| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230913113247.91749-10-abbotti@mev.co.uk>
Date: Wed, 13 Sep 2023 12:32:43 +0100
From: Ian Abbott <abbotti@....co.uk>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Ian Abbott <abbotti@....co.uk>,
H Hartley Sweeten <hsweeten@...ionengravers.com>,
Arnd Bergmann <arnd@...nel.org>,
Niklas Schnelle <schnelle@...ux.ibm.com>
Subject: [PATCH 09/13] comedi: ni_mio_common: Conditionally use I/O port or MMIO
In a future patch, the port I/O functions (`inb()`, `outb()`, and
friends will only be declared in the `HAS_IOPORT` configuration option
is enabled.
The "ni_mio_common.c" file contains calls to both port I/O functions and
memory-mapped I/O functions. The file is `#include`d by "ni_atmio.c",
"ni_mio_cs.c", and "ni_pcimio.c" for the ni_atmio, ni_mio_cs, and
ni_pcimio modules, respectively. Only "ni_pcimio.c" defines the
`PCIDMA` macro before including "ni_mio_common.c" and various bits of
code in "ni_mio_common.c" is conditionally compiled according to whether
that macro is defined or not. Currently, the port I/O function calls
are compiled in regardless of whether the `PCIDMA` macro is defined or
not. However, the fact is that the ni_atmio and ni_mio_cs modules will
never call the memory-mapped I/O functions, and the ni_pcimio module
will never call the port I/O functions.
Calls to the port I/O and memory-mapped I/O functions is confined to the
`ni_writel()`, `ni_writew()`, `ni_writeb()`, `ni_readl()`, `ni_readw()`,
and `ni_readb()` functions which do a run-time test to decide whether to
call the port I/O functions or the memory-mapped I/O functions.
Conditionally compile two variants of the functions so they only call
the port I/O functions if the `PCIDMA` macro is undefined (for the
ni_atmio and ni_mio_cs modules), and only call the memory-mapped I/O
functions if the `PCIDMA` macro is defined (for the ni_pcimio module).
Add a run-time check in the `ni_E_init()` function to return an error if
the comedi device has been set up to use port I/O if `PCIDMA` is
defined, or has been set up to use memory-mapped I/O if `PCIDMA` is not
defined.
The changes make it possible to build the ni_pcimio module even if the
port I/O functions have not been declared. (The ni_atmio and ni_mio_cs
modules do still require the port I/O functions to be declared.)
Cc: Arnd Bergmann <arnd@...nel.org>
Cc: Niklas Schnelle <schnelle@...ux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@....co.uk>
---
drivers/comedi/drivers/ni_mio_common.c | 70 ++++++++++++++++++--------
1 file changed, 50 insertions(+), 20 deletions(-)
diff --git a/drivers/comedi/drivers/ni_mio_common.c b/drivers/comedi/drivers/ni_mio_common.c
index 638be08b43e4..980f309d6de7 100644
--- a/drivers/comedi/drivers/ni_mio_common.c
+++ b/drivers/comedi/drivers/ni_mio_common.c
@@ -46,6 +46,12 @@
#include <linux/comedi/comedi_8255.h>
#include "mite.h"
+#ifdef PCIDMA
+#define IS_PCIMIO 1
+#else
+#define IS_PCIMIO 0
+#endif
+
/* A timeout count */
#define NI_TIMEOUT 1000
@@ -219,54 +225,72 @@ enum timebase_nanoseconds {
static const int num_adc_stages_611x = 3;
+#ifdef PCIDMA
+
static void ni_writel(struct comedi_device *dev, unsigned int data, int reg)
{
- if (dev->mmio)
- writel(data, dev->mmio + reg);
- else
- outl(data, dev->iobase + reg);
+ writel(data, dev->mmio + reg);
}
static void ni_writew(struct comedi_device *dev, unsigned int data, int reg)
{
- if (dev->mmio)
- writew(data, dev->mmio + reg);
- else
- outw(data, dev->iobase + reg);
+ writew(data, dev->mmio + reg);
}
static void ni_writeb(struct comedi_device *dev, unsigned int data, int reg)
{
- if (dev->mmio)
- writeb(data, dev->mmio + reg);
- else
- outb(data, dev->iobase + reg);
+ writeb(data, dev->mmio + reg);
}
static unsigned int ni_readl(struct comedi_device *dev, int reg)
{
- if (dev->mmio)
- return readl(dev->mmio + reg);
+ return readl(dev->mmio + reg);
+}
+
+static unsigned int ni_readw(struct comedi_device *dev, int reg)
+{
+ return readw(dev->mmio + reg);
+}
+
+static unsigned int ni_readb(struct comedi_device *dev, int reg)
+{
+ return readb(dev->mmio + reg);
+}
+#else /* PCIDMA */
+
+static void ni_writel(struct comedi_device *dev, unsigned int data, int reg)
+{
+ outl(data, dev->iobase + reg);
+}
+
+static void ni_writew(struct comedi_device *dev, unsigned int data, int reg)
+{
+ outw(data, dev->iobase + reg);
+}
+
+static void ni_writeb(struct comedi_device *dev, unsigned int data, int reg)
+{
+ outb(data, dev->iobase + reg);
+}
+
+static unsigned int ni_readl(struct comedi_device *dev, int reg)
+{
return inl(dev->iobase + reg);
}
static unsigned int ni_readw(struct comedi_device *dev, int reg)
{
- if (dev->mmio)
- return readw(dev->mmio + reg);
-
return inw(dev->iobase + reg);
}
static unsigned int ni_readb(struct comedi_device *dev, int reg)
{
- if (dev->mmio)
- return readb(dev->mmio + reg);
-
return inb(dev->iobase + reg);
}
+#endif /* PCIDMA */
+
/*
* We automatically take advantage of STC registers that can be
* read/written directly in the I/O space of the board.
@@ -5977,6 +6001,12 @@ static int ni_E_init(struct comedi_device *dev,
int i;
const char *dev_family = devpriv->is_m_series ? "ni_mseries"
: "ni_eseries";
+ if (!IS_PCIMIO != !dev->mmio) {
+ dev_err(dev->class_dev,
+ "%s: bug! %s device not supported.\n",
+ KBUILD_MODNAME, board->name);
+ return -ENXIO;
+ }
/* prepare the device for globally-named routes. */
if (ni_assign_device_routes(dev_family, board->name,
--
2.40.1
Powered by blists - more mailing lists