[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <0e69140a-bd2f-16b1-ea34-f2d86ecfc414@quicinc.com>
Date: Tue, 12 Sep 2023 14:46:27 +0800
From: Fenglin Wu <quic_fenglinw@...cinc.com>
To: <linux-arm-msm@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <robh+dt@...nel.org>,
<agross@...nel.org>, <andersson@...nel.org>,
<dmitry.baryshkov@...aro.org>
CC: <quic_collinsd@...cinc.com>, <quic_subbaram@...cinc.com>,
<quic_kamalw@...cinc.com>, <jestar@....qualcomm.com>
Subject: Re: [RESEND PATCH v6 0/3] Add support for vibrator in multiple PMICs
Can anyone help to review the driver changes?
thanks
Fenglin Wu
On 8/28/2023 1:32 PM, Fenglin Wu wrote:
> Add SW support for the vibrator module inside PMI632, PM7250B, PM7325B, PM7550BA.
> It is very similar to the vibrator module inside PM8916 which is supported in
> pm8xxx-vib driver but just the drive amplitude is controlled with 2 registers,
> and the register base offset in each PMIC is different.
>
> Changes in v6:
> 1. Add "qcom,pmi632-vib" as a standalone compatible string.
>
> Changes in v5:
> 1. Drop "qcom,spmi-vib-gen2" generic compatible string as requested
> and use device specific compatible strings only.
>
> Changes in v4:
> 1. Update to use the combination of the HW type and register offset
> as the constant match data, the register base address defined in
> 'reg' property will be added when accessing SPMI registers using
> regmap APIs.
> 2. Remove 'qcom,spmi-vib-gen1' generic compatible string.
>
> Changes in v3:
> 1. Refactor the driver to support different type of the vibrators with
> better flexibility by introducing the HW type with corresponding
> register fields definitions.
> 2. Add 'qcom,spmi-vib-gen1' and 'qcom,spmi-vib-gen2' compatible
> strings, and add PMI632, PM7250B, PM7325B, PM7550BA as compatbile as
> spmi-vib-gen2.
>
> Changes in v2:
> Remove the "pm7550ba-vib" compatible string as it's compatible with pm7325b.
>
>
> Fenglin Wu (3):
> input: pm8xxx-vib: refactor to easily support new SPMI vibrator
> dt-bindings: input: qcom,pm8xxx-vib: add new SPMI vibrator module
> input: pm8xxx-vibrator: add new SPMI vibrator support
>
> .../bindings/input/qcom,pm8xxx-vib.yaml | 16 +-
> drivers/input/misc/pm8xxx-vibrator.c | 171 ++++++++++++------
> 2 files changed, 132 insertions(+), 55 deletions(-)
>
Powered by blists - more mailing lists