lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Tue, 12 Sep 2023 11:02:03 +0200
From:   Bartosz Golaszewski <brgl@...ev.pl>
To:     Yinbo Zhu <zhuyinbo@...ngson.cn>
Cc:     Linus Walleij <linus.walleij@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>, linux-gpio@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        Jianmin Lv <lvjianmin@...ngson.cn>, wanghongliang@...ngson.cn,
        loongson-kernel@...ts.loongnix.cn
Subject: Re: [PATCH v5 2/2] gpio: loongson: add more gpio chip support

On Tue, Aug 29, 2023 at 2:35 PM Yinbo Zhu <zhuyinbo@...ngson.cn> wrote:
>
> This patch was to add loongson 2k0500, 2k2000 and 3a5000 gpio chip
> driver support.
>
> Signed-off-by: Yinbo Zhu <zhuyinbo@...ngson.cn>
> ---
>  drivers/gpio/gpio-loongson-64bit.c | 125 ++++++++++++++++++++++++++---
>  1 file changed, 113 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpio/gpio-loongson-64bit.c b/drivers/gpio/gpio-loongson-64bit.c
> index 06213bbfabdd..2608f7eeba3b 100644
> --- a/drivers/gpio/gpio-loongson-64bit.c
> +++ b/drivers/gpio/gpio-loongson-64bit.c
> @@ -23,9 +23,10 @@ enum loongson_gpio_mode {
>  struct loongson_gpio_chip_data {
>         const char              *label;
>         enum loongson_gpio_mode mode;
> -       unsigned int            conf_offset;
> -       unsigned int            out_offset;
> -       unsigned int            in_offset;
> +       u32                     conf_offset;
> +       u32                     out_offset;
> +       u32                     in_offset;
> +       u32                     inten_offset;

Why are you doing this? If this change is needed, it warrants at least
a mention in the commit message.

Bart

>  };
>
>  struct loongson_gpio_chip {
> @@ -117,19 +118,29 @@ static void loongson_gpio_set(struct gpio_chip *chip, unsigned int pin, int valu
>
>  static int loongson_gpio_to_irq(struct gpio_chip *chip, unsigned int offset)
>  {
> +       unsigned int u;
>         struct platform_device *pdev = to_platform_device(chip->parent);
> +       struct loongson_gpio_chip *lgpio = to_loongson_gpio_chip(chip);
> +
> +       if (lgpio->chip_data->mode == BIT_CTRL_MODE) {
> +               /* Get the register index from offset then multiply by bytes per register */
> +               u = readl(lgpio->reg_base + lgpio->chip_data->inten_offset + (offset / 32) * 4);
> +               u |= BIT(offset % 32);
> +               writel(u, lgpio->reg_base + lgpio->chip_data->inten_offset + (offset / 32) * 4);
> +       } else {
> +               writeb(1, lgpio->reg_base + lgpio->chip_data->inten_offset + offset);
> +       }
>
>         return platform_get_irq(pdev, offset);
>  }
>
>  static int loongson_gpio_init(struct device *dev, struct loongson_gpio_chip *lgpio,
> -                             struct device_node *np, void __iomem *reg_base)
> +                             void __iomem *reg_base)
>  {
>         int ret;
>         u32 ngpios;
>
>         lgpio->reg_base = reg_base;
> -
>         if (lgpio->chip_data->mode == BIT_CTRL_MODE) {
>                 ret = bgpio_init(&lgpio->chip, dev, 8,
>                                 lgpio->reg_base + lgpio->chip_data->in_offset,
> @@ -148,15 +159,15 @@ static int loongson_gpio_init(struct device *dev, struct loongson_gpio_chip *lgp
>                 lgpio->chip.direction_output = loongson_gpio_direction_output;
>                 lgpio->chip.set = loongson_gpio_set;
>                 lgpio->chip.parent = dev;
> +               device_property_read_u32(dev, "ngpios", &ngpios);
> +               lgpio->chip.ngpio = ngpios;
>                 spin_lock_init(&lgpio->lock);
>         }
>
> -       device_property_read_u32(dev, "ngpios", &ngpios);
> -
> -       lgpio->chip.can_sleep = 0;
> -       lgpio->chip.ngpio = ngpios;
>         lgpio->chip.label = lgpio->chip_data->label;
> -       lgpio->chip.to_irq = loongson_gpio_to_irq;
> +       lgpio->chip.can_sleep = false;
> +       if (lgpio->chip_data->inten_offset)
> +               lgpio->chip.to_irq = loongson_gpio_to_irq;
>
>         return devm_gpiochip_add_data(dev, &lgpio->chip, lgpio);
>  }
> @@ -165,7 +176,6 @@ static int loongson_gpio_probe(struct platform_device *pdev)
>  {
>         void __iomem *reg_base;
>         struct loongson_gpio_chip *lgpio;
> -       struct device_node *np = pdev->dev.of_node;
>         struct device *dev = &pdev->dev;
>
>         lgpio = devm_kzalloc(dev, sizeof(*lgpio), GFP_KERNEL);
> @@ -178,7 +188,7 @@ static int loongson_gpio_probe(struct platform_device *pdev)
>         if (IS_ERR(reg_base))
>                 return PTR_ERR(reg_base);
>
> -       return loongson_gpio_init(dev, lgpio, np, reg_base);
> +       return loongson_gpio_init(dev, lgpio, reg_base);
>  }
>
>  static const struct loongson_gpio_chip_data loongson_gpio_ls2k_data = {
> @@ -187,6 +197,57 @@ static const struct loongson_gpio_chip_data loongson_gpio_ls2k_data = {
>         .conf_offset = 0x0,
>         .in_offset = 0x20,
>         .out_offset = 0x10,
> +       .inten_offset = 0x30,
> +};
> +
> +static const struct loongson_gpio_chip_data loongson_gpio_ls2k0500_data0 = {
> +       .label = "ls2k0500_gpio",
> +       .mode = BIT_CTRL_MODE,
> +       .conf_offset = 0x0,
> +       .in_offset = 0x8,
> +       .out_offset = 0x10,
> +       .inten_offset = 0xb0,
> +};
> +
> +static const struct loongson_gpio_chip_data loongson_gpio_ls2k0500_data1 = {
> +       .label = "ls2k0500_gpio",
> +       .mode = BIT_CTRL_MODE,
> +       .conf_offset = 0x0,
> +       .in_offset = 0x8,
> +       .out_offset = 0x10,
> +       .inten_offset = 0x98,
> +};
> +
> +static const struct loongson_gpio_chip_data loongson_gpio_ls2k2000_data0 = {
> +       .label = "ls2k2000_gpio",
> +       .mode = BIT_CTRL_MODE,
> +       .conf_offset = 0x0,
> +       .in_offset = 0xc,
> +       .out_offset = 0x8,
> +};
> +
> +static const struct loongson_gpio_chip_data loongson_gpio_ls2k2000_data1 = {
> +       .label = "ls2k2000_gpio",
> +       .mode = BIT_CTRL_MODE,
> +       .conf_offset = 0x0,
> +       .in_offset = 0x20,
> +       .out_offset = 0x10,
> +};
> +
> +static const struct loongson_gpio_chip_data loongson_gpio_ls2k2000_data2 = {
> +       .label = "ls2k2000_gpio",
> +       .mode = BIT_CTRL_MODE,
> +       .conf_offset = 0x84,
> +       .in_offset = 0x88,
> +       .out_offset = 0x80,
> +};
> +
> +static const struct loongson_gpio_chip_data loongson_gpio_ls3a5000_data = {
> +       .label = "ls3a5000_gpio",
> +       .mode = BIT_CTRL_MODE,
> +       .conf_offset = 0x0,
> +       .in_offset = 0xc,
> +       .out_offset = 0x8,
>  };
>
>  static const struct loongson_gpio_chip_data loongson_gpio_ls7a_data = {
> @@ -202,6 +263,30 @@ static const struct of_device_id loongson_gpio_of_match[] = {
>                 .compatible = "loongson,ls2k-gpio",
>                 .data = &loongson_gpio_ls2k_data,
>         },
> +       {
> +               .compatible = "loongson,ls2k0500-gpio0",
> +               .data = &loongson_gpio_ls2k0500_data0,
> +       },
> +       {
> +               .compatible = "loongson,ls2k0500-gpio1",
> +               .data = &loongson_gpio_ls2k0500_data1,
> +       },
> +       {
> +               .compatible = "loongson,ls2k2000-gpio0",
> +               .data = &loongson_gpio_ls2k2000_data0,
> +       },
> +       {
> +               .compatible = "loongson,ls2k2000-gpio1",
> +               .data = &loongson_gpio_ls2k2000_data1,
> +       },
> +       {
> +               .compatible = "loongson,ls2k2000-gpio2",
> +               .data = &loongson_gpio_ls2k2000_data2,
> +       },
> +       {
> +               .compatible = "loongson,ls3a5000-gpio",
> +               .data = &loongson_gpio_ls3a5000_data,
> +       },
>         {
>                 .compatible = "loongson,ls7a-gpio",
>                 .data = &loongson_gpio_ls7a_data,
> @@ -215,6 +300,22 @@ static const struct acpi_device_id loongson_gpio_acpi_match[] = {
>                 .id = "LOON0002",
>                 .driver_data = (kernel_ulong_t)&loongson_gpio_ls7a_data,
>         },
> +       {
> +               .id = "LOON0007",
> +               .driver_data = (kernel_ulong_t)&loongson_gpio_ls3a5000_data,
> +       },
> +       {
> +               .id = "LOON000A",
> +               .driver_data = (kernel_ulong_t)&loongson_gpio_ls2k2000_data0,
> +       },
> +       {
> +               .id = "LOON000B",
> +               .driver_data = (kernel_ulong_t)&loongson_gpio_ls2k2000_data1,
> +       },
> +       {
> +               .id = "LOON000C",
> +               .driver_data = (kernel_ulong_t)&loongson_gpio_ls2k2000_data2,
> +       },
>         {}
>  };
>  MODULE_DEVICE_TABLE(acpi, loongson_gpio_acpi_match);
> --
> 2.20.1
>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ