[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CACRpkdbxdMZt4E1SF1v9as-jw=TpvS1mk2TQqAgywMBLbKaNoA@mail.gmail.com>
Date: Tue, 12 Sep 2023 13:04:56 +0200
From: Linus Walleij <linus.walleij@...aro.org>
To: Herve Codina <herve.codina@...tlin.com>
Cc: "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, Andrew Lunn <andrew@...n.ch>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, Lee Jones <lee@...nel.org>,
Qiang Zhao <qiang.zhao@....com>, Li Yang <leoyang.li@....com>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Jaroslav Kysela <perex@...ex.cz>,
Takashi Iwai <tiwai@...e.com>,
Shengjiu Wang <shengjiu.wang@...il.com>,
Xiubo Li <Xiubo.Lee@...il.com>,
Fabio Estevam <festevam@...il.com>,
Nicolin Chen <nicoleotsuka@...il.com>,
Christophe Leroy <christophe.leroy@...roup.eu>,
Randy Dunlap <rdunlap@...radead.org>, netdev@...r.kernel.org,
linuxppc-dev@...ts.ozlabs.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-gpio@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, alsa-devel@...a-project.org,
Simon Horman <horms@...nel.org>,
Christophe JAILLET <christophe.jaillet@...adoo.fr>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>
Subject: Re: [PATCH v5 28/31] pinctrl: Add support for the Lantic PEF2256 pinmux
Hi Herve,
thanks for your patch!
On Tue, Sep 12, 2023 at 12:15 PM Herve Codina <herve.codina@...tlin.com> wrote:
> The Lantiq PEF2256 is a framer and line interface component designed to
> fulfill all required interfacing between an analog E1/T1/J1 line and the
> digital PCM system highway/H.100 bus.
>
> This kind of component can be found in old telecommunication system.
> It was used to digital transmission of many simultaneous telephone calls
> by time-division multiplexing. Also using HDLC protocol, WAN networks
> can be reached through the framer.
>
> This pinmux support handles the pin muxing part (pins RP(A..D) and pins
> XP(A..D)) of the PEF2256.
>
> Signed-off-by: Herve Codina <herve.codina@...tlin.com>
> Reviewed-by: Christophe Leroy <christophe.leroy@...roup.eu>
> Signed-off-by: Christophe Leroy <christophe.leroy@...roup.eu>
Nice to see this as a proper pin control driver!
> drivers/pinctrl/pinctrl-pef2256-regs.h | 65 ++++++
> drivers/pinctrl/pinctrl-pef2256.c | 308 +++++++++++++++++++++++++
Do you really need a separate header just for some registers?
But it's a matter of taste so I'm not gonna complain if you want
it this way.
> +config PINCTRL_PEF2256
> + tristate "Lantiq PEF2256 (FALC56) pin controller driver"
> + depends on OF && FRAMER_PEF2256
> + select PINMUX
select PINCONF
> + select GENERIC_PINCONF
This brings it in implicitly but I prefer that you just select it.
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
I think SPDX mandates that you start the tag with C99 comments
// SPDX-License-Identifier: GPL-2.0-only
> + /* We map 1 group <-> 1 pin */
Also known as "the qualcomm trick", but hey: it's fine.
> +static int pef2256_register_pinctrl(struct pef2256_pinctrl *pef2256)
> +{
> + struct pinctrl_dev *pctrl;
> +
> + pef2256->pctrl_desc.name = dev_name(pef2256->dev);
> + pef2256->pctrl_desc.owner = THIS_MODULE;
> + pef2256->pctrl_desc.pctlops = &pef2256_pctlops;
> + pef2256->pctrl_desc.pmxops = &pef2256_pmxops;
> + if (pef2256->version == PEF2256_VERSION_1_2) {
> + pef2256->pctrl_desc.pins = pef2256_v12_pins;
> + pef2256->pctrl_desc.npins = ARRAY_SIZE(pef2256_v12_pins);
> + pef2256->functions = pef2256_v12_functions;
> + pef2256->nfunctions = ARRAY_SIZE(pef2256_v12_functions);
> + } else {
> + pef2256->pctrl_desc.pins = pef2256_v2x_pins;
> + pef2256->pctrl_desc.npins = ARRAY_SIZE(pef2256_v2x_pins);
> + pef2256->functions = pef2256_v2x_functions;
> + pef2256->nfunctions = ARRAY_SIZE(pef2256_v2x_functions);
> + }
> +
> + pctrl = devm_pinctrl_register(pef2256->dev, &pef2256->pctrl_desc, pef2256);
> + if (IS_ERR(pctrl)) {
> + dev_err(pef2256->dev, "pinctrl driver registration failed\n");
> + return PTR_ERR(pctrl);
> + }
> +
> + return 0;
You could use
return dev_err_probe(...);
> + pef2256_reset_pinmux(pef2256_pinctrl);
> + ret = pef2256_register_pinctrl(pef2256_pinctrl);
> + if (ret)
> + return ret;
Or you could use it down here.
With or without these changes (because they are nitpicks)
Reviewed-by: Linus Walleij <linus.walleij@...aro.org>
Yours,
Linus Walleij
Powered by blists - more mailing lists