| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230913115211.11512-1-zhifeng.tang@unisoc.com>
Date: Wed, 13 Sep 2023 19:52:11 +0800
From: Zhifeng Tang <zhifeng.tang@...soc.com>
To: Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Orson Zhai <orsonzhai@...il.com>,
Baolin Wang <baolin.wang@...ux.alibaba.com>,
Chunyan Zhang <zhang.lyra@...il.com>,
Zhifeng Tang <zhifeng.tang@...soc.com>,
Maxime Ripard <mripard@...nel.org>
CC: <linux-clk@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
Zhifeng Tang <zhifeng.tang23@...il.com>,
Wenming Wu <wenming.wu@...soc.com>
Subject: [PATCH V2] clk: sprd: Composite driver support offset config
The composite interface support the offset configuration,
which is used to support mux and div in different registers.
Because some sprd projects, the divider has different
addresses from mux for one composite clk.
Signed-off-by: Zhifeng Tang <zhifeng.tang@...soc.com>
Reviewed-by: Chunyan Zhang <zhang.lyra@...il.com>
---
Change in V2: fixed Chunyan review comments.
-Fixed the typo "userd" and add more detail in commit message.
-The **_OFFSET() function adds an offset parameter,and offset
is of type 'signed' int,which would be cover the cases no
matter whether the divider register offset is up or down based
on the mux register address.That would be more flexible.
---
drivers/clk/sprd/composite.h | 36 +++++++++++++++++++++++++++---------
drivers/clk/sprd/div.c | 6 +++---
drivers/clk/sprd/div.h | 17 ++++++++++++-----
3 files changed, 42 insertions(+), 17 deletions(-)
diff --git a/drivers/clk/sprd/composite.h b/drivers/clk/sprd/composite.h
index adbabbe596b7..15cec97d2aa7 100644
--- a/drivers/clk/sprd/composite.h
+++ b/drivers/clk/sprd/composite.h
@@ -19,24 +19,24 @@ struct sprd_comp {
};
#define SPRD_COMP_CLK_HW_INIT_FN(_struct, _name, _parent, _reg, _table, \
- _mshift, _mwidth, _dshift, _dwidth, \
- _flags, _fn) \
+ _mshift, _mwidth, _doffset, _dshift, \
+ _dwidth, _flags, _fn) \
struct sprd_comp _struct = { \
.mux = _SPRD_MUX_CLK(_mshift, _mwidth, _table), \
- .div = _SPRD_DIV_CLK(_dshift, _dwidth), \
+ .div = _SPRD_DIV_CLK(_doffset, _dshift, _dwidth), \
.common = { \
.regmap = NULL, \
.reg = _reg, \
.hw.init = _fn(_name, _parent, \
&sprd_comp_ops, _flags), \
- } \
+ } \
}
#define SPRD_COMP_CLK_TABLE(_struct, _name, _parent, _reg, _table, \
_mshift, _mwidth, _dshift, _dwidth, _flags) \
SPRD_COMP_CLK_HW_INIT_FN(_struct, _name, _parent, _reg, _table, \
- _mshift, _mwidth, _dshift, _dwidth, \
- _flags, CLK_HW_INIT_PARENTS)
+ _mshift, _mwidth, 0x0, _dshift, \
+ _dwidth, _flags, CLK_HW_INIT_PARENTS)
#define SPRD_COMP_CLK(_struct, _name, _parent, _reg, _mshift, \
_mwidth, _dshift, _dwidth, _flags) \
@@ -47,15 +47,33 @@ struct sprd_comp {
_mshift, _mwidth, _dshift, \
_dwidth, _flags) \
SPRD_COMP_CLK_HW_INIT_FN(_struct, _name, _parent, _reg, _table, \
- _mshift, _mwidth, _dshift, _dwidth, \
- _flags, CLK_HW_INIT_PARENTS_DATA)
+ _mshift, _mwidth, 0x0, _dshift, \
+ _dwidth, _flags, \
+ CLK_HW_INIT_PARENTS_DATA)
#define SPRD_COMP_CLK_DATA(_struct, _name, _parent, _reg, _mshift, \
_mwidth, _dshift, _dwidth, _flags) \
- SPRD_COMP_CLK_DATA_TABLE(_struct, _name, _parent, _reg, NULL, \
+ SPRD_COMP_CLK_DATA_TABLE(_struct, _name, _parent, _reg, NULL, \
_mshift, _mwidth, _dshift, _dwidth, \
_flags)
+#define SPRD_COMP_CLK_DATA_TABLE_OFFSET(_struct, _name, _parent, _reg, \
+ _table, _mshift, _mwidth, \
+ _doffset, _dshift, _dwidth, \
+ _flags) \
+ SPRD_COMP_CLK_HW_INIT_FN(_struct, _name, _parent, _reg, _table, \
+ _mshift, _mwidth, _doffset, _dshift, \
+ _dwidth, _flags, \
+ CLK_HW_INIT_PARENTS_DATA)
+
+#define SPRD_COMP_CLK_DATA_OFFSET(_struct, _name, _parent, _reg, \
+ _mshift, _mwidth, _doffset, _dshift, \
+ _dwidth, _flags) \
+ SPRD_COMP_CLK_DATA_TABLE_OFFSET(_struct, _name, _parent, _reg, \
+ NULL, _mshift, _mwidth, \
+ _doffset, _dshift, _dwidth, \
+ _flags)
+
static inline struct sprd_comp *hw_to_sprd_comp(const struct clk_hw *hw)
{
struct sprd_clk_common *common = hw_to_sprd_clk_common(hw);
diff --git a/drivers/clk/sprd/div.c b/drivers/clk/sprd/div.c
index c7261630cab4..936782c24127 100644
--- a/drivers/clk/sprd/div.c
+++ b/drivers/clk/sprd/div.c
@@ -25,7 +25,7 @@ unsigned long sprd_div_helper_recalc_rate(struct sprd_clk_common *common,
unsigned long val;
unsigned int reg;
- regmap_read(common->regmap, common->reg, ®);
+ regmap_read(common->regmap, common->reg + div->offset, ®);
val = reg >> div->shift;
val &= (1 << div->width) - 1;
@@ -53,10 +53,10 @@ int sprd_div_helper_set_rate(const struct sprd_clk_common *common,
val = divider_get_val(rate, parent_rate, NULL,
div->width, 0);
- regmap_read(common->regmap, common->reg, ®);
+ regmap_read(common->regmap, common->reg + div->offset, ®);
reg &= ~GENMASK(div->width + div->shift - 1, div->shift);
- regmap_write(common->regmap, common->reg,
+ regmap_write(common->regmap, common->reg + div->offset,
reg | (val << div->shift));
return 0;
diff --git a/drivers/clk/sprd/div.h b/drivers/clk/sprd/div.h
index f5d614b3dcf1..a0bcad80498f 100644
--- a/drivers/clk/sprd/div.h
+++ b/drivers/clk/sprd/div.h
@@ -20,12 +20,14 @@
* classes.
*/
struct sprd_div_internal {
+ s32 offset;
u8 shift;
u8 width;
};
-#define _SPRD_DIV_CLK(_shift, _width) \
+#define _SPRD_DIV_CLK(_offset, _shift, _width) \
{ \
+ .offset = _offset, \
.shift = _shift, \
.width = _width, \
}
@@ -35,10 +37,10 @@ struct sprd_div {
struct sprd_clk_common common;
};
-#define SPRD_DIV_CLK_HW_INIT_FN(_struct, _name, _parent, _reg, \
+#define SPRD_DIV_CLK_HW_INIT_FN(_struct, _name, _parent, _reg, _offset, \
_shift, _width, _flags, _fn) \
struct sprd_div _struct = { \
- .div = _SPRD_DIV_CLK(_shift, _width), \
+ .div = _SPRD_DIV_CLK(_offset, _shift, _width), \
.common = { \
.regmap = NULL, \
.reg = _reg, \
@@ -49,12 +51,17 @@ struct sprd_div {
#define SPRD_DIV_CLK(_struct, _name, _parent, _reg, \
_shift, _width, _flags) \
- SPRD_DIV_CLK_HW_INIT_FN(_struct, _name, _parent, _reg, \
+ SPRD_DIV_CLK_HW_INIT_FN(_struct, _name, _parent, _reg, 0x0, \
_shift, _width, _flags, CLK_HW_INIT)
+#define SPRD_DIV_CLK_FW_NAME(_struct, _name, _parent, _reg, \
+ _shift, _width, _flags) \
+ SPRD_DIV_CLK_HW_INIT_FN(_struct, _name, _parent, _reg, 0x0, \
+ _shift, _width, _flags, CLK_HW_INIT_FW_NAME)
+
#define SPRD_DIV_CLK_HW(_struct, _name, _parent, _reg, \
_shift, _width, _flags) \
- SPRD_DIV_CLK_HW_INIT_FN(_struct, _name, _parent, _reg, \
+ SPRD_DIV_CLK_HW_INIT_FN(_struct, _name, _parent, _reg, 0x0, \
_shift, _width, _flags, CLK_HW_INIT_HW)
static inline struct sprd_div *hw_to_sprd_div(const struct clk_hw *hw)
--
2.17.1
Powered by blists - more mailing lists