[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAHCN7x+c76w61BDO_xLrnrYGX7Vnb6tEifectbgo+g2_CT48rQ@mail.gmail.com>
Date: Thu, 7 Sep 2023 08:06:05 -0500
From: Adam Ford <aford173@...il.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Cc: linux-omap@...r.kernel.org, aford@...conembedded.com,
Benoît Cousson <bcousson@...libre.com>,
Tony Lindgren <tony@...mide.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
"Derald D. Woods" <woods.technical@...il.com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/2] arm:dts: am3517-evm: Fix LED3/4 pinmux
On Thu, Sep 7, 2023 at 1:11 AM Krzysztof Kozlowski
<krzysztof.kozlowski@...aro.org> wrote:
>
> On 07/09/2023 03:01, Adam Ford wrote:
> > The pinmux for LED3 and LED4 are incorrectly attached to the
> > omap3_pmx_core when they should be connected to the omap3_pmx_wkup
> > pin mux. This was likely masked by the fact that the bootloader
> > used to do all the pinmuxing.
> >
> > Fixes: 0dbf99542caf ("ARM: dts: am3517-evm: Add User LEDs and Pushbutton")
> > Signed-off-by: Adam Ford <aford173@...il.com>
> > ---
> > This likely cannot apply to the original series, because the file has
> > moved. I can generate a separate patch for the pre-move device trees
> > if necesssary. The original location was:
> > arch/arm/boot/dts/am3517-evm.dts
> >
> > diff --git a/arch/arm/boot/dts/ti/omap/am3517-evm.dts b/arch/arm/boot/dts/ti/omap/am3517-evm.dts
> > index af9df15274be..738189ddc8d5 100644
> > --- a/arch/arm/boot/dts/ti/omap/am3517-evm.dts
> > +++ b/arch/arm/boot/dts/ti/omap/am3517-evm.dts
> > @@ -271,13 +271,6 @@ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
> > >;
> > };
> >
> > - leds_pins: leds-pins {
> > - pinctrl-single,pins = <
> > - OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu0.gpio_11 */
> > - OMAP3_WKUP_IOPAD(0x2a26, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu1.gpio_31 */
> > - >;
> > - };
> > -
> > mmc1_pins: mmc1-pins {
> > pinctrl-single,pins = <
> > OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
> > @@ -355,3 +348,12 @@ OMAP3430_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3) /* etk_d3.hsusb1_data7 */
> > >;
> > };
> > };
> > +
> > +&omap3_pmx_wkup {
> > + leds_pins: pinmux_leds_pins {
>
> Come on... why moving it and changing the name to incorrect one? Isn't a
> move cut-paste?
I applied a patch from an older branch, so I didn't notice the name
convention changed. Sorry about that. I'll re-spin both patches with
the pin-mux naming conventions fixed.
adam
>
> Best regards,
> Krzysztof
>
Powered by blists - more mailing lists