL_CON_CLRFMT_YUYV (5 << 12)
> +#define OVL_CON_CLRFMT_MAN BIT(23)
> +#define OVL_CON_BYTE_SWAP BIT(24)
> +#define OVL_CON_RGB_SWAP BIT(25)
> +#define OVL_CON_MTX_AUTO_DIS BIT(26)
> +#define OVL_CON_MTX_EN BIT(27)
> +#define OVL_CON_CLRFMT_RGB (1 << 12)
> +#define OVL_CON_CLRFMT_RGBA8888 (2 << 12)
> +#define OVL_CON_CLRFMT_ARGB8888 (3 << 12)
> +#define OVL_CON_CLRFMT_PARGB8888 (OVL_CON_CLRFMT_ARGB8888 | OVL_CON_CLRFMT_MAN)
> +#define OVL_CON_CLRFMT_UYVY (4 << 12)
> +#define OVL_CON_CLRFMT_YUYV (5 << 12)
> +#define OVL_CON_MTX_YUV_TO_RGB (6 << 16)
> +#define OVL_CON_MTX_PROGRAMMABLE (8 << 16)
> #define OVL_CON_CLRFMT_RGB565(ovl) ((ovl)->data->fmt_rgb565_is_0 ? \
> 0 : OVL_CON_CLRFMT_RGB)
> #define OVL_CON_CLRFMT_RGB888(ovl) ((ovl)->data->fmt_rgb565_is_0 ? \
> @@ -72,6 +97,22 @@
> #define OVL_CON_VIRT_FLIP BIT(9)
> #define OVL_CON_HORZ_FLIP BIT(10)
>
> +static inline bool is_10bit_rgb(u32 fmt)
> +{
> + switch (fmt) {
> + case DRM_FORMAT_XRGB2101010:
> + case DRM_FORMAT_ARGB2101010:
> + case DRM_FORMAT_RGBX1010102:
> + case DRM_FORMAT_RGBA1010102:
> + case DRM_FORMAT_XBGR2101010:
> + case DRM_FORMAT_ABGR2101010:
> + case DRM_FORMAT_BGRX1010102:
> + case DRM_FORMAT_BGRA1010102:
> + return true;
> + }
> + return false;
> +}
> +
> static const u32 mt8173_formats[] = {
> DRM_FORMAT_XRGB8888,
> DRM_FORMAT_ARGB8888,
> @@ -89,12 +130,20 @@ static const u32 mt8173_formats[] = {
> static const u32 mt8195_formats[] = {
> DRM_FORMAT_XRGB8888,
> DRM_FORMAT_ARGB8888,
> + DRM_FORMAT_XRGB2101010,
> DRM_FORMAT_ARGB2101010,
> DRM_FORMAT_BGRX8888,
> DRM_FORMAT_BGRA8888,
> + DRM_FORMAT_BGRX1010102,
> DRM_FORMAT_BGRA1010102,
> DRM_FORMAT_ABGR8888,
> DRM_FORMAT_XBGR8888,
> + DRM_FORMAT_XBGR2101010,
> + DRM_FORMAT_ABGR2101010,
> + DRM_FORMAT_RGBX8888,
> + DRM_FORMAT_RGBA8888,
> + DRM_FORMAT_RGBX1010102,
> + DRM_FORMAT_RGBA1010102,
> DRM_FORMAT_RGB888,
> DRM_FORMAT_BGR888,
> DRM_FORMAT_RGB565,
> @@ -208,14 +257,14 @@ void mtk_ovl_clk_disable(struct device *dev)
> void mtk_ovl_start(struct device *dev)
> {
> struct mtk_disp_ovl *ovl = dev_get_drvdata(dev);
> + unsigned int reg = 0;
>
> if (ovl->data->smi_id_en) {
> - unsigned int reg;
> -
> reg = readl(ovl->regs + DISP_REG_OVL_DATAPATH_CON);
> reg = reg | OVL_LAYER_SMI_ID_EN;
> - writel_relaxed(reg, ovl->regs + DISP_REG_OVL_DATAPATH_CON);
> }
> + reg |= OVL_OUTPUT_CLAMP;
Uhm, I wonder if clearing out the register and setting only the OVL_OUTPUT_CLAMP
bit is is intentional, or if you wanted to do, instead...
u32 reg = readl(ovl->regs + DISP_REG_OVL_DATAPATH_CON);
if (ovl->data->smi_id_en)
reg |= OVL_LAYER_SMI_ID_EN;
reg |= OVL_OUTPUT_CLAMP
writel_relaxed(reg, ovl->regs + DISP_REG_OVL_DATAPATH_CON);
> + writel_relaxed(reg, ovl->regs + DISP_REG_OVL_DATAPATH_CON);
> writel_relaxed(0x1, ovl->regs + DISP_REG_OVL_EN);
> }
>
> @@ -254,9 +303,7 @@ static void mtk_ovl_set_bit_depth(struct device *dev, int idx, u32 format,
> reg = readl(ovl->regs + DISP_REG_OVL_CLRFMT_EXT);
> reg &= ~OVL_CON_CLRFMT_BIT_DEPTH_MASK(idx);
>
> - if (format == DRM_FORMAT_RGBA1010102 ||
> - format == DRM_FORMAT_BGRA1010102 ||
> - format == DRM_FORMAT_ARGB2101010)
> + if (is_10bit_rgb(format))
> bit_depth = OVL_CON_CLRFMT_10_BIT;
>
> reg |= OVL_CON_CLRFMT_BIT_DEPTH(bit_depth, idx);
> @@ -357,7 +404,8 @@ void mtk_ovl_layer_off(struct device *dev, unsigned int idx,
> DISP_REG_OVL_RDMA_CTRL(idx));
> }
>
> -static unsigned int ovl_fmt_convert(struct mtk_disp_ovl *ovl, unsigned int fmt)
> +static unsigned int ovl_fmt_convert(struct mtk_disp_ovl *ovl, unsigned int fmt,
> + unsigned int blend_mode)
> {
> /* The return value in switch "MEM_MODE_INPUT_FORMAT_XXX"
> * is defined in mediatek HW data sheet.
> @@ -376,17 +424,37 @@ static unsigned int ovl_fmt_convert(struct mtk_disp_ovl *ovl, unsigned int fmt)
> return OVL_CON_CLRFMT_RGB888(ovl) | OVL_CON_BYTE_SWAP;
> case DRM_FORMAT_RGBX8888:
> case DRM_FORMAT_RGBA8888:
> + return blend_mode == DRM_MODE_BLEND_COVERAGE ?
> + OVL_CON_CLRFMT_ARGB8888 :
> + OVL_CON_CLRFMT_PARGB8888;
> + case DRM_FORMAT_RGBX1010102:
> + case DRM_FORMAT_RGBA1010102:
> return OVL_CON_CLRFMT_ARGB8888;
> case DRM_FORMAT_BGRX8888:
> case DRM_FORMAT_BGRA8888:
> + return OVL_CON_BYTE_SWAP |
> + (blend_mode == DRM_MODE_BLEND_COVERAGE ?
> + OVL_CON_CLRFMT_ARGB8888 :
> + OVL_CON_CLRFMT_PARGB8888);
> + case DRM_FORMAT_BGRX1010102:
> case DRM_FORMAT_BGRA1010102:
> return OVL_CON_CLRFMT_ARGB8888 | OVL_CON_BYTE_SWAP;
> case DRM_FORMAT_XRGB8888:
> case DRM_FORMAT_ARGB8888:
> + return blend_mode == DRM_MODE_BLEND_COVERAGE ?
> + OVL_CON_CLRFMT_RGBA8888 :
> + OVL_CON_CLRFMT_PARGB8888;
> + case DRM_FORMAT_XRGB2101010:
> case DRM_FORMAT_ARGB2101010:
> return OVL_CON_CLRFMT_RGBA8888;
> case DRM_FORMAT_XBGR8888:
> case DRM_FORMAT_ABGR8888:
> + return OVL_CON_RGB_SWAP |
> + (blend_mode == DRM_MODE_BLEND_COVERAGE ?
> + OVL_CON_CLRFMT_RGBA8888 :
> + OVL_CON_CLRFMT_PARGB8888);
> + case DRM_FORMAT_XBGR2101010:
> + case DRM_FORMAT_ABGR2101010:
> return OVL_CON_CLRFMT_RGBA8888 | OVL_CON_BYTE_SWAP;
> case DRM_FORMAT_UYVY:
> return OVL_CON_CLRFMT_UYVY | OVL_CON_MTX_YUV_TO_RGB;
> @@ -408,6 +476,8 @@ void mtk_ovl_layer_config(struct device *dev, unsigned int idx,
> unsigned int fmt = pending->format;
> unsigned int offset = (pending->y << 16) | pending->x;
> unsigned int src_size = (pending->height << 16) | pending->width;
> + unsigned int blend_mode = state->base.pixel_blend_mode;
> + unsigned int ignore_pixel_alpha = 0;
> unsigned int con;
> bool is_afbc = pending->modifier != DRM_FORMAT_MOD_LINEAR;
> union overlay_pitch {
> @@ -420,14 +490,79 @@ void mtk_ovl_layer_config(struct device *dev, unsigned int idx,
>
> overlay_pitch.pitch = pitch;
>
> - if (!pending->enable) {
> + if (!pending->enable || !pending->width || !pending->height) {
> mtk_ovl_layer_off(dev, idx, cmdq_pkt);
> return;
> }
>
> - con = ovl_fmt_convert(ovl, fmt);
> - if (state->base.fb && state->base.fb->format->has_alpha)
> - con |= OVL_CON_AEN | OVL_CON_ALPHA;
> + con = ovl_fmt_convert(ovl, fmt, blend_mode);
> + if (state->base.fb) {
> + con |= OVL_CON_AEN;
> + con |= state->base.alpha & 0xff;
> + }
> +
> + if (blend_mode == DRM_MODE_BLEND_PIXEL_NONE ||
> + (state->base.fb && !state->base.fb->format->has_alpha))
> + ignore_pixel_alpha = OVL_CONST_BLEND;
> +
> + /* need to do Y2R and R2R to reduce 10bit data to 8bit for CRC calculation */
> + if (ovl->data->supports_clrfmt_ext) {
> + u32 y2r_coef = 0, y2r_offset = 0, r2r_coef = 0, csc_en = 0;
> +
> + if (is_10bit_rgb(fmt)) {
> + con |= OVL_CON_MTX_AUTO_DIS | OVL_CON_MTX_EN | OVL_CON_MTX_PROGRAMMABLE;
> +
> + /* Y2R coef setting: bit 13 is 2^1, bit 12 is 2^0, bit 11 is 2^-1, ... */
> + y2r_coef = BIT(10); /* bit 10 is 2^-2 = 0.25 */
> + y2r_offset = 0x7fe; /* -1 in 10bit */
Is it possible to calculate this with a macro, instead of hardcoding the 0x7fe value?
Regards,
Angelo
> + /* R2R coef setting: bit 19 is 2^1, bit 18 is 2^0, bit 17 is 2^-1, ... */
> + r2r_coef = BIT(20); /* bit 20 is 2^2 = 4 */
> + csc_en = OVL_CLRFMT_EXT1_CSC_EN(idx); /* CSC_EN is for R2R */
> +
> + /*
> + * 1. YUV input data - 1 and shift right for 2 bits to remove it
> + * [R'] [0.25 0 0] [Y in - 1]
> + * [G'] = [ 0 0.25 0] * [U in - 1]
> + * [B'] [ 0 0 0.25] [V in - 1]
> + *
> + * 2. shift left for 2 bit letting the last 2 bits become 0
> + * [R out] [ 4 0 0] [R']
> + * [G out] = [ 0 4 0] * [G']
> + * [B out] [ 0 0 4] [B']
> + */
> + }
> +
> + mtk_ddp_write_mask(cmdq_pkt, y2r_coef,
> + &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_Y2R_PARA_R0(idx),
> + OVL_Y2R_PARA_C_CF_RMY);
> + mtk_ddp_write_mask(cmdq_pkt, (y2r_coef << 16),
> + &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_Y2R_PARA_G0(idx),
> + OVL_Y2R_PARA_C_CF_GMU);
> + mtk_ddp_write_mask(cmdq_pkt, y2r_coef,
> + &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_Y2R_PARA_B1(idx),
> + OVL_Y2R_PARA_C_CF_BMV);
> +
> + mtk_ddp_write_mask(cmdq_pkt, y2r_offset,
> + &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_Y2R_PARA_YUV_A_0(idx),
> + OVL_Y2R_PARA_C_CF_YA);
> + mtk_ddp_write_mask(cmdq_pkt, (y2r_offset << 16),
> + &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_Y2R_PARA_YUV_A_0(idx),
> + OVL_Y2R_PARA_C_CF_UA);
> + mtk_ddp_write_mask(cmdq_pkt, y2r_offset,
> + &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_Y2R_PARA_YUV_A_1(idx),
> + OVL_Y2R_PARA_C_CF_VA);
> +
> + mtk_ddp_write_relaxed(cmdq_pkt, r2r_coef,
> + &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_R2R_R0(idx));
> + mtk_ddp_write_relaxed(cmdq_pkt, r2r_coef,
> + &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_R2R_G1(idx));
> + mtk_ddp_write_relaxed(cmdq_pkt, r2r_coef,
> + &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_R2R_B2(idx));
> +
> + mtk_ddp_write_mask(cmdq_pkt, csc_en,
> + &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_CLRFMT_EXT1,
> + OVL_CLRFMT_EXT1_CSC_EN(idx));
> + }
>
> if (pending->rotation & DRM_MODE_REFLECT_Y) {
> con |= OVL_CON_VIRT_FLIP;
> @@ -444,8 +579,8 @@ void mtk_ovl_layer_config(struct device *dev, unsigned int idx,
>
> mtk_ddp_write_relaxed(cmdq_pkt, con, &ovl->cmdq_reg, ovl->regs,
> DISP_REG_OVL_CON(idx));
> - mtk_ddp_write_relaxed(cmdq_pkt, overlay_pitch.split_pitch.lsb, &ovl->cmdq_reg, ovl->regs,
> - DISP_REG_OVL_PITCH(idx));
> + mtk_ddp_write_relaxed(cmdq_pkt, overlay_pitch.split_pitch.lsb | ignore_pixel_alpha,
> + &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_PITCH(idx));
> mtk_ddp_write_relaxed(cmdq_pkt, src_size, &ovl->cmdq_reg, ovl->regs,
> DISP_REG_OVL_SRC_SIZE(idx));
> mtk_ddp_write_relaxed(cmdq_pkt, offset, &ovl->cmdq_reg, ovl->regs,
Powered by blists - more mailing lists