linux-kernel - [PATCH net-next v2 1/2] dt-bindings: net: Add documentation for Half duplex support.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20230911060200.2164771-2-danishanwar@ti.com>
Date:   Mon, 11 Sep 2023 11:31:59 +0530
From:   MD Danish Anwar <danishanwar@...com>
To:     Andrew Lunn <andrew@...n.ch>, Roger Quadros <rogerq@...com>,
        MD Danish Anwar <danishanwar@...com>,
        Conor Dooley <conor+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Eric Dumazet <edumazet@...gle.com>,
        "David S. Miller" <davem@...emloft.net>,
        Vignesh Raghavendra <vigneshr@...com>,
        Simon Horman <horms@...nel.org>
CC:     <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <netdev@...r.kernel.org>, <srk@...com>, <r-gunasekaran@...com>,
        Roger Quadros <rogerq@...nel.org>
Subject: [PATCH net-next v2 1/2] dt-bindings: net: Add documentation for Half duplex support.

In order to support half-duplex operation at 10M and 100M link speeds, the
PHY collision detection signal (COL) should be routed to ICSSG
GPIO pin (PRGx_PRU0/1_GPI10) so that firmware can detect collision signal
and apply the CSMA/CD algorithm applicable for half duplex operation. A DT
property, "ti,half-duplex-capable" is introduced for this purpose. If
board has PHY COL pin conencted to PRGx_PRU1_GPIO10, this DT property can
be added to eth node of ICSSG, MII port to support half duplex operation at
that port.

Reviewed-by: Roger Quadros <rogerq@...nel.org>
Signed-off-by: MD Danish Anwar <danishanwar@...com>
---
 Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml
index 311c570165f9..bba17d4d5874 100644
--- a/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml
+++ b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml
@@ -106,6 +106,13 @@ properties:
               phandle to system controller node and register offset
               to ICSSG control register for RGMII transmit delay
 
+          ti,half-duplex-capable:
+            type: boolean
+            description:
+              Enable half duplex operation on ICSSG MII port. This requires
+              PHY output pin (COL) to be routed to ICSSG GPIO pin
+              (PRGx_PRU0/1_GPIO10) as input.
+
         required:
           - reg
     anyOf:
-- 
2.34.1