lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list] 
Message-ID: <08d7c57b71df47aeb1f8c2ece725e22f@realtek.com>
Date:   Mon, 11 Sep 2023 01:53:17 +0000
From:   Stanley Chang[昌育德] <stanley_chang@...ltek.com>
To:     Stanley Chang[昌育德] <stanley_chang@...ltek.com>,
        Thinh Nguyen <Thinh.Nguyen@...opsys.com>
CC:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Felipe Balbi <balbi@...nel.org>,
        "linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH v2 RESEND 1/2] usb: dwc3: core: configure TX/RX threshold for DWC3_IP

Hi Thinh,

Can you help review this patch?

Thanks,
Stanley

> -----Original Message-----
> From: Stanley Chang <stanley_chang@...ltek.com>
> Sent: Monday, August 28, 2023 1:52 PM
> To: Thinh Nguyen <Thinh.Nguyen@...opsys.com>
> Cc: Stanley Chang[昌育德] <stanley_chang@...ltek.com>; Greg
> Kroah-Hartman <gregkh@...uxfoundation.org>; Rob Herring
> <robh+dt@...nel.org>; Krzysztof Kozlowski
> <krzysztof.kozlowski+dt@...aro.org>; Conor Dooley <conor+dt@...nel.org>;
> Felipe Balbi <balbi@...nel.org>; linux-usb@...r.kernel.org;
> devicetree@...r.kernel.org; linux-kernel@...r.kernel.org
> Subject: [PATCH v2 RESEND 1/2] usb: dwc3: core: configure TX/RX threshold for
> DWC3_IP
> 
> In Synopsys's dwc3 data book:
> To avoid underrun and overrun during the burst, in a high-latency bus system
> (like USB), threshold and burst size control is provided through GTXTHRCFG and
> GRXTHRCFG registers.
> 
> In Realtek DHC SoC, DWC3 USB 3.0 uses AHB system bus. When dwc3 is
> connected with USB 2.5G Ethernet, there will be overrun problem.
> Therefore, setting TX/RX thresholds can avoid this issue.
> 
> Signed-off-by: Stanley Chang <stanley_chang@...ltek.com>
> ---
> v1 to v2 change:
>     Add the properties for TX/RX threshold setting
> ---
>  drivers/usb/dwc3/core.c | 51
> +++++++++++++++++++++++++++++++++++++++++
>  drivers/usb/dwc3/core.h | 13 +++++++++++
>  2 files changed, 64 insertions(+)
> 
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index
> 9c6bf054f15d..1f74a53816c3 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -1246,6 +1246,39 @@ static int dwc3_core_init(struct dwc3 *dwc)
>  		}
>  	}
> 
> +	if (DWC3_IP_IS(DWC3)) {
> +		u8 rx_thr_num = dwc->rx_thr_num_pkt;
> +		u8 rx_maxburst = dwc->rx_max_burst;
> +		u8 tx_thr_num = dwc->tx_thr_num_pkt;
> +		u8 tx_maxburst = dwc->tx_max_burst;
> +
> +		if (rx_thr_num && rx_maxburst) {
> +			reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG);
> +			reg |= DWC3_GRXTHRCFG_PKTCNTSEL;
> +
> +			reg &= ~DWC3_GRXTHRCFG_RXPKTCNT(~0);
> +			reg |= DWC3_GRXTHRCFG_RXPKTCNT(rx_thr_num);
> +
> +			reg &= ~DWC3_GRXTHRCFG_MAXRXBURSTSIZE(~0);
> +			reg |= DWC3_GRXTHRCFG_MAXRXBURSTSIZE(rx_maxburst);
> +
> +			dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg);
> +		}
> +
> +		if (tx_thr_num && tx_maxburst) {
> +			reg = dwc3_readl(dwc->regs, DWC3_GTXTHRCFG);
> +			reg |= DWC3_GTXTHRCFG_PKTCNTSEL;
> +
> +			reg &= ~DWC3_GTXTHRCFG_TXPKTCNT(~0);
> +			reg |= DWC3_GTXTHRCFG_TXPKTCNT(tx_thr_num);
> +
> +			reg &= ~DWC3_GTXTHRCFG_MAXTXBURSTSIZE(~0);
> +			reg |= DWC3_GTXTHRCFG_MAXTXBURSTSIZE(tx_maxburst);
> +
> +			dwc3_writel(dwc->regs, DWC3_GTXTHRCFG, reg);
> +		}
> +	}
> +
>  	return 0;
> 
>  err_power_off_phy:
> @@ -1380,6 +1413,10 @@ static void dwc3_get_properties(struct dwc3 *dwc)
>  	u8			lpm_nyet_threshold;
>  	u8			tx_de_emphasis;
>  	u8			hird_threshold;
> +	u8			rx_thr_num_pkt = 0;
> +	u8			rx_max_burst = 0;
> +	u8			tx_thr_num_pkt = 0;
> +	u8			tx_max_burst = 0;
>  	u8			rx_thr_num_pkt_prd = 0;
>  	u8			rx_max_burst_prd = 0;
>  	u8			tx_thr_num_pkt_prd = 0;
> @@ -1442,6 +1479,14 @@ static void dwc3_get_properties(struct dwc3 *dwc)
>  				"snps,usb2-lpm-disable");
>  	dwc->usb2_gadget_lpm_disable = device_property_read_bool(dev,
>  				"snps,usb2-gadget-lpm-disable");
> +	device_property_read_u8(dev, "snps,rx-thr-num-pkt",
> +				&rx_thr_num_pkt);
> +	device_property_read_u8(dev, "snps,rx-max-burst",
> +				&rx_max_burst);
> +	device_property_read_u8(dev, "snps,tx-thr-num-pkt",
> +				&tx_thr_num_pkt);
> +	device_property_read_u8(dev, "snps,tx-max-burst",
> +				&tx_max_burst);
>  	device_property_read_u8(dev, "snps,rx-thr-num-pkt-prd",
>  				&rx_thr_num_pkt_prd);
>  	device_property_read_u8(dev, "snps,rx-max-burst-prd", @@ -1523,6
> +1568,12 @@ static void dwc3_get_properties(struct dwc3 *dwc)
> 
>  	dwc->hird_threshold = hird_threshold;
> 
> +	dwc->rx_thr_num_pkt = rx_thr_num_pkt;
> +	dwc->rx_max_burst = rx_max_burst;
> +
> +	dwc->tx_thr_num_pkt = tx_thr_num_pkt;
> +	dwc->tx_max_burst = tx_max_burst;
> +
>  	dwc->rx_thr_num_pkt_prd = rx_thr_num_pkt_prd;
>  	dwc->rx_max_burst_prd = rx_max_burst_prd;
> 
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index
> a69ac67d89fe..6782ec8bfd64 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -211,6 +211,11 @@
>  #define DWC3_GRXTHRCFG_RXPKTCNT(n) (((n) & 0xf) << 24)  #define
> DWC3_GRXTHRCFG_PKTCNTSEL BIT(29)
> 
> +/* Global TX Threshold Configuration Register */ #define
> +DWC3_GTXTHRCFG_MAXTXBURSTSIZE(n) (((n) & 0xff) << 16) #define
> +DWC3_GTXTHRCFG_TXPKTCNT(n) (((n) & 0xf) << 24) #define
> +DWC3_GTXTHRCFG_PKTCNTSEL BIT(29)
> +
>  /* Global RX Threshold Configuration Register for DWC_usb31 only */
>  #define DWC31_GRXTHRCFG_MAXRXBURSTSIZE(n)	(((n) & 0x1f) << 16)
>  #define DWC31_GRXTHRCFG_RXPKTCNT(n)		(((n) & 0x1f) << 21)
> @@ -1045,6 +1050,10 @@ struct dwc3_scratchpad_array {
>   * @test_mode_nr: test feature selector
>   * @lpm_nyet_threshold: LPM NYET response threshold
>   * @hird_threshold: HIRD threshold
> + * @rx_thr_num_pkt: USB receive packet count
> + * @rx_max_burst: max USB receive burst size
> + * @tx_thr_num_pkt: USB transmit packet count
> + * @tx_max_burst: max USB transmit burst size
>   * @rx_thr_num_pkt_prd: periodic ESS receive packet count
>   * @rx_max_burst_prd: max periodic ESS receive burst size
>   * @tx_thr_num_pkt_prd: periodic ESS transmit packet count @@ -1273,6
> +1282,10 @@ struct dwc3 {
>  	u8			test_mode_nr;
>  	u8			lpm_nyet_threshold;
>  	u8			hird_threshold;
> +	u8			rx_thr_num_pkt;
> +	u8			rx_max_burst;
> +	u8			tx_thr_num_pkt;
> +	u8			tx_max_burst;
>  	u8			rx_thr_num_pkt_prd;
>  	u8			rx_max_burst_prd;
>  	u8			tx_thr_num_pkt_prd;
> --
> 2.34.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ