[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <26c81971-70eb-ed0d-749f-6d910ad786f8@intel.com>
Date: Thu, 7 Sep 2023 11:52:40 -0700
From: Jesse Brandeburg <jesse.brandeburg@...el.com>
To: Ivan Vecera <ivecera@...hat.com>, <netdev@...r.kernel.org>
CC: Tony Nguyen <anthony.l.nguyen@...el.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>,
Catherine Sullivan <catherine.sullivan@...el.com>,
Greg Rose <gregory.v.rose@...el.com>,
"moderated list:INTEL ETHERNET DRIVERS"
<intel-wired-lan@...ts.osuosl.org>,
open list <linux-kernel@...r.kernel.org>,
Ahmed Zaki <ahmed.zaki@...el.com>,
Madhu Chittim <madhu.chittim@...el.com>
Subject: Re: [PATCH net] i40e: Fix VF VLAN offloading when port VLAN is
configured
On 9/7/2023 8:44 AM, Ivan Vecera wrote:
> If port VLAN is configured on a VF then any other VLANs on top of this VF
> are broken.
>
> During i40e_ndo_set_vf_port_vlan() call the i40e driver reset the VF and
> iavf driver asks PF (using VIRTCHNL_OP_GET_VF_RESOURCES) for VF capabilities
> but this reset occurs too early, prior setting of vf->info.pvid field
> and because this field can be zero during i40e_vc_get_vf_resources_msg()
> then VIRTCHNL_VF_OFFLOAD_VLAN capability is reported to iavf driver.
>
> This is wrong because iavf driver should not report VLAN offloading
> capability when port VLAN is configured as i40e does not support QinQ
> offloading.
>
> Fix the issue by moving VF reset after setting of vf->port_vlan_id
> field.
>
> Without this patch:
> $ echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs
> $ ip link set enp2s0f0 vf 0 vlan 3
> $ ip link set enp2s0f0v0 up
> $ ip link add link enp2s0f0v0 name vlan4 type vlan id 4
> $ ip link set vlan4 up
> ...
> $ ethtool -k enp2s0f0v0 | grep vlan-offload
> rx-vlan-offload: on
> tx-vlan-offload: on
> $ dmesg -l err | grep iavf
> [1292500.742914] iavf 0000:02:02.0: Failed to add VLAN filter, error IAVF_ERR_INVALID_QP_ID
>
> With this patch:
> $ echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs
> $ ip link set enp2s0f0 vf 0 vlan 3
> $ ip link set enp2s0f0v0 up
> $ ip link add link enp2s0f0v0 name vlan4 type vlan id 4
> $ ip link set vlan4 up
> ...
> $ ethtool -k enp2s0f0v0 | grep vlan-offload
> rx-vlan-offload: off [requested on]
> tx-vlan-offload: off [requested on]
> $ dmesg -l err | grep iavf
>
> Fixes: f9b4b6278d51ff ("i40e: Reset the VF upon conflicting VLAN configuration")
> Signed-off-by: Ivan Vecera <ivecera@...hat.com>
Change looks reasonable to me and since it fixes your reproducer above,
then excellent! Thank you!
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@...el.com>
Powered by blists - more mailing lists