[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 6.5.1-dwc3test (cocoa@cumin) (aarch64-linux-gnu-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.41) #7 SMP Fri Sep 8 01:54:18 JST 2023 [ 0.000000] Machine model: FriendlyElec NanoPi R4S [ 0.000000] earlycon: uart0 at MMIO32 0x00000000ff1a0000 (options '1500000n8') [ 0.000000] printk: bootconsole [uart0] enabled [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000200000-0x00000000f7ffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff] [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.4 [ 0.000000] percpu: Embedded 17 pages/cpu s38176 r0 d31456 u69632 [ 0.000000] pcpu-alloc: s38176 r0 d31456 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: earlycon console=ttyS2,1500000n8 rdinit=/sbin/init [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.000000] software IO TLB: area num 8. [ 0.000000] software IO TLB: mapped [mem 0x00000000ede00000-0x00000000f1e00000] (64MB) [ 0.000000] Memory: 3897700K/4061184K available (8512K kernel code, 1560K rwdata, 2892K rodata, 2112K init, 514K bss, 163484K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 256 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000 [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff] [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @480000 (flat, esz 8, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GICv3: using LPI property table @0x0000000000450000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000000460000 [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] } [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] } [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.002575] Console: colour dummy device 80x25 [ 0.003050] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000) [ 0.004017] pid_max: default: 32768 minimum: 301 [ 0.010072] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.010796] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.015475] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.017208] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.018294] rcu: Hierarchical SRCU implementation. [ 0.018743] rcu: Max phase no-delay instances is 400. [ 0.020074] Platform MSI: msi-controller@fee20000 domain created [ 0.021150] PCI/MSI: /interrupt-controller@fee00000/msi-controller@fee20000 domain created [ 0.023552] smp: Bringing up secondary CPUs ... [ 0.024900] Detected VIPT I-cache on CPU1 [ 0.024994] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000 [ 0.025017] GICv3: CPU1: using allocated LPI pending table @0x0000000000470000 [ 0.025080] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.026007] Detected VIPT I-cache on CPU2 [ 0.026074] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000 [ 0.026093] GICv3: CPU2: using allocated LPI pending table @0x0000000000500000 [ 0.026135] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.027098] Detected VIPT I-cache on CPU3 [ 0.027163] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000 [ 0.027181] GICv3: CPU3: using allocated LPI pending table @0x0000000000510000 [ 0.027220] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.028108] CPU features: detected: Spectre-v2 [ 0.028123] CPU features: detected: Spectre-BHB [ 0.028132] Detected PIPT I-cache on CPU4 [ 0.028211] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000 [ 0.028230] GICv3: CPU4: using allocated LPI pending table @0x0000000000520000 [ 0.028275] CPU4: Booted secondary processor 0x0000000100 [0x410fd082] [ 0.029197] Detected PIPT I-cache on CPU5 [ 0.029263] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000 [ 0.029282] GICv3: CPU5: using allocated LPI pending table @0x0000000000530000 [ 0.029316] CPU5: Booted secondary processor 0x0000000101 [0x410fd082] [ 0.029449] smp: Brought up 1 node, 6 CPUs [ 0.042089] SMP: Total of 6 processors activated. [ 0.042531] CPU features: detected: 32-bit EL0 Support [ 0.043017] CPU features: detected: CRC32 instructions [ 0.043635] CPU: All CPU(s) started at EL2 [ 0.044036] alternatives: applying system-wide alternatives [ 0.048499] devtmpfs: initialized [ 0.062491] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.063467] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.066663] pinctrl core: initialized pinctrl subsystem [ 0.068935] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.069879] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.070881] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.072746] thermal_sys: Registered thermal governor 'fair_share' [ 0.072755] thermal_sys: Registered thermal governor 'bang_bang' [ 0.073331] thermal_sys: Registered thermal governor 'step_wise' [ 0.073905] thermal_sys: Registered thermal governor 'user_space' [ 0.074472] thermal_sys: Registered thermal governor 'power_allocator' [ 0.075258] cpuidle: using governor ladder [ 0.076568] cpuidle: using governor menu [ 0.077229] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.078052] ASID allocator initialised with 65536 entries [ 0.079490] Serial: AMBA PL011 UART driver [ 0.104440] platform ff940000.hdmi: Fixed dependency cycle(s) with /vop@ff8f0000/port/endpoint@2 [ 0.105310] platform ff940000.hdmi: Fixed dependency cycle(s) with /vop@ff900000/port/endpoint@2 [ 0.113000] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.114283] rockchip-gpio ff720000.gpio: probed /pinctrl/gpio@ff720000 [ 0.115356] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.116477] rockchip-gpio ff730000.gpio: probed /pinctrl/gpio@ff730000 [ 0.117427] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.118521] rockchip-gpio ff780000.gpio: probed /pinctrl/gpio@ff780000 [ 0.119596] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.120681] rockchip-gpio ff788000.gpio: probed /pinctrl/gpio@ff788000 [ 0.121667] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.122757] rockchip-gpio ff790000.gpio: probed /pinctrl/gpio@ff790000 [ 0.129306] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.129968] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.130562] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.131208] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.131800] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.132443] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.133035] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.133678] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.135542] cryptd: max_cpu_qlen set to 1000 [ 0.137874] iommu: Default domain type: Translated [ 0.138346] iommu: DMA domain TLB invalidation policy: strict mode [ 0.139746] SCSI subsystem initialized [ 0.140286] libata version 3.00 loaded. [ 0.140438] usbcore: registered new interface driver usbfs [ 0.141002] usbcore: registered new interface driver hub [ 0.141537] usbcore: registered new device driver usb [ 0.142449] EDAC MC: Ver: 3.0.0 [ 0.143323] scmi_core: SCMI protocol bus registered [ 0.144412] clocksource: Switched to clocksource arch_sys_counter [ 0.159026] PCI: CLS 0 bytes, default 64 [ 0.159805] Unpacking initramfs... [ 0.170742] workingset: timestamp_bits=62 max_order=20 bucket_order=0 [ 0.171485] zbud: loaded [ 0.230931] xor: measuring software checksum speed [ 0.234799] 8regs : 2904 MB/sec [ 0.238369] 32regs : 3124 MB/sec [ 0.242674] arm64_neon : 2544 MB/sec [ 0.243093] xor: using function: 32regs (3124 MB/sec) [ 0.243595] async_tx: api initialized (async) [ 0.244131] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.244850] io scheduler mq-deadline registered [ 0.245283] io scheduler kyber registered [ 0.245921] io scheduler bfq registered [ 0.269923] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 0.270664] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12 [ 0.273694] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 0.274420] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 [ 0.278343] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.281579] printk: console [ttyS2] disabled [ 0.282310] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 36, base_baud = 1500000) is a 16550A [ 0.283351] printk: console [ttyS2] enabled [ 0.284135] printk: bootconsole [uart0] disabled [ 0.335193] Freeing initrd memory: 2828K [ 0.605965] rockchip-usb2phy ff770000.syscon:usb2phy@e460: Requested PHY is disabled [ 0.606719] ehci-platform fe3c0000.usb: EHCI Host Controller [ 0.606903] rockchip-usb2phy ff770000.syscon:usb2phy@e460: Requested PHY is disabled [ 0.607501] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1 [ 0.607938] ohci-platform fe3e0000.usb: Generic Platform OHCI controller [ 0.607960] ehci-platform fe380000.usb: EHCI Host Controller [ 0.607977] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 0.607982] ohci-platform fe3a0000.usb: Generic Platform OHCI controller [ 0.608190] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 2 [ 0.608296] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 4 [ 0.608321] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 3 [ 0.608325] ehci-platform fe380000.usb: irq 45, io mem 0xfe380000 [ 0.608479] ohci-platform fe3a0000.usb: irq 47, io mem 0xfe3a0000 [ 0.608508] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002000010 [ 0.608584] xhci-hcd xhci-hcd.0.auto: irq 43, io mem 0xfe800000 [ 0.608768] ehci-platform fe3c0000.usb: irq 46, io mem 0xfe3c0000 [ 0.608818] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 0.609000] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5 [ 0.609020] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 0.609454] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 [ 0.614420] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00 [ 0.614753] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.619461] usb usb3: Product: xHCI Host Controller [ 0.619899] usb usb3: Manufacturer: Linux 6.5.1-dwc3test xhci-hcd [ 0.620454] usb usb3: SerialNumber: xhci-hcd.0.auto [ 0.621562] hub 3-0:1.0: USB hub found [ 0.621961] hub 3-0:1.0: 1 port detected [ 0.622415] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00 [ 0.623007] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.624029] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 [ 0.624791] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.625452] usb usb5: Product: xHCI Host Controller [ 0.625890] usb usb5: Manufacturer: Linux 6.5.1-dwc3test xhci-hcd [ 0.626447] usb usb5: SerialNumber: xhci-hcd.0.auto [ 0.627511] hub 5-0:1.0: USB hub found [ 0.627907] hub 5-0:1.0: 1 port detected [ 0.628986] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 0.629084] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 [ 0.629118] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 6 [ 0.629244] ohci-platform fe3e0000.usb: irq 48, io mem 0xfe3e0000 [ 0.631461] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.632104] usb usb2: Product: EHCI Host Controller [ 0.632553] usb usb2: Manufacturer: Linux 6.5.1-dwc3test ehci_hcd [ 0.633094] usb usb2: SerialNumber: fe380000.usb [ 0.634033] hub 2-0:1.0: USB hub found [ 0.634411] hub 2-0:1.0: 1 port detected [ 0.635520] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 [ 0.636263] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.636927] usb usb1: Product: EHCI Host Controller [ 0.637367] usb usb1: Manufacturer: Linux 6.5.1-dwc3test ehci_hcd [ 0.637932] usb usb1: SerialNumber: fe3c0000.usb [ 0.638971] hub 1-0:1.0: USB hub found [ 0.639369] hub 1-0:1.0: 1 port detected [ 0.640532] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7 [ 0.641413] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002000010 [ 0.642300] xhci-hcd xhci-hcd.1.auto: irq 44, io mem 0xfe900000 [ 0.643084] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 0.643836] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8 [ 0.644548] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 0.645500] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 [ 0.646240] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.646907] usb usb7: Product: xHCI Host Controller [ 0.647346] usb usb7: Manufacturer: Linux 6.5.1-dwc3test xhci-hcd [ 0.647906] usb usb7: SerialNumber: xhci-hcd.1.auto [ 0.648992] hub 7-0:1.0: USB hub found [ 0.649433] hub 7-0:1.0: 1 port detected [ 0.650405] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.651405] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 [ 0.652144] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.652811] usb usb8: Product: xHCI Host Controller [ 0.653250] usb usb8: Manufacturer: Linux 6.5.1-dwc3test xhci-hcd [ 0.653806] usb usb8: SerialNumber: xhci-hcd.1.auto [ 0.654876] hub 8-0:1.0: USB hub found [ 0.655271] hub 8-0:1.0: 1 port detected [ 0.656231] usbcore: registered new interface driver cdc_wdm [ 0.656833] usbcore: registered new interface driver usbtmc [ 0.657584] usbcore: registered new interface driver uas [ 0.658180] usbcore: registered new interface driver usb-storage [ 0.658773] usbcore: registered new interface driver ums-realtek [ 0.664839] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.05 [ 0.665096] i2c 0-001b: Fixed dependency cycle(s) with /i2c@ff3c0000/pmic@1b/regulators/LDO_REG8 [ 0.665616] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.667039] usb usb4: Product: Generic Platform OHCI controller [ 0.667582] usb usb4: Manufacturer: Linux 6.5.1-dwc3test ohci_hcd [ 0.668126] usb usb4: SerialNumber: fe3a0000.usb [ 0.669023] device-mapper: uevent: version 1.0.3 [ 0.669297] hub 4-0:1.0: USB hub found [ 0.669774] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 0.669856] hub 4-0:1.0: 1 port detected [ 0.672818] sdhci: Secure Digital Host Controller Interface driver [ 0.673370] sdhci: Copyright(c) Pierre Ossman [ 0.673996] Synopsys Designware Multimedia Card Interface Driver [ 0.675096] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.677609] ledtrig-cpu: registered to indicate activity on CPUs [ 0.685028] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.685053] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.05 [ 0.686515] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.687155] usb usb6: Product: Generic Platform OHCI controller [ 0.687697] usb usb6: Manufacturer: Linux 6.5.1-dwc3test ohci_hcd [ 0.688238] usb usb6: SerialNumber: fe3e0000.usb [ 0.689039] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 0.689463] hub 6-0:1.0: USB hub found [ 0.690160] hub 6-0:1.0: 1 port detected [ 0.697369] watchdog: Delayed init of the lockup detector failed: -19 [ 0.697968] watchdog: Hard watchdog permanently disabled [ 0.701713] zswap: loaded using pool lz4/z3fold [ 0.867444] usb 3-1: new high-speed USB device number 2 using xhci-hcd [ 1.062616] usb 3-1: New USB device found, idVendor=0411, idProduct=0111, bcdDevice= 1.00 [ 1.063371] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.064037] usb 3-1: Product: USB Flash Disk [ 1.064436] usb 3-1: Manufacturer: BUFFALO [ 1.064808] usb 3-1: SerialNumber: 07B31F089445408A [ 1.067940] usb-storage 3-1:1.0: USB Mass Storage device detected [ 1.069907] scsi host0: usb-storage 3-1:1.0 [ 1.634865] usb 8-1: new SuperSpeed USB device number 2 using xhci-hcd [ 1.651380] usb 8-1: New USB device found, idVendor=0846, idProduct=9053, bcdDevice= 1.00 [ 1.652163] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.652814] usb 8-1: Product: A6210 [ 1.653133] usb 8-1: Manufacturer: NETGEAR [ 1.653514] usb 8-1: SerialNumber: 100 [ 1.928402] rk808-regulator rk808-regulator: there is no dvs0 gpio [ 1.929003] rk808-regulator rk808-regulator: there is no dvs1 gpio [ 1.959582] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges: [ 1.960282] rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000 [ 1.960923] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode. [ 1.961073] rockchip-pcie f8000000.pcie: IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000 [ 1.961711] dwmmc_rockchip fe320000.mmc: Using internal DMA controller. [ 1.963007] dwmmc_rockchip fe320000.mmc: Version ID is 270a [ 1.963189] rockchip-pcie f8000000.pcie: no vpcie12v regulator found [ 1.963606] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 65,32 bit host data width,256 deep fifo [ 1.965433] dwmmc_rockchip fe320000.mmc: Got CD GPIO [ 1.965946] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00 [ 1.966558] pci_bus 0000:00: root bus resource [bus 00-1f] [ 1.967051] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff] [ 1.967672] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff]) [ 1.968558] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400 [ 1.969205] pci 0000:00:00.0: supports D1 [ 1.969576] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 1.974928] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.975847] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 1.976458] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid [ 1.977085] pci 0000:01:00.0: reg 0x10: [io size 0x0100] [ 1.977650] pci 0000:01:00.0: reg 0x18: [mem 0xfa004000-0xfa004fff 64bit] [ 1.978301] pci 0000:01:00.0: reg 0x20: [mem 0xfa000000-0xfa003fff 64bit] [ 1.978627] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 1.978956] pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256) [ 1.980485] pci 0000:01:00.0: Max Payload Size set to 128 (was 128, max 128) [ 1.981463] pci 0000:01:00.0: supports D1 D2 [ 1.981847] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.986549] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01 [ 1.987164] pci 0000:00:00.0: BAR 14: assigned [mem 0xfa000000-0xfa0fffff] [ 1.987807] pci 0000:01:00.0: BAR 4: assigned [mem 0xfa000000-0xfa003fff 64bit] [ 1.988514] pci 0000:01:00.0: BAR 2: assigned [mem 0xfa004000-0xfa004fff 64bit] [ 1.989200] pci 0000:01:00.0: BAR 0: no space for [io size 0x0100] [ 1.989767] pci 0000:01:00.0: BAR 0: failed to assign [io size 0x0100] [ 1.990355] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.990810] pci 0000:00:00.0: bridge window [mem 0xfa000000-0xfa0fffff] [ 1.991634] pcieport 0000:00:00.0: enabling device (0000 -> 0002) [ 1.992478] pcieport 0000:00:00.0: PME: Signaling with IRQ 70 [ 1.993350] pcieport 0000:00:00.0: AER: enabled with IRQ 70 [ 1.997069] clk: Disabling unused clocks [ 1.998377] dw-apb-uart ff1a0000.serial: forbid DMA for kernel console [ 2.000301] Freeing unused kernel memory: 2112K [ 2.035157] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 2.036599] mmc1: new high speed SDHC card at address b368 [ 2.039702] mmcblk1: mmc1:b368 USD 7.47 GiB [ 2.052557] mmcblk1: p1 [ 2.063325] Checked W+X mappings: passed, no W+X pages found [ 2.063855] rodata_test: all tests were successful [ 2.064288] Run /sbin/init as init process [ 2.064666] with arguments: [ 2.064674] /sbin/init [ 2.064681] with environment: [ 2.064687] HOME=/ [ 2.064694] TERM=linux [ 2.089057] scsi 0:0:0:0: Direct-Access BUFFALO USB Flash Disk 3.10 PQ: 0 ANSI: 0 CCS [ 2.090804] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.091915] sd 0:0:0:0: [sda] 7831552 512-byte logical blocks: (4.01 GB/3.73 GiB) [ 2.093361] sd 0:0:0:0: [sda] Write Protect is off [ 2.093374] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 [ 2.094811] sd 0:0:0:0: [sda] No Caching mode page found [ 2.095294] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 2.112099] sda: sda1 [ 2.112890] sd 0:0:0:0: [sda] Attached SCSI removable disk