Message-ID: <04d28fd1-f43b-467e-9edd-24da777aca43@leemhuis.info>
Date:   Mon, 11 Sep 2023 11:59:54 +0200
From:   Thorsten Leemhuis <regressions@...mhuis.info>
To:     Gwan-gyeong Mun <gwan-gyeong.mun@...el.com>,
        Bjorn Helgaas <helgaas@...nel.org>
Cc:     mika.westerberg@...ux.intel.com, bhelgaas@...gle.com,
        sathyanarayanan.kuppuswamy@...ux.intel.com,
        linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org,
        Linux kernel regressions list <regressions@...ts.linux.dev>
Subject: Re: Ask for a regression issue of vfio-pci driver with Intel DG2
 (A770) discrete graphics card from Linux 6.1

On 29.08.23 13:25, Linux regression tracking (Thorsten Leemhuis) wrote:
> Hi, Thorsten here, the Linux kernel's regression tracker. Top-posting
> for once, to make this easily accessible to everyone.
> 
> Gwan-gyeong Mun, was this regression ever addressed? Doesn't look like
> it from here, but I might have missed something.

No reply, then I assume nobody cares anymore and will stop tracking this
issue:

#regzbot inconclusive: seem nobody cares anymore

Gwan-gyeong Mun, if this is wrong and you want to see this fixed, please
speak up.

Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat)
--
Everything you wanna know about Linux kernel regression tracking:
https://linux-regtracking.leemhuis.info/about/#tldr
If I did something stupid, please tell me, as explained on that page.


> On 07.07.23 16:16, Gwan-gyeong Mun wrote:
>>
>>
>> On 7/6/23 1:01 AM, Bjorn Helgaas wrote:
>>> On Mon, Jul 03, 2023 at 01:37:42PM +0300, Gwan-gyeong Mun wrote:
>>>> Since Linux 6.2 kernel (same happens in Linux 6.4.1), loading vfio-pci
>>>> driver to a specific HW (Intel DG2 A770) target does not work properly.
>>>> (It works fine on Linux 6.1 kernel with the same HW).
>>>
>>> Thank you very much for the report!
>>>
>>> Does this problem only happen with vfio-pci?  d8d2b65a940b appeared in
>>> v6.2-rc1 (Dec 25, 2022), so I would think somebody would have used DG2
>>> on a v6.2 or newer kernel.
>>>
>> Hi Bjorn,
>>
>> Yes, the problem only occurred when I set DG2 to vfio-pci as shown below
>> in the settings [1].
>> (The reason for setting DG2 to vfio-pci is to use dg2 as a qemu pci
>> paththru device).
>> If you don't set DG2 to vfio-pci, you won't see any logs of the problem.
>>
>>
>>> Can you please collect the complete "sudo lspci -vv" output (not just
>>> the DG2 items)?  We need info about the switch ports and all the
>>> capabilities, since d8d2b65a940b has to do with switch ports, AER, and
>>> MSI.
>>>
>>> Also, please collect the complete dmesg log with v6.4.1 (which does
>>> not work) and v6.4.1 with d8d2b65a940b reverted (which should work).
>>>
>>
>> I've filed this issue with kernel bugzilla[2] and added the dmesg and
>> lspci information you asked about as attachments.
>> I've also added direct links to the relevant logs below.
>>
>> 1. complete dmesg log with v6.4.1 with d8d2b65a940b reverted.[3]
>> 2. lspci -vv with v6.4.1 with d8d2b65a940b reverted [4]
>> 3. complete dmesg log with v6.4.1 [5]
>> 4. lspci -vv with v6.4.1 [6]
>>
>> [1]
>> $ cat /etc/modprobe.d/vfio.conf
>>
>> options vfio-pci ids=8086:56a0,8086:4f90
>> softdep drm pre: vfio-pci
>>
>> [2] https://bugzilla.kernel.org/show_bug.cgi?id=217641
>> [3] https://bugzilla.kernel.org/attachment.cgi?id=304560
>> [4] https://bugzilla.kernel.org/attachment.cgi?id=304561
>> [5] https://bugzilla.kernel.org/attachment.cgi?id=304562
>> [6] https://bugzilla.kernel.org/attachment.cgi?id=304563
>>
>>
>>> I know you said that on v6.4.1 with d8d2b65a940b reverted, the system
>>> boots but there's still a problem with suspend.  I'm intentionally
>>> ignoring this problem for now.  After we figure out the boot-time
>>> problem with the DG2 being left in D3cold, we can come back to the
>>> suspend problem.
>> Yes, I understand, and I agree.
>>
>> Br,
>>
>> G.G.
>>>
>>> Bjorn
>>>
>>>> The configuration and hardware information used is described in [1].
>>>>
>>>> Starting with the Linux 6.2 kernel, the following log is output to dmesg
>>>> when a problem occurs.
>>>> ...
>>>> [ 15.049948] pcieport 0000:00:01.0: Data Link Layer Link Active not
>>>> set in
>>>> 1000 msec
>>>> [ 15.050024] pcieport 0000:01:00.0: Unable to change power state from
>>>> D3cold
>>>> to D0, device inaccessible
>>>> [ 15.051067] pcieport 0000:02:01.0: Unable to change power state from
>>>> D3cold
>>>> to D0, device inaccessible
>>>> [ 15.052141] pcieport 0000:02:04.0: Unable to change power state from
>>>> D3cold
>>>> to D0, device inaccessible
>>>> [ 17.286554] vfio-pci 0000:03:00.0: not ready 1023ms after resume;
>>>> giving up
>>>> [ 17.286553] vfio-pci 0000:04:00.0: not ready 1023ms after resume;
>>>> giving up
>>>> [ 17.286576] vfio-pci 0000:03:00.0: Unable to change power state from
>>>> D3cold
>>>> to D0, device inaccessible
>>>> [ 17.286578] vfio-pci 0000:04:00.0: Unable to change power state from
>>>> D3cold
>>>> to D0, device inaccessible
>>>> ...
>>>>
>>>> And if you check the DG2 hardware using the "lspci -nnv" command, you
>>>> will
>>>> see that "Flags:" is displayed as "!!! Unknown header type 7f" as shown
>>>> below. [2]
>>>> The normal output log looks like [3].
>>>>
>>>> This issue has been occurring since the patch below was applied. [4]
>>>>
>>>> d8d2b65a940bb497749d66bdab59b530901d3854 is the first bad commit
>>>> commit d8d2b65a940bb497749d66bdab59b530901d3854
>>>> Author: Bjorn Helgaas <bhelgaas@...gle.com>
>>>> Date:   Fri Dec 9 11:01:00 2022 -0600
>>>>
>>>>      PCI/portdrv: Allow AER service only for Root Ports & RCECs
>>>>
>>>>
>>>> Rolling back the [4] patch makes it work on boot with the latest
>>>> version of
>>>> the kernel, but the same problem still occurs after "suspend to s2idle".
>>>> This problem existed even before applying [4].
>>>>
>>>> Suspend has been tested with the following command.
>>>> $ systemctl suspend -i
>>>>
>>>> $ cat /sys/power/mem_sleep
>>>> [s2idle] deep
>>>>
>>>>
>>>> Here is the log that is issued when testing suspend to s2idle. [5]
>>>>
>>>>
>>>> Br,
>>>>
>>>> G.G.
>>>>
>>>>
>>>> [1] Env:
>>>>
>>>> NUC: intel-nuc-13-extreme-kit-nuc13rngi7
>>>> (https://ark.intel.com/content/www/us/en/ark/products/229784/intel-nuc-13-extreme-kit-nuc13rngi7.html)
>>>> (MB: Z690, CPU: RPL-S i13700k)
>>>>
>>>> PCIE Card: Intel A770 GPU
>>>>
>>>> Add boot parameter: intel_iommu=on iommu=pt
>>>>
>>>> $ lspci -nn |grep DG2
>>>> 03:00.0 VGA compatible controller [0300]: Intel Corporation DG2 [Arc
>>>> A770]
>>>> [8086:56a0] (rev 08)
>>>> 04:00.0 Audio device [0403]: Intel Corporation DG2 Audio Controller
>>>> [8086:4f90]
>>>>
>>>>
>>>> $ cat /etc/modprobe.d/vfio.conf
>>>>
>>>> options vfio-pci ids=8086:56a0,8086:4f90
>>>> softdep drm pre: vfio-pci
>>>>
>>>> [2]
>>>> 03:00.0 VGA compatible controller [0300]: Intel Corporation DG2 [Arc
>>>> A770]
>>>> [8086:56a0] (rev 08) (prog-if 00 [VGA controller])
>>>>     Subsystem: Intel Corporation Device [8086:1020]
>>>>     !!! Unknown header type 7f
>>>>     Memory at 93000000 (64-bit, non-prefetchable) [size=16M]
>>>>     Memory at 6000000000 (64-bit, prefetchable) [size=16G]
>>>>     Expansion ROM at 94000000 [disabled] [size=2M]
>>>>     Kernel driver in use: vfio-pci
>>>>     Kernel modules: i915
>>>>
>>>> 04:00.0 Audio device [0403]: Intel Corporation DG2 Audio Controller
>>>> [8086:4f90]
>>>>     Subsystem: Intel Corporation Device [8086:1020]
>>>>     !!! Unknown header type 7f
>>>>     Memory at 94300000 (64-bit, non-prefetchable) [size=16K]
>>>>     Kernel driver in use: vfio-pci
>>>>     Kernel modules: snd_hda_intel
>>>>
>>>>
>>>> [3]
>>>> 03:00.0 VGA compatible controller [0300]: Intel Corporation DG2 [Arc
>>>> A770]
>>>> [8086:56a0] (rev 08) (prog-if 00 [VGA controller])
>>>>     Subsystem: Intel Corporation Device [8086:1020]
>>>>     Flags: bus master, fast devsel, latency 0, IOMMU group 19
>>>>     Memory at 93000000 (64-bit, non-prefetchable) [size=16M]
>>>>     Memory at 6000000000 (64-bit, prefetchable) [size=16G]
>>>>     Expansion ROM at 94000000 [disabled] [size=2M]
>>>>     Capabilities: <access denied>
>>>>     Kernel driver in use: vfio-pci
>>>>     Kernel modules: i915
>>>>
>>>> 04:00.0 Audio device [0403]: Intel Corporation DG2 Audio Controller
>>>> [8086:4f90]
>>>>     Subsystem: Intel Corporation Device [8086:1020]
>>>>     Flags: fast devsel, IOMMU group 20
>>>>     Memory at 94300000 (64-bit, non-prefetchable) [disabled] [size=16K]
>>>>     Capabilities: <access denied>
>>>>     Kernel driver in use: vfio-pci
>>>>     Kernel modules: snd_hda_intel
>>>>
>>>>
>>>> [4]
>>>> commit d8d2b65a940bb497749d66bdab59b530901d3854
>>>> Author: Bjorn Helgaas <bhelgaas@...gle.com>
>>>> Date:   Fri Dec 9 11:01:00 2022 -0600
>>>>
>>>>      PCI/portdrv: Allow AER service only for Root Ports & RCECs
>>>>
>>>>      Previously portdrv allowed the AER service for any device with
>>>> an AER
>>>>      capability (assuming Linux had control of AER) even though the AER
>>>> service
>>>>      driver only attaches to Root Port and RCECs.
>>>>
>>>>      Because get_port_device_capability() included AER for non-RP,
>>>> non-RCEC
>>>>      devices, we tried to initialize the AER IRQ even though these
>>>> devices
>>>>      don't generate AER interrupts.
>>>>
>>>>      Intel DG1 and DG2 discrete graphics cards contain a switch
>>>> leading to a
>>>>      GPU.  The switch supports AER but not MSI, so initializing an
>>>> AER IRQ
>>>>      failed, and portdrv failed to claim the switch port at all.  The
>>>> GPU
>>>> itself
>>>>      could be suspended, but the switch could not be put in a
>>>> low-power state
>>>>      because it had no driver.
>>>>
>>>>      Don't allow the AER service on non-Root Port, non-Root Complex
>>>> Event
>>>>      Collector devices.  This means we won't enable Bus Mastering if the
>>>> device
>>>>      doesn't require MSI, the AER service will not appear in sysfs,
>>>> and the
>>>> AER
>>>>      service driver will not bind to the device.
>>>>
>>>>      Link:
>>>> https://lore.kernel.org/r/20221207084105.84947-1-mika.westerberg@linux.intel.com
>>>>      Link:
>>>> https://lore.kernel.org/r/20221210002922.1749403-1-helgaas@kernel.org
>>>>      Based-on-patch-by: Mika Westerberg
>>>> <mika.westerberg@...ux.intel.com>
>>>>      Signed-off-by: Bjorn Helgaas <bhelgaas@...gle.com>
>>>>      Reviewed-by: Kuppuswamy Sathyanarayanan
>>>> <sathyanarayanan.kuppuswamy@...ux.intel.com>
>>>>
>>>> diff --git a/drivers/pci/pcie/portdrv.c b/drivers/pci/pcie/portdrv.c
>>>> index a6c4225505d5..8b16e96ec15c 100644
>>>> --- a/drivers/pci/pcie/portdrv.c
>>>> +++ b/drivers/pci/pcie/portdrv.c
>>>> @@ -232,7 +232,9 @@ static int get_port_device_capability(struct pci_dev
>>>> *dev)
>>>>          }
>>>>
>>>>   #ifdef CONFIG_PCIEAER
>>>> -       if (dev->aer_cap && pci_aer_available() &&
>>>> +       if ((pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT ||
>>>> +             pci_pcie_type(dev) == PCI_EXP_TYPE_RC_EC) &&
>>>> +           dev->aer_cap && pci_aer_available() &&
>>>>              (pcie_ports_native || host->native_aer))
>>>>                  services |= PCIE_PORT_SERVICE_AER;
>>>>   #endif
>>>>
>>>>
>>>> [5]
>>>> [   71.995824] PM: suspend entry (s2idle)
>>>> [   72.000793] Filesystems sync: 0.004 seconds
>>>> [   72.153926] Freezing user space processes
>>>> [   72.156234] Freezing user space processes completed (elapsed 0.002
>>>> seconds)
>>>> [   72.156244] OOM killer disabled.
>>>> [   72.156246] Freezing remaining freezable tasks
>>>> [   72.157616] Freezing remaining freezable tasks completed (elapsed
>>>> 0.001
>>>> seconds)
>>>> [   72.157619] printk: Suspending console(s) (use no_console_suspend to
>>>> debug)
>>>> [   73.756457] ACPI: EC: interrupt blocked
>>>> [   75.103988] ucsi_acpi USBC000:00: ucsi_handle_connector_change:
>>>> GET_CONNECTOR_STATUS failed (-5)
>>>> [   84.052478] ACPI: EC: interrupt unblocked
>>>> [   86.085388] pcieport 0000:00:01.0: Data Link Layer Link Active not
>>>> set in
>>>> 1000 msec
>>>> [   86.085523] pcieport 0000:01:00.0: Unable to change power state from
>>>> D3cold to D0, device inaccessible
>>>> [   86.086984] pci 0000:02:01.0: Unable to change power state from
>>>> D3cold to
>>>> D0, device inaccessible
>>>> [   86.087005] pci 0000:02:04.0: Unable to change power state from
>>>> D3cold to
>>>> D0, device inaccessible
>>>> [   88.335403] vfio-pci 0000:04:00.0: not ready 1023ms after resume;
>>>> waiting
>>>> [   88.335427] vfio-pci 0000:03:00.0: not ready 1023ms after resume;
>>>> waiting
>>>> [   89.375444] vfio-pci 0000:04:00.0: not ready 2047ms after resume;
>>>> waiting
>>>> [   89.375471] vfio-pci 0000:03:00.0: not ready 2047ms after resume;
>>>> waiting
>>>> [   91.615418] vfio-pci 0000:04:00.0: not ready 4095ms after resume;
>>>> waiting
>>>> [   91.615439] vfio-pci 0000:03:00.0: not ready 4095ms after resume;
>>>> waiting
>>>> [   95.882059] vfio-pci 0000:04:00.0: not ready 8191ms after resume;
>>>> waiting
>>>> [   95.882081] vfio-pci 0000:03:00.0: not ready 8191ms after resume;
>>>> waiting
>>>> [  104.202062] vfio-pci 0000:04:00.0: not ready 16383ms after resume;
>>>> waiting
>>>> [  104.202066] vfio-pci 0000:03:00.0: not ready 16383ms after resume;
>>>> waiting
>>>> [  121.482058] vfio-pci 0000:04:00.0: not ready 32767ms after resume;
>>>> waiting
>>>> [  121.482067] vfio-pci 0000:03:00.0: not ready 32767ms after resume;
>>>> waiting
>>>> [  155.615409] vfio-pci 0000:04:00.0: not ready 65535ms after resume;
>>>> giving
>>>> up
>>>> [  155.615412] vfio-pci 0000:03:00.0: not ready 65535ms after resume;
>>>> giving
>>>> up
>>>> [  155.633757] i915 0000:00:02.0: [drm] GT0: GuC firmware
>>>> i915/tgl_guc_70.bin version 70.5.1
>>>> [  155.633761] i915 0000:00:02.0: [drm] GT0: HuC firmware
>>>> i915/tgl_huc.bin
>>>> version 7.9.3
>>>> [  155.636177] i915 0000:00:02.0: [drm] GT0: HuC: authenticated!
>>>> [  155.636860] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled
>>>> [  155.636860] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled
>>>> [  155.637228] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled
>>>> [  155.661583] nvme nvme0: Shutdown timeout set to 10 seconds
>>>> [  155.663188] nvme nvme0: 24/0/0 default/read/poll queues
>>>> [  155.674267] iwlwifi 0000:00:14.3: WRT: Invalid buffer destination
>>>> [  155.823379] ucsi_acpi USBC000:00: possible UCSI driver bug 1
>>>> [  155.823390] ucsi_acpi USBC000:00: failed to re-enable
>>>> notifications (-22)
>>>> [  155.833326] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x1f
>>>> [  155.833358] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x0
>>>> [  155.833367] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90
>>>> [  155.833377] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x960
>>>> [  155.942363] ata6: SATA link down (SStatus 4 SControl 300)
>>>> [  155.942537] ata5: SATA link down (SStatus 4 SControl 300)
>>>> [  156.030241] mei_hdcp
>>>> 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04:
>>>> bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
>>>> [  156.030830] OOM killer enabled.
>>>> [  156.030831] Restarting tasks ...
>>>> [  156.030894] mei_pxp
>>>> 0000:00:16.0-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1:
>>>> bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915])
>>>> [  156.031827] done.
>>>> [  156.031837] random: crng reseeded on system resumption
>>>> [  156.036058] PM: suspend exit
>>>> [  158.962881] wlp0s20f3: authenticate with 4c:ed:fb:a0:7f:6c
>>>> [  158.966647] wlp0s20f3: send auth to 4c:ed:fb:a0:7f:6c (try 1/3)
>>>> [  159.001337] wlp0s20f3: authenticated
>>>> [  159.001858] wlp0s20f3: associate with 4c:ed:fb:a0:7f:6c (try 1/3)
>>>> [  159.002882] wlp0s20f3: RX AssocResp from 4c:ed:fb:a0:7f:6c
>>>> (capab=0x11
>>>> status=0 aid=1)
>>>> [  159.010807] wlp0s20f3: associated
>>>> [  159.159528] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes
>>>> ready
>>>> [  287.875205] vfio-pci 0000:04:00.0: Unable to change power state from
>>>> D3cold to D0, device inaccessible
>>>> [  287.936500] vfio-pci 0000:04:00.0: Unable to change power state from
>>>> D3cold to D0, device inaccessible
>>>> [  289.414087] vfio-pci 0000:03:00.0: Unable to change power state from
>>>> D3cold to D0, device inaccessible
>>>> [  289.475297] vfio-pci 0000:03:00.0: Unable to change power state from
>>>> D3cold to D0, device inaccessible

Powered by blists - more mailing lists