| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230911172902.1057417-3-nm@ti.com>
Date: Mon, 11 Sep 2023 12:29:01 -0500
From: Nishanth Menon <nm@...com>
To: Conor Dooley <conor+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Rob Herring <robh+dt@...nel.org>, Vignesh <vigneshr@...com>
CC: <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
Tero Kristo <kristo@...nel.org>, Nishanth Menon <nm@...com>,
Tom Rini <trini@...sulko.com>, Bryan <bb@...com>,
Praneeth <praneeth@...com>, Roger Quadros <rogerq@...nel.org>
Subject: [PATCH 2/3] arm64: dts: ti: k3-am642-evm: Add boot phase tags marking
bootph-all as phase tag was added to dt-schema
(dtschema/schemas/bootph.yaml) to describe various node usage during
boot phases with DT.
Describe the same for AM642-evm boot devices.
Signed-off-by: Nishanth Menon <nm@...com>
---
arch/arm64/boot/dts/ti/k3-am642-evm.dts | 28 +++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
index b4a1f73d4fb1..d0e1191baecd 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
@@ -35,6 +35,7 @@ aliases {
};
memory@...00000 {
+ bootph-all;
device_type = "memory";
/* 2G RAM */
reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
@@ -108,6 +109,7 @@ rtos_ipc_memory_region: ipc-memories@...00000 {
evm_12v0: regulator-0 {
/* main DC jack */
+ bootph-all;
compatible = "regulator-fixed";
regulator-name = "evm_12v0";
regulator-min-microvolt = <12000000>;
@@ -129,6 +131,7 @@ vsys_5v0: regulator-1 {
vsys_3v3: regulator-2 {
/* output of LM5140 */
+ bootph-all;
compatible = "regulator-fixed";
regulator-name = "vsys_3v3";
regulator-min-microvolt = <3300000>;
@@ -140,6 +143,7 @@ vsys_3v3: regulator-2 {
vdd_mmc1: regulator-3 {
/* TPS2051BD */
+ bootph-all;
compatible = "regulator-fixed";
regulator-name = "vdd_mmc1";
regulator-min-microvolt = <3300000>;
@@ -161,6 +165,7 @@ vddb: regulator-4 {
};
vtt_supply: regulator-5 {
+ bootph-all;
compatible = "regulator-fixed";
regulator-name = "vtt";
pinctrl-names = "default";
@@ -251,6 +256,7 @@ AM64X_IOPAD(0x0244, PIN_OUTPUT, 0) /* (E14) UART1_TXD */
};
main_uart0_pins_default: main-uart0-default-pins {
+ bootph-all;
pinctrl-single,pins = <
AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */
AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */
@@ -269,6 +275,7 @@ AM64X_IOPAD(0x0218, PIN_INPUT, 0) /* (A14) SPI0_D1 */
};
main_i2c0_pins_default: main-i2c0-default-pins {
+ bootph-all;
pinctrl-single,pins = <
AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */
AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */
@@ -276,6 +283,7 @@ AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */
};
main_i2c1_pins_default: main-i2c1-default-pins {
+ bootph-all;
pinctrl-single,pins = <
AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */
AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */
@@ -283,6 +291,7 @@ AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */
};
mdio1_pins_default: mdio1-default-pins {
+ bootph-all;
pinctrl-single,pins = <
AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */
AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */
@@ -290,6 +299,7 @@ AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */
};
rgmii1_pins_default: rgmii1-default-pins {
+ bootph-all;
pinctrl-single,pins = <
AM64X_IOPAD(0x01cc, PIN_INPUT, 4) /* (W5) PRG0_PRU1_GPO7.RGMII1_RD0 */
AM64X_IOPAD(0x01d4, PIN_INPUT, 4) /* (Y5) PRG0_PRU1_GPO9.RGMII1_RD1 */
@@ -307,6 +317,7 @@ AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4) /* (U15) PRG1_PRU0_GPO9.RGMII1_TX_CTL */
};
rgmii2_pins_default: rgmii2-default-pins {
+ bootph-all;
pinctrl-single,pins = <
AM64X_IOPAD(0x0108, PIN_INPUT, 4) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */
AM64X_IOPAD(0x010c, PIN_INPUT, 4) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */
@@ -324,6 +335,7 @@ AM64X_IOPAD(0x0144, PIN_OUTPUT, 4) /* (Y11) PRG1_PRU1_GPO15.RGMII2_TX_CTL */
};
main_usb0_pins_default: main-usb0-default-pins {
+ bootph-all;
pinctrl-single,pins = <
AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */
>;
@@ -366,6 +378,7 @@ AM64X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (C17) MCAN1_TX */
};
ddr_vtt_pins_default: ddr-vtt-default-pins {
+ bootph-all;
pinctrl-single,pins = <
AM64X_IOPAD(0x0030, PIN_OUTPUT_PULLUP, 7) /* (L18) OSPI0_CSN1.GPIO0_12 */
>;
@@ -373,6 +386,7 @@ AM64X_IOPAD(0x0030, PIN_OUTPUT_PULLUP, 7) /* (L18) OSPI0_CSN1.GPIO0_12 */
};
&main_uart0 {
+ bootph-all;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_uart0_pins_default>;
@@ -387,6 +401,7 @@ &main_uart1 {
};
&main_i2c0 {
+ bootph-all;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c0_pins_default>;
@@ -400,12 +415,14 @@ eeprom@50 {
};
&main_i2c1 {
+ bootph-all;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c1_pins_default>;
clock-frequency = <400000>;
exp1: gpio@22 {
+ bootph-all;
compatible = "ti,tca6424";
reg = <0x22>;
gpio-controller;
@@ -438,6 +455,10 @@ display@3c {
};
};
+&main_gpio0 {
+ bootph-all;
+};
+
/* mcu_gpio0 is reserved for mcu firmware usage */
&mcu_gpio0 {
status = "reserved";
@@ -467,6 +488,7 @@ &sdhci0 {
&sdhci1 {
/* SD/MMC */
+ bootph-all;
vmmc-supply = <&vdd_mmc1>;
pinctrl-names = "default";
bus-width = <4>;
@@ -476,11 +498,13 @@ &sdhci1 {
};
&usbss0 {
+ bootph-all;
ti,vbus-divider;
ti,usb2-only;
};
&usb0 {
+ bootph-all;
dr_mode = "otg";
maximum-speed = "high-speed";
pinctrl-names = "default";
@@ -488,11 +512,13 @@ &usb0 {
};
&cpsw3g {
+ bootph-all;
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins_default>, <&rgmii2_pins_default>;
};
&cpsw_port1 {
+ bootph-all;
phy-mode = "rgmii-rxid";
phy-handle = <&cpsw3g_phy0>;
};
@@ -503,11 +529,13 @@ &cpsw_port2 {
};
&cpsw3g_mdio {
+ bootph-all;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mdio1_pins_default>;
cpsw3g_phy0: ethernet-phy@0 {
+ bootph-all;
reg = <0>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
--
2.40.0
Powered by blists - more mailing lists