[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 6.5.1-nopatch (cocoa@cumin) (aarch64-linux-gnu-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.41) #1 SMP Fri Sep 8 01:57:22 JST 2023 [ 0.000000] Machine model: FriendlyElec NanoPi R4S [ 0.000000] earlycon: uart0 at MMIO32 0x00000000ff1a0000 (options '1500000n8') [ 0.000000] printk: bootconsole [uart0] enabled [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000200000-0x00000000f7ffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff] [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.4 [ 0.000000] percpu: Embedded 17 pages/cpu s38176 r0 d31456 u69632 [ 0.000000] pcpu-alloc: s38176 r0 d31456 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: earlycon console=ttyS2,1500000n8 rdinit=/sbin/init [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.000000] software IO TLB: area num 8. [ 0.000000] software IO TLB: mapped [mem 0x00000000ede00000-0x00000000f1e00000] (64MB) [ 0.000000] Memory: 3897700K/4061184K available (8512K kernel code, 1560K rwdata, 2892K rodata, 2112K init, 514K bss, 163484K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 256 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000 [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff] [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @480000 (flat, esz 8, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GICv3: using LPI property table @0x0000000000450000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000000460000 [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] } [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] } [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.002580] Console: colour dummy device 80x25 [ 0.003054] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000) [ 0.004025] pid_max: default: 32768 minimum: 301 [ 0.009998] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.010721] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.015364] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.017090] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.018174] rcu: Hierarchical SRCU implementation. [ 0.018622] rcu: Max phase no-delay instances is 400. [ 0.019950] Platform MSI: msi-controller@fee20000 domain created [ 0.021029] PCI/MSI: /interrupt-controller@fee00000/msi-controller@fee20000 domain created [ 0.023445] smp: Bringing up secondary CPUs ... [ 0.024795] Detected VIPT I-cache on CPU1 [ 0.024886] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000 [ 0.024910] GICv3: CPU1: using allocated LPI pending table @0x0000000000470000 [ 0.024974] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.025908] Detected VIPT I-cache on CPU2 [ 0.025978] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000 [ 0.025996] GICv3: CPU2: using allocated LPI pending table @0x0000000000500000 [ 0.026037] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.026998] Detected VIPT I-cache on CPU3 [ 0.027065] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000 [ 0.027083] GICv3: CPU3: using allocated LPI pending table @0x0000000000510000 [ 0.027121] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.028015] CPU features: detected: Spectre-v2 [ 0.028031] CPU features: detected: Spectre-BHB [ 0.028040] Detected PIPT I-cache on CPU4 [ 0.028120] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000 [ 0.028138] GICv3: CPU4: using allocated LPI pending table @0x0000000000520000 [ 0.028182] CPU4: Booted secondary processor 0x0000000100 [0x410fd082] [ 0.029112] Detected PIPT I-cache on CPU5 [ 0.029177] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000 [ 0.029195] GICv3: CPU5: using allocated LPI pending table @0x0000000000530000 [ 0.029230] CPU5: Booted secondary processor 0x0000000101 [0x410fd082] [ 0.029361] smp: Brought up 1 node, 6 CPUs [ 0.041994] SMP: Total of 6 processors activated. [ 0.042434] CPU features: detected: 32-bit EL0 Support [ 0.042925] CPU features: detected: CRC32 instructions [ 0.043545] CPU: All CPU(s) started at EL2 [ 0.043945] alternatives: applying system-wide alternatives [ 0.048394] devtmpfs: initialized [ 0.062332] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.063310] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.066472] pinctrl core: initialized pinctrl subsystem [ 0.068747] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.069691] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.070691] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.072551] thermal_sys: Registered thermal governor 'fair_share' [ 0.072561] thermal_sys: Registered thermal governor 'bang_bang' [ 0.073136] thermal_sys: Registered thermal governor 'step_wise' [ 0.073710] thermal_sys: Registered thermal governor 'user_space' [ 0.074277] thermal_sys: Registered thermal governor 'power_allocator' [ 0.075063] cpuidle: using governor ladder [ 0.076335] cpuidle: using governor menu [ 0.076851] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.077683] ASID allocator initialised with 65536 entries [ 0.079056] Serial: AMBA PL011 UART driver [ 0.104019] platform ff940000.hdmi: Fixed dependency cycle(s) with /vop@ff8f0000/port/endpoint@2 [ 0.104889] platform ff940000.hdmi: Fixed dependency cycle(s) with /vop@ff900000/port/endpoint@2 [ 0.112689] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.114142] rockchip-gpio ff720000.gpio: probed /pinctrl/gpio@ff720000 [ 0.115279] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.116388] rockchip-gpio ff730000.gpio: probed /pinctrl/gpio@ff730000 [ 0.117362] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.118456] rockchip-gpio ff780000.gpio: probed /pinctrl/gpio@ff780000 [ 0.119469] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.120556] rockchip-gpio ff788000.gpio: probed /pinctrl/gpio@ff788000 [ 0.121514] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.122601] rockchip-gpio ff790000.gpio: probed /pinctrl/gpio@ff790000 [ 0.129101] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.129765] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.130359] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.131005] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.131597] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.132240] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.132832] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.133475] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.135418] cryptd: max_cpu_qlen set to 1000 [ 0.137868] iommu: Default domain type: Translated [ 0.138327] iommu: DMA domain TLB invalidation policy: strict mode [ 0.139699] SCSI subsystem initialized [ 0.140292] libata version 3.00 loaded. [ 0.140450] usbcore: registered new interface driver usbfs [ 0.141025] usbcore: registered new interface driver hub [ 0.141561] usbcore: registered new device driver usb [ 0.142437] EDAC MC: Ver: 3.0.0 [ 0.143345] scmi_core: SCMI protocol bus registered [ 0.144403] clocksource: Switched to clocksource arch_sys_counter [ 0.158667] PCI: CLS 0 bytes, default 64 [ 0.159469] Unpacking initramfs... [ 0.170614] workingset: timestamp_bits=62 max_order=20 bucket_order=0 [ 0.171294] zbud: loaded [ 0.230835] xor: measuring software checksum speed [ 0.234705] 8regs : 2906 MB/sec [ 0.238276] 32regs : 3124 MB/sec [ 0.242587] arm64_neon : 2536 MB/sec [ 0.243006] xor: using function: 32regs (3124 MB/sec) [ 0.243509] async_tx: api initialized (async) [ 0.244046] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.244769] io scheduler mq-deadline registered [ 0.245201] io scheduler kyber registered [ 0.245838] io scheduler bfq registered [ 0.266753] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 0.267503] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12 [ 0.270100] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 0.270854] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 [ 0.273973] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.277868] printk: console [ttyS2] disabled [ 0.278689] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 36, base_baud = 1500000) is a 16550A [ 0.279736] printk: console [ttyS2] enabled [ 0.280518] printk: bootconsole [uart0] disabled [ 0.302589] phy phy-ff800000.phy.10: phy poweron failed --> -110 [ 0.303166] dwc3 fe900000.usb: error -ETIMEDOUT: failed to initialize core [ 0.303884] dwc3: probe of fe900000.usb failed with error -110 [ 0.307836] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 0.308209] rockchip-usb2phy ff770000.syscon:usb2phy@e460: Requested PHY is disabled [ 0.308599] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 0.309050] ehci-platform fe3c0000.usb: EHCI Host Controller [ 0.309050] rockchip-usb2phy ff770000.syscon:usb2phy@e460: Requested PHY is disabled [ 0.309064] ohci-platform fe3e0000.usb: Generic Platform OHCI controller [ 0.309306] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2 [ 0.309522] ohci-platform fe3e0000.usb: irq 47, io mem 0xfe3e0000 [ 0.309853] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002000010 [ 0.310209] ehci-platform fe380000.usb: EHCI Host Controller [ 0.310231] ohci-platform fe3a0000.usb: Generic Platform OHCI controller [ 0.310461] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 3 [ 0.310583] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 4 [ 0.310625] ehci-platform fe3c0000.usb: irq 45, io mem 0xfe3c0000 [ 0.310710] ohci-platform fe3a0000.usb: irq 46, io mem 0xfe3a0000 [ 0.310961] xhci-hcd xhci-hcd.0.auto: irq 43, io mem 0xfe800000 [ 0.311770] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 5 [ 0.312398] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 0.312867] ehci-platform fe380000.usb: irq 44, io mem 0xfe380000 [ 0.313757] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6 [ 0.318416] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00 [ 0.318829] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 0.319749] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 [ 0.321879] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.322542] usb usb3: Product: EHCI Host Controller [ 0.322981] usb usb3: Manufacturer: Linux 6.5.1-nopatch ehci_hcd [ 0.323529] usb usb3: SerialNumber: fe3c0000.usb [ 0.324652] hub 3-0:1.0: USB hub found [ 0.325049] hub 3-0:1.0: 1 port detected [ 0.325410] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00 [ 0.326888] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 [ 0.327646] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.328291] usb usb1: Product: xHCI Host Controller [ 0.328742] usb usb1: Manufacturer: Linux 6.5.1-nopatch xhci-hcd [ 0.329280] usb usb1: SerialNumber: xhci-hcd.0.auto [ 0.330443] hub 1-0:1.0: USB hub found [ 0.330854] hub 1-0:1.0: 1 port detected [ 0.331867] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.332904] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 [ 0.333657] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.334297] usb usb6: Product: xHCI Host Controller [ 0.334745] usb usb6: Manufacturer: Linux 6.5.1-nopatch xhci-hcd [ 0.335278] usb usb6: SerialNumber: xhci-hcd.0.auto [ 0.336312] hub 6-0:1.0: USB hub found [ 0.336731] hub 6-0:1.0: 1 port detected [ 0.337762] usbcore: registered new interface driver cdc_wdm [ 0.337965] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 [ 0.338305] usbcore: registered new interface driver usbtmc [ 0.338484] Freeing initrd memory: 2828K [ 0.339024] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.339804] usbcore: registered new interface driver uas [ 0.339870] usb usb5: Product: EHCI Host Controller [ 0.340572] usbcore: registered new interface driver usb-storage [ 0.340983] usb usb5: Manufacturer: Linux 6.5.1-nopatch ehci_hcd [ 0.341446] usbcore: registered new interface driver ums-realtek [ 0.341950] usb usb5: SerialNumber: fe380000.usb [ 0.344089] hub 5-0:1.0: USB hub found [ 0.344505] hub 5-0:1.0: 1 port detected [ 0.347005] i2c 0-001b: Fixed dependency cycle(s) with /i2c@ff3c0000/pmic@1b/regulators/LDO_REG8 [ 0.349860] device-mapper: uevent: version 1.0.3 [ 0.350625] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 0.353576] sdhci: Secure Digital Host Controller Interface driver [ 0.354128] sdhci: Copyright(c) Pierre Ossman [ 0.354764] Synopsys Designware Multimedia Card Interface Driver [ 0.355860] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.358577] ledtrig-cpu: registered to indicate activity on CPUs [ 0.361957] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.366262] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.05 [ 0.366790] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 0.367056] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.368393] usb usb2: Product: Generic Platform OHCI controller [ 0.368925] usb usb2: Manufacturer: Linux 6.5.1-nopatch ohci_hcd [ 0.369475] usb usb2: SerialNumber: fe3e0000.usb [ 0.369958] watchdog: Delayed init of the lockup detector failed: -19 [ 0.370547] watchdog: Hard watchdog permanently disabled [ 0.371179] hub 2-0:1.0: USB hub found [ 0.371676] hub 2-0:1.0: 1 port detected [ 0.373501] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.05 [ 0.374242] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.374910] usb usb4: Product: Generic Platform OHCI controller [ 0.375459] usb usb4: Manufacturer: Linux 6.5.1-nopatch ohci_hcd [ 0.375997] usb usb4: SerialNumber: fe3a0000.usb [ 0.377249] hub 4-0:1.0: USB hub found [ 0.377681] hub 4-0:1.0: 1 port detected [ 0.379955] zswap: loaded using pool lz4/z3fold [ 0.745294] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 0.876643] usb 1-1: New USB device found, idVendor=0411, idProduct=0111, bcdDevice= 1.00 [ 0.877430] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 0.878067] usb 1-1: Product: USB Flash Disk [ 0.878467] usb 1-1: Manufacturer: BUFFALO [ 0.878838] usb 1-1: SerialNumber: 07B31F089445408A [ 0.881538] usb-storage 1-1:1.0: USB Mass Storage device detected [ 0.883168] scsi host0: usb-storage 1-1:1.0 [ 1.676527] rk808-regulator rk808-regulator: there is no dvs0 gpio [ 1.677126] rk808-regulator rk808-regulator: there is no dvs1 gpio [ 1.707794] clk: Disabling unused clocks [ 1.707875] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode. [ 1.708863] dwmmc_rockchip fe320000.mmc: Using internal DMA controller. [ 1.709498] dwmmc_rockchip fe320000.mmc: Version ID is 270a [ 1.709958] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges: [ 1.710063] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 64,32 bit host data width,256 deep fifo [ 1.710662] rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000 [ 1.711965] dwmmc_rockchip fe320000.mmc: Got CD GPIO [ 1.712340] rockchip-pcie f8000000.pcie: IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000 [ 1.713816] dw-apb-uart ff1a0000.serial: forbid DMA for kernel console [ 1.714270] rockchip-pcie f8000000.pcie: no vpcie12v regulator found [ 1.717081] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00 [ 1.717719] pci_bus 0000:00: root bus resource [bus 00-1f] [ 1.718218] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff] [ 1.718856] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff]) [ 1.719763] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400 [ 1.720430] pci 0000:00:00.0: supports D1 [ 1.720797] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 1.725923] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 1.727832] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.728820] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 1.729441] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid [ 1.730072] pci 0000:01:00.0: reg 0x10: [io size 0x0100] [ 1.730644] pci 0000:01:00.0: reg 0x18: [mem 0xfa004000-0xfa004fff 64bit] [ 1.731298] pci 0000:01:00.0: reg 0x20: [mem 0xfa000000-0xfa003fff 64bit] [ 1.731966] pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256) [ 1.732755] pci 0000:01:00.0: Max Payload Size set to 128 (was 128, max 128) [ 1.733739] pci 0000:01:00.0: supports D1 D2 [ 1.734126] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.738467] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01 [ 1.739091] pci 0000:00:00.0: BAR 14: assigned [mem 0xfa000000-0xfa0fffff] [ 1.739740] pci 0000:01:00.0: BAR 4: assigned [mem 0xfa000000-0xfa003fff 64bit] [ 1.740454] pci 0000:01:00.0: BAR 2: assigned [mem 0xfa004000-0xfa004fff 64bit] [ 1.741145] pci 0000:01:00.0: BAR 0: no space for [io size 0x0100] [ 1.741734] pci 0000:01:00.0: BAR 0: failed to assign [io size 0x0100] [ 1.742121] Freeing unused kernel memory: 2112K [ 1.742328] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.743188] pci 0000:00:00.0: bridge window [mem 0xfa000000-0xfa0fffff] [ 1.744100] pcieport 0000:00:00.0: enabling device (0000 -> 0002) [ 1.745022] pcieport 0000:00:00.0: PME: Signaling with IRQ 70 [ 1.746151] pcieport 0000:00:00.0: AER: enabled with IRQ 70 [ 1.777245] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 1.778212] mmc1: new high speed SDHC card at address b368 [ 1.780857] mmcblk1: mmc1:b368 USD 7.47 GiB [ 1.792239] mmcblk1: p1 [ 1.808245] Checked W+X mappings: passed, no W+X pages found [ 1.808779] rodata_test: all tests were successful [ 1.809213] Run /sbin/init as init process [ 1.809591] with arguments: [ 1.809599] /sbin/init [ 1.809607] with environment: [ 1.809613] HOME=/ [ 1.809620] TERM=linux [ 1.897484] scsi 0:0:0:0: Direct-Access BUFFALO USB Flash Disk 3.10 PQ: 0 ANSI: 0 CCS [ 1.899573] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.901140] sd 0:0:0:0: [sda] 7831552 512-byte logical blocks: (4.01 GB/3.73 GiB) [ 1.903450] sd 0:0:0:0: [sda] Write Protect is off [ 1.903891] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 [ 1.905776] sd 0:0:0:0: [sda] No Caching mode page found [ 1.906259] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 1.931561] sda: sda1 [ 1.932572] sd 0:0:0:0: [sda] Attached SCSI removable disk