Date:   Tue, 12 Sep 2023 15:01:01 +0200
From:   Helge Deller <deller@....de>
To:     John David Anglin <dave.anglin@...l.net>,
        Masahiro Yamada <masahiroy@...nel.org>
Cc:     linux-parisc@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-kbuild@...r.kernel.org,
        Nick Desaulniers <ndesaulniers@...gle.com>
Subject: Re: [PATCH] linux/export: fix reference to exported functions for
 parisc64

Hi Masahiro,

I can confirm as well, that your patch
  linux/export: fix reference to exported functions for parisc64
does indeed fix the boot issue on parisc64.

I did tested it on a C3000 workstation on top of Linus' v6.6-rc1 git tree.
You may add:
Tested-by: Helge Deller <deller@....de>

Dave, I don't see the issue you mention below...

Helge

On 9/10/23 23:30, John David Anglin wrote:
> Hi Masahiro,
>
> The attached change fixed boot at ddb5cdbafaaa 😁
>
> However, v6.5.x boot is still broken:
>
> Run /init as init process
> process '/usr/bin/sh' started with executable stack
> Loading, please wait...
> Starting systemd-udevd version 254.1-3
> e1000 alternatives: applied 0 out of 569 patches
> e1000: Intel(R) PRO/1000 Network Driver
> e1000: Copyright (c) 1999-2006 Intel Corporation.
> scsi_mod alternatives: applied 0 out of 7 patches
> SCSI subsystem initialized
> usbcore alternatives: applied 0 out of 18 patches
> usbcore: registered new interface driver usbfs
> libata alternatives: applied 0 out of 3 patches
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> mptbase alternatives: applied 0 out of 73 patches
> ehci_hcd alternatives: applied 0 out of 114 patches
> sata_sil24 alternatives: applied 0 out of 56 patches
> Fusion MPT base driver 3.04.20
> Copyright (c) 1999-2008 LSI Corporation
> sata_sil24 0000:00:01.0: Applying completion IRQ loss on PCI-X errata fix
> scsi host0: sata_sil24
> scsi host1: sata_sil24
> pata_sil680 0000:60:02.0: sil680: 133MHz clock.
> scsi host2: sata_sil24
> ehci_pci alternatives: applied 0 out of 2 patches
> ohci_hcd alternatives: applied 0 out of 144 patches
> ehci-pci 0000:60:01.2: EHCI Host Controller
> scsi host3: pata_sil680
> ehci-pci 0000:60:01.2: new USB bus registered, assigned bus number 1
> scsi host4: sata_sil24
> ata1: SATA max UDMA/100 host m128@...fffffff80088000 port 0xffffffff80080000 ir6
> ata2: SATA max UDMA/100 host m128@...fffffff80088000 port 0xffffffff80082000 ir6
> ata3: SATA max UDMA/100 host m128@...fffffff80088000 port 0xffffffff80084000 ir6
> ata4: SATA max UDMA/100 host m128@...fffffff80088000 port 0xffffffff80086000 ir6
> e1000 0000:60:03.0 eth0: (PCI:33MHz:32-bit) 00:11:0a:31:8a:77
> ehci-pci 0000:60:01.2: irq 71, io mem 0xffffffffb00a1000
> scsi host5: pata_sil680
> ata5: PATA max UDMA/133 cmd 0x26058 ctl 0x26064 bmdma 0x26040 irq 72
> ata6: PATA max UDMA/133 cmd 0x26050 ctl 0x26060 bmdma 0x26048 irq 72
> e1000 0000:60:03.0 eth0: Intel(R) PRO/1000 Network Connection
> ehci-pci 0000:60:01.2: USB 2.0 started, EHCI 0.95
> usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
> usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb1: Product: EHCI Host Controller
> usb usb1: Manufacturer: Linux 6.5.2-dirty ehci_hcd
> usb usb1: SerialNumber: 0000:60:01.2
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 5 ports detected
> ata1: SATA link down (SStatus 0 SControl 0)
> ata2: SATA link down (SStatus 0 SControl 0)
> ata3: SATA link down (SStatus 0 SControl 0)
> ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> ata4.00: ATA-10: ST4000VN008-2DR166, SC60, max UDMA/133
> ata4.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> ata4.00: configured for UDMA/100
> scsi 4:0:0:0: Direct-Access     ATA      ST4000VN008-2DR1 SC60 PQ: 0 ANSI: 5
> ata6.00: ATAPI: HL-DT-STDVD+-RW GSA-H21L, 1.04, max UDMA/44
> scsi 5:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GSA-H21L 1.04 PQ: 0 ANSI: 5
> random: crng init done
> Timed out for waiting the udev queue being empty.
> Begin: Loading essential drivers ... done.
> Begin: Running /scripts/init-premount ... done.
> Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
> Begin: Running /scripts/local-premount ... done.
> Timed out for waiting the udev queue being empty.
> Begin: Waiting for root file system ... Begin: Running /scripts/local-block ....
> Begin: Running /scripts/local-block ... done.
> Begin: Running /scripts/local-block ... done.
> Begin: Running /scripts/local-block ... done.
> Begin: Running /scripts/local-block ... done.
> Begin: Running /scripts/local-block ... done.
> Begin: Running /scripts/local-block ... done.
> Begin: Running /scripts/local-block ... done.
> Begin: Running /scripts/local-block ... done.
> Begin: Running /scripts/local-block ... done.
> Begin: Running /scripts/local-block ... done.
> Begin: Running /scripts/local-block ... done.
> Begin: Running /scripts/local-block ... done.
> Begin: Running /scripts/local-block ... done.
> Begin: Running /scripts/local-block ... done.
> Begin: Running /scripts/local-block ... done.
> Begin: Running /scripts/local-block ... done.
> Begin: Running /scripts/local-block ... done.
> Begin: Running /scripts/local-block ... done.
> done.
> Gave up waiting for root file system device.  Common problems:
>   - Boot args (cat /proc/cmdline)
>     - Check rootdelay= (did the system wait long enough?)
>   - Missing modules (cat /proc/modules; ls /dev)
> ALERT!  LABEL=ROOT does not exist.  Dropping to a shell!
> Rebooting automatically due to panic= boot argument
>
> I'll see if I can find the commit that breaks 6.5.
>
> Thanks,
> Dave
>
> On 2023-09-10 3:47 a.m., Masahiro Yamada wrote:
>> Hi John, Helge,
>>
>> Could you test the attached patch please?
>>
>>
>> Again, I only tested compilation for this.
>> I do not have parisc64 hardware.
>> In my understanding, QEMU does not support hppa64.
>> I do not find a way to test parisc64.
>>
>>
>> Masahiro Yamada
>>
>>
>>
>>
>>
>> On Sun, Sep 10, 2023 at 4:20 AM Masahiro Yamada <masahiroy@...nel.org> wrote:
>>> With a little more investigation,
>>> I found arch/parisc/kernel/parisc_ksyms.c
>>> is causing the issue.
>>>
>>> That file is a collection of EXPORT_SYMBOL
>>> of assembly code.
>>>
>>> I will take a closer look tomorrow.
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> On Sun, Sep 10, 2023 at 2:20 AM Masahiro Yamada <masahiroy@...nel.org> wrote:
>>>> On Fri, Sep 8, 2023 at 7:02 AM John David Anglin <dave.anglin@...l.net> wrote:
>>>>> On 2023-09-05 7:59 p.m., John David Anglin wrote:
>>>>>> On 2023-09-05 5:57 p.m., John David Anglin wrote:
>>>>>>> I'll check ddb5cdbafaaa.
>>>>>> Similar fault with ddb5cdbafaaa:
>>>>> The alignment of the __kstrtab_ symbols in vmlinux seems wrong.
>>>> __kstrtab_ symbols do not need alignment.
>>>>
>>>> They were not aligned at all
>>>> before ddb5cdbafaaa^.
>>>>
>>>>
>>>>
>>>>>   I'm fairly certain that function
>>>>> references prefixed with P% on hppa64 need 8 byte alignment.
>>>> Yeah.
>>>> In the following dump, all of __ksymtab_* are correctly 8-byte aligned.
>>>>
>>>>
>>>>> 81662: 0000000040ea4358     0 NOTYPE  LOCAL  DEFAULT   16 __kstrtab_system[...]
>>>>>    81663: 0000000040ea4748     0 NOTYPE  LOCAL  DEFAULT   16 __kstrtabns_syst[...]
>>>>>    81664: 0000000040e8e830     0 NOTYPE  LOCAL  DEFAULT   14 __ksymtab_system[...]
>>>>>    81665: 0000000040ea4365     0 NOTYPE  LOCAL  DEFAULT   16 __kstrtab_static[...]
>>>>>    81666: 0000000040ea4748     0 NOTYPE  LOCAL  DEFAULT   16 __kstrtabns_stat[...]
>>>>>    81667: 0000000040ea1640     0 NOTYPE  LOCAL  DEFAULT   15 __ksymtab_static[...]
>>>>>    81668: 0000000040ea437c     0 NOTYPE  LOCAL  DEFAULT   16 __kstrtab_reset_[...]
>>>>>    81669: 0000000040ea4748     0 NOTYPE  LOCAL  DEFAULT   16 __kstrtabns_rese[...]
>>>>>    81670: 0000000040e8bbc0     0 NOTYPE  LOCAL  DEFAULT   14 __ksymtab_reset_[...]
>>>>>    81671: 0000000040ea438a     0 NOTYPE  LOCAL  DEFAULT   16 __kstrtab_loops_[...]
>>>>>    81672: 0000000040ea4748     0 NOTYPE  LOCAL  DEFAULT   16 __kstrtabns_loop[...]
>>>>>    81673: 0000000040e86610     0 NOTYPE  LOCAL  DEFAULT   14 __ksymtab_loops_[...]
>>>>>    81674: 0000000040ea439a     0 NOTYPE  LOCAL  DEFAULT   16 __kstrtab_init_uts_ns
>>>>>    81675: 0000000040ea4748     0 NOTYPE  LOCAL  DEFAULT   16 __kstrtabns_init[...]
>>>>>    81676: 0000000040e99180     0 NOTYPE  LOCAL  DEFAULT   15 __ksymtab_init_uts_ns
>>>>>    81677: 0000000040ea43a6     0 NOTYPE  LOCAL  DEFAULT   16 __kstrtab_name_t[...]
>>>>>    81678: 0000000040ea4748     0 NOTYPE  LOCAL  DEFAULT   16 __kstrtabns_name[...]
>>>>>    81679: 0000000040e9b340     0 NOTYPE  LOCAL  DEFAULT   15 __ksymtab_name_t[...]
>>>>>    81680: 0000000040ea43b4     0 NOTYPE  LOCAL  DEFAULT   16 __kstrtab_wait_f[...]
>>>>>    81681: 0000000040ea4748     0 NOTYPE  LOCAL  DEFAULT   16 __kstrtabns_wait[...]
>>>>>    81682: 0000000040ea3638     0 NOTYPE  LOCAL  DEFAULT   15 __ksymtab_wait_f[...]
>>>>>    81683: 0000000040ea43c7     0 NOTYPE  LOCAL  DEFAULT   16 __kstrtab_init_task
>>>>> [...]
>>>>>
>>>>> I'm not sure how we get symbols that aren't 8 byte aligned.  The ".balign 4" directive
>>>>> in __KSYMTAB doesn't seem correct but it's not the whole problem.
>>>>>
>>>>> Dave

Powered by blists - more mailing lists