| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <2bc45165-2a2a-77b7-00bb-3fce567d8468@roeck-us.net>
Date: Mon, 11 Sep 2023 05:43:24 -0700
From: Guenter Roeck <linux@...ck-us.net>
To: Naresh Solanki <naresh.solanki@...ements.com>, broonie@...nel.org,
zev@...ilderbeest.net, Liam Girdwood <lgirdwood@...il.com>,
Jean Delvare <jdelvare@...e.com>
Cc: linux-kernel@...r.kernel.org, linux-hwmon@...r.kernel.org
Subject: Re: [PATCH v3] regulator (max5970): Add hwmon support
On 9/11/23 04:36, Naresh Solanki wrote:
> Utilize the integrated 10-bit ADC in Max5970/Max5978 to enable voltage
> and current monitoring. This feature is seamlessly integrated through
> the hwmon subsystem.
>
> Signed-off-by: Naresh Solanki <naresh.solanki@...ements.com>
> ---
> Changes in V3:
> - Update signed-off
> - Add break
> - Update hwmon dev register name to max5970
> - Remove changes in Kconfig.
> Changes in V2:
> - default case added for switch statement
> - Add dependency on HWMON
> ---
> drivers/regulator/max5970-regulator.c | 126 ++++++++++++++++++++++++++
> 1 file changed, 126 insertions(+)
>
> diff --git a/drivers/regulator/max5970-regulator.c b/drivers/regulator/max5970-regulator.c
> index b56a174cde3d..208de66c0928 100644
> --- a/drivers/regulator/max5970-regulator.c
> +++ b/drivers/regulator/max5970-regulator.c
> @@ -10,6 +10,7 @@
> #include <linux/bitops.h>
> #include <linux/device.h>
> #include <linux/err.h>
> +#include <linux/hwmon.h>
> #include <linux/module.h>
> #include <linux/io.h>
> #include <linux/of.h>
> @@ -32,6 +33,121 @@ enum max597x_regulator_id {
> MAX597X_SW1,
> };
>
> +static int max5970_read_adc(struct regmap *regmap, int reg, long *val)
> +{
> + u8 reg_data[2];
> + int ret;
> +
> + ret = regmap_bulk_read(regmap, reg, ®_data[0], 2);
> + if (ret < 0)
> + return ret;
> +
> + *val = (reg_data[0] << 2) | (reg_data[1] & 3);
> +
> + return 0;
> +}
> +
> +static int max5970_read(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, long *val)
> +{
> + struct max5970_data *ddata = dev_get_drvdata(dev);
> + struct regmap *regmap = dev_get_regmap(dev->parent, NULL);
> + int ret;
> +
> + switch (type) {
> + case hwmon_curr:
> + switch (attr) {
> + case hwmon_curr_input:
> + ret = max5970_read_adc(regmap, MAX5970_REG_CURRENT_H(channel), val);
> + /*
> + * Calculate current from ADC value, IRNG range & shunt resistor value.
> + * ddata->irng holds the voltage corresponding to the maximum value the
> + * 10-bit ADC can measure.
> + * To obtain the output, multiply the ADC value by the IRNG range (in
> + * millivolts) and then divide it by the maximum value of the 10-bit ADC.
> + */
> + *val = (*val * ddata->irng[channel]) >> 10;
> + /* Convert the voltage meansurement across shunt resistor to current */
> + *val = (*val * 1000) / ddata->shunt_micro_ohms[channel];
> + return ret;
> + default:
> + return -EOPNOTSUPP;
> + }
> +
> + case hwmon_in:
> + switch (attr) {
> + case hwmon_in_input:
> + ret = max5970_read_adc(regmap, MAX5970_REG_VOLTAGE_H(channel), val);
> + /*
> + * Calculate voltage from ADC value and MON range.
> + * ddata->mon_rng holds the voltage corresponding to the maximum value the
> + * 10-bit ADC can measure.
> + * To obtain the output, multiply the ADC value by the MON range (in
> + * microvolts) and then divide it by the maximum value of the 10-bit ADC.
> + */
> + *val = mul_u64_u32_shr(*val, ddata->mon_rng[channel], 10);
> + /* uV to mV */
> + *val = *val / 1000;
> + return ret;
> + default:
> + return -EOPNOTSUPP;
> + }
> + default:
> + return -EOPNOTSUPP;
> + }
> +}
> +
> +static umode_t max5970_is_visible(const void *data,
> + enum hwmon_sensor_types type,
> + u32 attr, int channel)
> +{
> + struct max5970_data *ddata = (struct max5970_data *)data;
> +
> + if (channel >= ddata->num_switches)
> + return 0;
> +
> + switch (type) {
> + case hwmon_in:
> + switch (attr) {
> + case hwmon_in_input:
> + return 0444;
> + default:
> + break;
> + }
> + break;
> + case hwmon_curr:
> + switch (attr) {
> + case hwmon_curr_input:
> + /* Current measurement requires knowledge of the shunt resistor value. */
> + if (ddata->shunt_micro_ohms[channel])
> + return 0444;
> + break;
> + default:
> + break;
> + }
> + break;
> + default:
> + break;
> + }
> + return 0;
> +}
> +
> +static const struct hwmon_ops max5970_hwmon_ops = {
> + .is_visible = max5970_is_visible,
> + .read = max5970_read,
> +};
> +
> +static const struct hwmon_channel_info *max5970_info[] = {
> + HWMON_CHANNEL_INFO(in, HWMON_I_INPUT, HWMON_I_INPUT),
> + HWMON_CHANNEL_INFO(curr, HWMON_C_INPUT, HWMON_C_INPUT),
> + NULL
> +};
> +
> +static const struct hwmon_chip_info max5970_chip_info = {
> + .ops = &max5970_hwmon_ops,
> + .info = max5970_info,
> +};
> +
> static int max597x_uvp_ovp_check_mode(struct regulator_dev *rdev, int severity)
> {
> int ret, reg;
> @@ -432,6 +548,7 @@ static int max597x_regulator_probe(struct platform_device *pdev)
> struct regulator_config config = { };
> struct regulator_dev *rdev;
> struct regulator_dev *rdevs[MAX5970_NUM_SWITCHES];
> + struct device *hwmon_dev;
> int num_switches;
> int ret, i;
>
> @@ -485,6 +602,15 @@ static int max597x_regulator_probe(struct platform_device *pdev)
> max597x->shunt_micro_ohms[i] = data->shunt_micro_ohms;
> }
>
> + if (IS_ENABLED(CONFIG_HWMON)) {
This either needs to be IS_REACHABLE, or you need to add "depends on HWMON || HWMON=n"
to Kconfig. Otherwise there will be a build failure if CONFIG_HWMON=m and
CONFIG_REGULATOR_MAX5970=y.
Sorry, I thought I mentioned that before.
Guenter
> + hwmon_dev = devm_hwmon_device_register_with_info(&i2c->dev, "max5970", max597x,
> + &max5970_chip_info, NULL);
> + if (IS_ERR(hwmon_dev)) {
> + return dev_err_probe(&i2c->dev, PTR_ERR(hwmon_dev),
> + "Unable to register hwmon device\n");
> + }
> + }
> +
> if (i2c->irq) {
> ret =
> max597x_setup_irq(&i2c->dev, i2c->irq, rdevs, num_switches,
>
> base-commit: 41f02a383ac652f1a0b5538c5901b7ec93e37290
Powered by blists - more mailing lists