lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <87a5tramab.fsf@miraculix.mork.no>
Date:   Tue, 12 Sep 2023 09:22:20 +0200
From:   Bjørn Mork <bjorn@...k.no>
To:     Stefan x Nilsson <stefan.x.nilsson@...s.com>
Cc:     "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>, <netdev@...r.kernel.org>,
        <linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <kernel@...s.com>
Subject: Re: [PATCH net-next] qmi_wwan: Add rawip module param

Stefan x Nilsson <stefan.x.nilsson@...s.com> writes:

> Certain QMI modems will start communicating in rawip mode after
> bootup, and will not work properly if communication starts off in
> ethernet mode. So add a module parameter, rawip_as_default, that
> can be used to load the qmi driver in rawip mode.
>
> The advantage compared to changing rawip at a later point using
> sysfs is that the os will not detect the device and start talking
> to it while the driver is still in incorrect mode.
>
> Signed-off-by: Stefan x Nilsson <stefan.x.nilsson@...s.com>
> ---
>  drivers/net/usb/qmi_wwan.c | 11 +++++++++++
>  1 file changed, 11 insertions(+)
>
> diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
> index 344af3c5c836..968c60ececf8 100644
> --- a/drivers/net/usb/qmi_wwan.c
> +++ b/drivers/net/usb/qmi_wwan.c
> @@ -46,6 +46,10 @@
>   * commands on a serial interface
>   */
>  
> +/* Module parameters */
> +static bool rawip_as_default;
> +module_param(rawip_as_default, bool, 0644);
> +
>  /* driver specific data */
>  struct qmi_wwan_state {
>  	struct usb_driver *subdriver;
> @@ -843,6 +847,13 @@ static int qmi_wwan_bind(struct usbnet *dev, struct usb_interface *intf)
>  	}
>  	dev->net->netdev_ops = &qmi_wwan_netdev_ops;
>  	dev->net->sysfs_groups[0] = &qmi_wwan_sysfs_attr_group;
> +
> +	/* Set the driver into rawip mode if requested by module param */
> +	if (rawip_as_default) {
> +		info->flags |= QMI_WWAN_FLAG_RAWIP;
> +		qmi_wwan_netdev_setup(dev->net);
> +	}
> +
>  err:
>  	return status;
>  }
>

NAK

There is no reason to start communicating with the device before
changing the framing, using the existing sysfs interface.

This seems to be a workaround for some userspace bug.  I don't think we
yet another userspace knob for that.  And certainly not one that applies
to every device.



Bjørn

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ