[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230913112032.90618-9-abbotti@mev.co.uk>
Date: Wed, 13 Sep 2023 12:20:27 +0100
From: Ian Abbott <abbotti@....co.uk>
To: linux-kernel@...r.kernel.org
Cc: Arnd Bergmann <arnd@...nel.org>,
Niklas Schnelle <schnelle@...ux.ibm.com>,
Ian Abbott <abbotti@....co.uk>
Subject: [PATCH 08/13] comedi: ni_labpc_common: Conditionally remove I/O port support
In a future patch, the port I/O functions (`inb()`, `outb()`, and
friends will only be declared in the `HAS_IOPORT` configuration option
is enabled.
The ni_labpc_common module is used by the ni_labpc module (for ISA
cards), the ni_labpc_cs module (for PCMCIA cards), and the ni_labpc_pci
module (for PCI cards). The ISA and PCMCIA cards use port I/O and the
PCI cards use memory-mapped I/O.
Conditionally compile the parts of the module that use the port I/O
functions so they are compiled if and only if the `CONFIG_HAS_PORTIO`
macro is defined, so that the module can be built if the port I/O
functions have not been declared.
Cc: Arnd Bergmann <arnd@...nel.org>
Cc: Niklas Schnelle <schnelle@...ux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@....co.uk>
---
drivers/comedi/drivers/ni_labpc_common.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/comedi/drivers/ni_labpc_common.c b/drivers/comedi/drivers/ni_labpc_common.c
index 5d5c1d0e9cb6..7170b4e98b5e 100644
--- a/drivers/comedi/drivers/ni_labpc_common.c
+++ b/drivers/comedi/drivers/ni_labpc_common.c
@@ -78,6 +78,9 @@ static const struct comedi_lrange range_labpc_ao = {
* functions that do inb/outb and readb/writeb so we can use
* function pointers to decide which to use
*/
+
+#ifdef CONFIG_HAS_PORTIO
+
static unsigned int labpc_inb(struct comedi_device *dev, unsigned long reg)
{
return inb(dev->iobase + reg);
@@ -89,6 +92,8 @@ static void labpc_outb(struct comedi_device *dev,
outb(byte, dev->iobase + reg);
}
+#endif /* CONFIG_HAS_PORTIO */
+
static unsigned int labpc_readb(struct comedi_device *dev, unsigned long reg)
{
return readb(dev->mmio + reg);
@@ -1200,8 +1205,12 @@ int labpc_common_attach(struct comedi_device *dev,
devpriv->read_byte = labpc_readb;
devpriv->write_byte = labpc_writeb;
} else {
+#ifdef CONFIG_HAS_PORTIO
devpriv->read_byte = labpc_inb;
devpriv->write_byte = labpc_outb;
+#else
+ return -ENXIO;
+#endif
}
/* initialize board's command registers */
--
2.40.1
Powered by blists - more mailing lists