lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <f9ae1701-cc9e-e2c4-3678-8881e4f33615@huawei.com>
Date:   Mon, 11 Sep 2023 21:17:04 +0800
From:   "Ziyang Xuan (William)" <william.xuanziyang@...wei.com>
To:     Parthiban Veerasooran <Parthiban.Veerasooran@...rochip.com>,
        <davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
        <pabeni@...hat.com>, <robh+dt@...nel.org>,
        <krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
        <corbet@....net>, <steen.hegelund@...rochip.com>,
        <rdunlap@...radead.org>, <horms@...nel.org>,
        <casper.casan@...il.com>, <andrew@...n.ch>
CC:     <netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <linux-doc@...r.kernel.org>,
        <horatiu.vultur@...rochip.com>, <Woojung.Huh@...rochip.com>,
        <Nicolas.Ferre@...rochip.com>, <UNGLinuxDriver@...rochip.com>,
        <Thorsten.Kummermehr@...rochip.com>
Subject: Re: [RFC PATCH net-next 5/6] microchip: lan865x: add driver support
 for Microchip's LAN865X MACPHY

> The LAN8650/1 is designed to conform to the OPEN Alliance 10BASE‑T1x
> MAC‑PHY Serial Interface specification, Version 1.1. The IEEE Clause 4
> MAC integration provides the low pin count standard SPI interface to any
> microcontroller therefore providing Ethernet functionality without
> requiring MAC integration within the microcontroller. The LAN8650/1
> operates as an SPI client supporting SCLK clock rates up to a maximum of
> 25 MHz. This SPI interface supports the transfer of both data (Ethernet
> frames) and control (register access).
> 
> By default, the chunk data payload is 64 bytes in size. A smaller payload
> data size of 32 bytes is also supported and may be configured in the
> Chunk Payload Size (CPS) field of the Configuration 0 (OA_CONFIG0)
> register. Changing the chunk payload size requires the LAN8650/1 be reset
> and shall not be done during normal operation.
> 
> The Ethernet Media Access Controller (MAC) module implements a 10 Mbps
> half duplex Ethernet MAC, compatible with the IEEE 802.3 standard.
> 10BASE-T1S physical layer transceiver integrated into the LAN8650/1. The
> PHY and MAC are connected via an internal Media Independent Interface
> (MII).
> 
> Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@...rochip.com>
> ---
>  MAINTAINERS                              |   6 +
>  drivers/net/ethernet/microchip/Kconfig   |  10 +
>  drivers/net/ethernet/microchip/Makefile  |   3 +
>  drivers/net/ethernet/microchip/lan865x.c | 589 +++++++++++++++++++++++
>  4 files changed, 608 insertions(+)
>  create mode 100644 drivers/net/ethernet/microchip/lan865x.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index c54454c7e7a1..666c042a15b2 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -13879,6 +13879,12 @@ L:	netdev@...r.kernel.org
>  S:	Maintained
>  F:	drivers/net/ethernet/microchip/lan743x_*
>  
> +MICROCHIP LAN8650/1 10BASE-T1S MACPHY ETHERNET DRIVER
> +M:	Parthiban Veerasooran <parthiban.veerasooran@...rochip.com>
> +L:	netdev@...r.kernel.org
> +S:	Maintained
> +F:	drivers/net/ethernet/microchip/lan865x.c
> +
>  MICROCHIP LAN87xx/LAN937x T1 PHY DRIVER
>  M:	Arun Ramadoss <arun.ramadoss@...rochip.com>
>  R:	UNGLinuxDriver@...rochip.com
> diff --git a/drivers/net/ethernet/microchip/Kconfig b/drivers/net/ethernet/microchip/Kconfig
> index 329e374b9539..d99be51b99f1 100644
> --- a/drivers/net/ethernet/microchip/Kconfig
> +++ b/drivers/net/ethernet/microchip/Kconfig
> @@ -59,4 +59,14 @@ source "drivers/net/ethernet/microchip/lan966x/Kconfig"
>  source "drivers/net/ethernet/microchip/sparx5/Kconfig"
>  source "drivers/net/ethernet/microchip/vcap/Kconfig"
>  
> +config LAN865X
> +	tristate "LAN865x support"
> +	depends on SPI
> +	help
> +      	  Support for the Microchip LAN8650/1 Rev.B0 Ethernet chip. It uses OPEN
> +	  Alliance 10BASE-T1x Serial Interface specification.
> +
> +      	  To compile this driver as a module, choose M here. The module will be
> +          called lan865x.
> +
>  endif # NET_VENDOR_MICROCHIP
> diff --git a/drivers/net/ethernet/microchip/Makefile b/drivers/net/ethernet/microchip/Makefile
> index bbd349264e6f..315e850b2b26 100644
> --- a/drivers/net/ethernet/microchip/Makefile
> +++ b/drivers/net/ethernet/microchip/Makefile
> @@ -12,3 +12,6 @@ lan743x-objs := lan743x_main.o lan743x_ethtool.o lan743x_ptp.o
>  obj-$(CONFIG_LAN966X_SWITCH) += lan966x/
>  obj-$(CONFIG_SPARX5_SWITCH) += sparx5/
>  obj-$(CONFIG_VCAP) += vcap/
> +
> +obj-$(CONFIG_LAN865X) += lan865x_t1s.o
> +lan865x_t1s-objs := lan865x.o ../oa_tc6.o
> diff --git a/drivers/net/ethernet/microchip/lan865x.c b/drivers/net/ethernet/microchip/lan865x.c
> new file mode 100644
> index 000000000000..3c8ebf4c258f
> --- /dev/null
> +++ b/drivers/net/ethernet/microchip/lan865x.c
> @@ -0,0 +1,589 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Microchip's LAN865x 10BASE-T1S MAC-PHY driver
> + *
> + * Author: Parthiban Veerasooran <parthiban.veerasooran@...rochip.com>
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/etherdevice.h>
> +#include <linux/mdio.h>
> +#include <linux/phy.h>
> +#include <linux/of.h>
> +#include <linux/oa_tc6.h>
> +
> +#define DRV_NAME		"lan865x"
> +#define DRV_VERSION		"0.1"
> +
> +#define REG_STDR_RESET		0x00000003
> +#define REG_MAC_ADDR_BO		0x00010022
> +#define REG_MAC_ADDR_L		0x00010024
> +#define REG_MAC_ADDR_H		0x00010025
> +#define REG_MAC_NW_CTRL         0x00010000
> +#define REG_MAC_NW_CONFIG	0x00010001
> +#define REG_MAC_HASHL		0x00010020
> +#define REG_MAC_HASHH		0x00010021
> +#define REG_MAC_ADDR_BO		0x00010022
> +#define REG_MAC_ADDR_L		0x00010024
> +#define REG_MAC_ADDR_H		0x00010025
> +
> +#define CCS_Q0_TX_CFG		0x000A0081
> +#define CCS_Q0_RX_CFG		0x000A0082
> +
> +/* Buffer configuration for 32-bytes chunk payload */
> +#define CCS_Q0_TX_CFG_32	0x70000000
> +#define CCS_Q0_RX_CFG_32	0x30000C00
> +
> +#define NW_RX_STATUS		BIT(2)
> +#define NW_TX_STATUS		BIT(3)
> +#define NW_DISABLE		0x0
> +
> +#define MAC_PROMISCUOUS_MODE	BIT(4)
> +#define MAC_MULTICAST_MODE	BIT(6)
> +#define MAC_UNICAST_MODE	BIT(7)
> +
> +#define TX_TIMEOUT		(4 * HZ)
> +#define LAN865X_MSG_DEFAULT	\
> +	(NETIF_MSG_PROBE | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN | NETIF_MSG_LINK)
> +
> +struct lan865x_priv {
> +	struct net_device *netdev;
> +	struct spi_device *spi;
> +	struct oa_tc6 *tc6;
> +	struct mii_bus *mdiobus;
> +	struct phy_device *phydev;
> +	struct device *dev;
> +	u32 msg_enable;
> +	bool txcte;
> +	bool rxcte;
> +	u32 cps;
> +	bool protected;
> +};
> +
> +static void lan865x_handle_link_change(struct net_device *netdev)
> +{
> +	struct lan865x_priv *priv = netdev_priv(netdev);
> +
> +	phy_print_status(priv->phydev);
> +}
> +
> +static int lan865x_mdiobus_read(struct mii_bus *bus, int phy_id, int idx)
> +{
> +	struct lan865x_priv *priv = bus->priv;
> +	u32 regval;
> +	bool ret;
> +
> +	ret = oa_tc6_read_register(priv->tc6, 0xFF00 | (idx & 0xFF), &regval, 1);
> +	if (ret)
> +		return -ENODEV;
> +
> +	return regval;
> +}
> +
> +static int lan865x_mdiobus_write(struct mii_bus *bus, int phy_id, int idx,
> +				 u16 regval)
> +{
> +	struct lan865x_priv *priv = bus->priv;
> +	u32 value = regval;
> +	bool ret;
> +
> +	ret = oa_tc6_write_register(priv->tc6, 0xFF00 | (idx & 0xFF), &value, 1);
> +	if (ret)
> +		return -ENODEV;
> +
> +	return 0;
> +}
> +
> +static int lan865x_phy_init(struct lan865x_priv *priv)
> +{
> +	int ret;
> +
> +	priv->mdiobus = mdiobus_alloc();
> +	if (!priv->mdiobus) {
> +		netdev_err(priv->netdev, "MDIO bus alloc failed\n");
> +		return -ENODEV;
> +	}
> +
> +	priv->mdiobus->phy_mask = ~(u32)BIT(1);
> +	priv->mdiobus->priv = priv;
> +	priv->mdiobus->read = lan865x_mdiobus_read;
> +	priv->mdiobus->write = lan865x_mdiobus_write;
> +	priv->mdiobus->name = "lan865x-mdiobus";
> +	priv->mdiobus->parent = priv->dev;
> +
> +	snprintf(priv->mdiobus->id, ARRAY_SIZE(priv->mdiobus->id),
> +		 "%s", dev_name(&priv->spi->dev));
> +
> +	ret = mdiobus_register(priv->mdiobus);
> +	if (ret) {
> +		netdev_err(priv->netdev, "Could not register MDIO bus\n");
> +		mdiobus_free(priv->mdiobus);
> +		return ret;
> +	}
> +	priv->phydev = phy_find_first(priv->mdiobus);
> +	if (!priv->phydev) {
> +		netdev_err(priv->netdev, "No PHY found\n");
> +		mdiobus_unregister(priv->mdiobus);
> +		mdiobus_free(priv->mdiobus);
> +		return -ENODEV;
> +	}
> +	priv->phydev->is_internal = true;
> +	ret = phy_connect_direct(priv->netdev, priv->phydev,
> +				 &lan865x_handle_link_change,
> +				 PHY_INTERFACE_MODE_INTERNAL);
> +	if (ret) {
> +		netdev_err(priv->netdev, "Can't attach PHY to %s\n", priv->mdiobus->id);
> +		return ret;
Here return directly without above resources recycle. Please check if it is correct.
If it is needed, it is recommended to use error labels to avoid duplicate code.

> +	}
> +	phy_attached_info(priv->phydev);
> +	return ret;
> +}
> +
> +static int lan865x_set_hw_macaddr(struct net_device *netdev)
> +{
> +	u32 regval;
> +	bool ret;
> +	struct lan865x_priv *priv = netdev_priv(netdev);
> +	const u8 *mac = netdev->dev_addr;
> +
> +	ret = oa_tc6_read_register(priv->tc6, REG_MAC_NW_CTRL, &regval, 1);
> +	if (ret)
> +		goto error_mac;
> +	if ((regval & NW_TX_STATUS) | (regval & NW_RX_STATUS)) {
> +		if (netif_msg_drv(priv))
> +			netdev_warn(netdev, "Hardware must be disabled for MAC setting\n");
> +		return -EBUSY;
> +	}
> +	/* MAC address setting */
> +	regval = (mac[3] << 24) | (mac[2] << 16) | (mac[1] << 8) |
> +		mac[0];
> +	ret = oa_tc6_write_register(priv->tc6, REG_MAC_ADDR_L, &regval, 1);
> +	if (ret)
> +		goto error_mac;
> +
> +	regval = (mac[5] << 8) | mac[4];
> +	ret = oa_tc6_write_register(priv->tc6, REG_MAC_ADDR_H, &regval, 1);
> +	if (ret)
> +		goto error_mac;
> +
> +	regval = (mac[5] << 24) | (mac[4] << 16) |
> +		(mac[3] << 8) | mac[2];
> +	ret = oa_tc6_write_register(priv->tc6, REG_MAC_ADDR_BO, &regval, 1);
> +	if (ret)
> +		goto error_mac;
> +
> +	return 0;
> +
> +error_mac:
> +	return -ENODEV;

No resource recycle, goto and error label are not needed. What's more,
the same label corresponds to different errors.

> +}
> +
> +static int
> +lan865x_set_link_ksettings(struct net_device *netdev,
> +			   const struct ethtool_link_ksettings *cmd)
> +{
> +	struct lan865x_priv *priv = netdev_priv(netdev);
> +	int ret = 0;
> +
> +	if (cmd->base.autoneg != AUTONEG_DISABLE ||
> +	    cmd->base.speed != SPEED_10 || cmd->base.duplex != DUPLEX_HALF) {
> +		if (netif_msg_link(priv))
> +			netdev_warn(netdev, "Unsupported link setting");
> +		ret = -EOPNOTSUPP;
> +	} else {
> +		if (netif_msg_link(priv))
> +			netdev_warn(netdev, "Hardware must be disabled to set link mode");
> +		ret = -EBUSY;
> +	}
> +	return ret;
> +}
> +
> +static int
> +lan865x_get_link_ksettings(struct net_device *netdev,
> +			   struct ethtool_link_ksettings *cmd)
> +{
> +	ethtool_link_ksettings_zero_link_mode(cmd, supported);
> +	ethtool_link_ksettings_add_link_mode(cmd, supported, 10baseT_Half);
> +	ethtool_link_ksettings_add_link_mode(cmd, supported, TP);
> +
> +	cmd->base.speed = SPEED_10;
> +	cmd->base.duplex = DUPLEX_HALF;
> +	cmd->base.port	= PORT_TP;
> +	cmd->base.autoneg = AUTONEG_DISABLE;
> +
> +	return 0;
> +}
> +
> +static void lan865x_set_msglevel(struct net_device *netdev, u32 val)
> +{
> +	struct lan865x_priv *priv = netdev_priv(netdev);
> +
> +	priv->msg_enable = val;
> +}
> +
> +static u32 lan865x_get_msglevel(struct net_device *netdev)
> +{
> +	struct lan865x_priv *priv = netdev_priv(netdev);
> +
> +	return priv->msg_enable;
> +}
> +
> +static void
> +lan865x_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *info)
> +{
> +	strscpy(info->driver, DRV_NAME, sizeof(info->driver));
> +	strscpy(info->version, DRV_VERSION, sizeof(info->version));
> +	strscpy(info->bus_info,
> +		dev_name(netdev->dev.parent), sizeof(info->bus_info));
> +}
> +
> +static const struct ethtool_ops lan865x_ethtool_ops = {
> +	.get_drvinfo	= lan865x_get_drvinfo,
> +	.get_msglevel	= lan865x_get_msglevel,
> +	.set_msglevel	= lan865x_set_msglevel,
> +	.get_link_ksettings = lan865x_get_link_ksettings,
> +	.set_link_ksettings = lan865x_set_link_ksettings,
> +};
> +
> +static void lan865x_tx_timeout(struct net_device *netdev, unsigned int txqueue)
> +{
> +	netdev->stats.tx_errors++;
> +}
> +
> +static int lan865x_set_mac_address(struct net_device *netdev, void *addr)
> +{
> +	struct sockaddr *address = addr;
> +
> +	if (netif_running(netdev))
> +		return -EBUSY;
> +	if (!is_valid_ether_addr(address->sa_data))
> +		return -EADDRNOTAVAIL;
> +
> +	eth_hw_addr_set(netdev, address->sa_data);
> +	return lan865x_set_hw_macaddr(netdev);
> +}
> +
> +static u32 lan865x_hash(u8 addr[ETH_ALEN])
> +{
> +	return (ether_crc(ETH_ALEN, addr) >> 26) & 0x3f;
> +}
> +
> +static void lan865x_set_multicast_list(struct net_device *netdev)
> +{
> +	struct lan865x_priv *priv = netdev_priv(netdev);
> +	u32 regval = 0;
> +
> +	if (netdev->flags & IFF_PROMISC) {
> +		/* Enabling promiscuous mode */
> +		regval |= MAC_PROMISCUOUS_MODE;
> +		regval &= (~MAC_MULTICAST_MODE);
> +		regval &= (~MAC_UNICAST_MODE);
> +	} else if (netdev->flags & IFF_ALLMULTI) {
> +		/* Enabling all multicast mode */
> +		regval &= (~MAC_PROMISCUOUS_MODE);
> +		regval |= MAC_MULTICAST_MODE;
> +		regval &= (~MAC_UNICAST_MODE);
> +	} else if (!netdev_mc_empty(netdev)) {
> +		/* Enabling specific multicast addresses */
> +		struct netdev_hw_addr *ha;
> +		u32 hash_lo = 0;
> +		u32 hash_hi = 0;
> +
> +		netdev_for_each_mc_addr(ha, netdev) {
> +			u32 bit_num = lan865x_hash(ha->addr);
> +			u32 mask = 1 << (bit_num & 0x1f);
> +
> +			if (bit_num & 0x20)
> +				hash_hi |= mask;
> +			else
> +				hash_lo |= mask;
> +		}
> +		if (oa_tc6_write_register(priv->tc6, REG_MAC_HASHH, &hash_hi, 1)) {
> +			if (netif_msg_timer(priv))
> +				netdev_err(netdev, "Failed to write reg_hashh");
> +			return;
> +		}
> +		if (oa_tc6_write_register(priv->tc6, REG_MAC_HASHL, &hash_lo, 1)) {
> +			if (netif_msg_timer(priv))
> +				netdev_err(netdev, "Failed to write reg_hashl");
> +			return;
> +		}
> +		regval &= (~MAC_PROMISCUOUS_MODE);
> +		regval &= (~MAC_MULTICAST_MODE);
> +		regval |= MAC_UNICAST_MODE;
> +	} else {
> +		/* enabling local mac address only */
> +		if (oa_tc6_write_register(priv->tc6, REG_MAC_HASHH, &regval, 1)) {
> +			if (netif_msg_timer(priv))
> +				netdev_err(netdev, "Failed to write reg_hashh");
> +			return;
> +		}
> +		if (oa_tc6_write_register(priv->tc6, REG_MAC_HASHL, &regval, 1)) {
> +			if (netif_msg_timer(priv))
> +				netdev_err(netdev, "Failed to write reg_hashl");
> +			return;
> +		}
> +	}
> +	if (oa_tc6_write_register(priv->tc6, REG_MAC_NW_CONFIG, &regval, 1)) {
> +		if (netif_msg_timer(priv))
> +			netdev_err(netdev, "Failed to enable promiscuous mode");
> +	}
> +}
> +
> +static netdev_tx_t lan865x_send_packet(struct sk_buff *skb,
> +				       struct net_device *netdev)
> +{
> +	struct lan865x_priv *priv = netdev_priv(netdev);
> +
> +	return oa_tc6_send_eth_pkt(priv->tc6, skb);
> +}
> +
> +static int lan865x_hw_disable(struct lan865x_priv *priv)
> +{
> +	u32 regval = NW_DISABLE;
> +
> +	if (oa_tc6_write_register(priv->tc6, REG_MAC_NW_CTRL, &regval, 1))
> +		return -ENODEV;
> +
> +	return 0;
> +}
> +
> +static int lan865x_net_close(struct net_device *netdev)
> +{
> +	struct lan865x_priv *priv = netdev_priv(netdev);
> +	int ret;
> +
> +	netif_stop_queue(netdev);
> +	ret = lan865x_hw_disable(priv);
> +	if (ret) {
> +		if (netif_msg_ifup(priv))
> +			netdev_err(netdev, "Failed to disable the hardware\n");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int lan865x_hw_enable(struct lan865x_priv *priv)
> +{
> +	u32 regval = NW_TX_STATUS | NW_RX_STATUS;
> +
> +	if (oa_tc6_write_register(priv->tc6, REG_MAC_NW_CTRL, &regval, 1))
> +		return -ENODEV;
> +
> +	return 0;
> +}
> +
> +static int lan865x_net_open(struct net_device *netdev)
> +{
> +	struct lan865x_priv *priv = netdev_priv(netdev);
> +	int ret;
> +
> +	if (!is_valid_ether_addr(netdev->dev_addr)) {
> +		if (netif_msg_ifup(priv))
> +			netdev_err(netdev, "Invalid MAC address %pm", netdev->dev_addr);
> +		return -EADDRNOTAVAIL;
> +	}
> +	if (lan865x_hw_disable(priv)) {
> +		if (netif_msg_ifup(priv))
> +			netdev_err(netdev, "Failed to disable the hardware\n");
> +		return -ENODEV;
> +	}
> +	ret = lan865x_set_hw_macaddr(netdev);
> +	if (ret != 0)
> +		return ret;
> +
> +	if (lan865x_hw_enable(priv) != 0) {
> +		if (netif_msg_ifup(priv))
> +			netdev_err(netdev, "Failed to enable hardware\n");
> +		return -ENODEV;
> +	}
> +	netif_start_queue(netdev);
> +
> +	return 0;
> +}
> +
> +static const struct net_device_ops lan865x_netdev_ops = {
> +	.ndo_open		= lan865x_net_open,
> +	.ndo_stop		= lan865x_net_close,
> +	.ndo_start_xmit		= lan865x_send_packet,
> +	.ndo_set_rx_mode	= lan865x_set_multicast_list,
> +	.ndo_set_mac_address	= lan865x_set_mac_address,
> +	.ndo_tx_timeout		= lan865x_tx_timeout,
> +	.ndo_validate_addr	= eth_validate_addr,
> +};
> +
> +static int lan865x_get_dt_data(struct lan865x_priv *priv)
> +{
> +	struct spi_device *spi = priv->spi;
> +	int ret;
> +
> +	if (of_property_present(spi->dev.of_node, "oa-chunk-size")) {
> +		ret = of_property_read_u32(spi->dev.of_node, "oa-chunk-size",
> +					   &priv->cps);
> +		if (ret < 0)
> +			return ret;
> +	} else {
> +		priv->cps = 64;
> +		dev_info(&spi->dev, "Property oa-chunk-size is not found in dt and proceeding with the size 64\n");
> +	}
> +
> +	if (of_property_present(spi->dev.of_node, "oa-tx-cut-through"))
> +		priv->txcte = true;
> +	else
> +		dev_info(&spi->dev, "Property oa-tx-cut-through is not found in dt and proceeding with tx store and forward mode\n");
> +
> +	if (of_property_present(spi->dev.of_node, "oa-rx-cut-through"))
> +		priv->rxcte = true;
> +	else
> +		dev_info(&spi->dev, "Property oa-rx-cut-through is not found in dt and proceeding with rx store and forward mode\n");
> +
> +	if (of_property_present(spi->dev.of_node, "oa-protected"))
> +		priv->protected = true;
> +	else
> +		dev_info(&spi->dev, "Property oa-protected is not found in dt and proceeding with protection enabled\n");
> +
> +	return 0;
> +}
> +
> +static int lan865x_probe(struct spi_device *spi)
> +{
> +	struct net_device *netdev;
> +	struct lan865x_priv *priv;
> +	u32 regval;
> +	int ret;
> +
> +	netdev = alloc_etherdev(sizeof(struct lan865x_priv));
> +	if (!netdev)
> +		return -ENOMEM;
> +
> +	priv = netdev_priv(netdev);
> +	priv->netdev = netdev;
> +	priv->spi = spi;
> +	priv->msg_enable = 0;
> +	spi_set_drvdata(spi, priv);
> +	SET_NETDEV_DEV(netdev, &spi->dev);
> +
> +	ret = lan865x_get_dt_data(priv);
> +	if (ret)
> +		return ret;

Has not free allocated netdev.

> +
> +	spi->rt = true;
> +	spi_setup(spi);
> +
> +	priv->tc6 = oa_tc6_init(spi, netdev);
> +	if (!priv->tc6) {
> +		ret = -ENOMEM;
> +		goto error_oa_tc6_init;
> +	}
> +
> +	if (priv->cps == 32) {
> +		regval = CCS_Q0_TX_CFG_32;
> +		ret = oa_tc6_write_register(priv->tc6, CCS_Q0_TX_CFG, &regval, 1);
> +		if (ret)
> +			return ret;

No resources recycle. Please check.

> +
> +		regval = CCS_Q0_RX_CFG_32;
> +		ret = oa_tc6_write_register(priv->tc6, CCS_Q0_RX_CFG, &regval, 1);
> +		if (ret)
> +			return ret;

No resources recycle. Please check.

> +	}
> +
> +	if (oa_tc6_configure(priv->tc6, priv->cps, priv->protected, priv->txcte,
> +			     priv->rxcte))
> +		goto err_macphy_config;
> +
> +	ret = lan865x_phy_init(priv);
> +	if (ret)
> +		goto error_phy;
> +
> +	if (device_get_ethdev_address(&spi->dev, netdev))
> +		eth_hw_addr_random(netdev);
> +
> +	ret = lan865x_set_hw_macaddr(netdev);
> +	if (ret) {
> +		if (netif_msg_probe(priv))
> +			dev_err(&spi->dev, "Failed to configure MAC");
> +		goto error_set_mac;
> +	}
> +
> +	netdev->if_port = IF_PORT_10BASET;
> +	netdev->irq = spi->irq;
> +	netdev->netdev_ops = &lan865x_netdev_ops;
> +	netdev->watchdog_timeo = TX_TIMEOUT;
> +	netdev->ethtool_ops = &lan865x_ethtool_ops;
> +	ret = register_netdev(netdev);
> +	if (ret) {
> +		if (netif_msg_probe(priv))
> +			dev_err(&spi->dev, "Register netdev failed (ret = %d)",
> +				ret);
> +		goto error_netdev_register;
> +	}
> +
> +	phy_start(priv->phydev);
> +	return 0;
> +
> +error_netdev_register:
> +error_set_mac:
> +	phy_disconnect(priv->phydev);
> +	mdiobus_unregister(priv->mdiobus);
> +	mdiobus_free(priv->mdiobus);
> +error_phy:
> +err_macphy_config:
> +	oa_tc6_deinit(priv->tc6);
> +error_oa_tc6_init:
> +	free_netdev(priv->netdev);
> +	return ret;
> +}
> +
> +static void lan865x_remove(struct spi_device *spi)
> +{
> +	struct lan865x_priv *priv = spi_get_drvdata(spi);
> +
> +	phy_stop(priv->phydev);
> +	phy_disconnect(priv->phydev);
> +	mdiobus_unregister(priv->mdiobus);
> +	mdiobus_free(priv->mdiobus);
> +	unregister_netdev(priv->netdev);
> +	if (oa_tc6_deinit(priv->tc6))
> +		dev_err(&spi->dev, "Failed to deinitialize oa tc6\n");
> +	free_netdev(priv->netdev);
> +}
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id lan865x_dt_ids[] = {
> +	{ .compatible = "microchip,lan865x" },
> +	{ /* Sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, lan865x_dt_ids);
> +#endif
> +
> +#ifdef CONFIG_ACPI
> +static const struct acpi_device_id lan865x_acpi_ids[] = {
> +	{ .id = "LAN865X",
> +	},
> +	{},
> +};
> +MODULE_DEVICE_TABLE(acpi, lan865x_acpi_ids);
> +#endif
> +
> +static struct spi_driver lan865x_driver = {
> +	.driver = {
> +		.name = DRV_NAME,
> +#ifdef CONFIG_OF
> +		.of_match_table = lan865x_dt_ids,
> +#endif
> +#ifdef CONFIG_ACPI
> +		   .acpi_match_table = ACPI_PTR(lan865x_acpi_ids),
> +#endif
> +	 },
> +	.probe = lan865x_probe,
> +	.remove = lan865x_remove,
> +};
> +module_spi_driver(lan865x_driver);
> +
> +MODULE_DESCRIPTION(DRV_NAME " 10Base-T1S MACPHY Ethernet Driver");
> +MODULE_AUTHOR("Parthiban Veerasooran <parthiban.veerasooran@...rochip.com>");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("spi:" DRV_NAME);
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ