[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <a3c8b1eaba0e7aae190cb5f2ffd8a360fab0251c.camel@crapouillou.net>
Date: Wed, 13 Sep 2023 14:01:47 +0200
From: Paul Cercueil <paul@...pouillou.net>
To: Bartosz Golaszewski <brgl@...ev.pl>,
Linus Walleij <linus.walleij@...aro.org>,
Andy Shevchenko <andy@...nel.org>,
Ulf Hansson <ulf.hansson@...aro.org>,
Harvey Hunt <harveyhuntnexus@...il.com>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Richard Weinberger <richard@....at>,
Vignesh Raghavendra <vigneshr@...com>,
Daniel Scally <djrscally@...il.com>,
Hans de Goede <hdegoede@...hat.com>,
Mark Gross <markgross@...nel.org>,
Heiner Kallweit <hkallweit1@...il.com>
Cc: linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-mmc@...r.kernel.org, linux-mips@...r.kernel.org,
linux-mtd@...ts.infradead.org, platform-driver-x86@...r.kernel.org,
Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Subject: Re: [PATCH 2/5] mtd: rawnand: ingenic: use gpiod_set_active_high()
Hi,
Le mercredi 13 septembre 2023 à 13:49 +0200, Bartosz Golaszewski a
écrit :
> From: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
>
> Use the new, less cumbersome interface for setting the GPIO as
> active-high that doesn't require first checking the current state.
>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Works for me.
Acked-by: Paul Cercueil <paul@...pouillou.net>
Cheers,
-Paul
> ---
> drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c | 5 ++---
> 1 file changed, 2 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
> b/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
> index 6748226b8bd1..c055133c45fe 100644
> --- a/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
> +++ b/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
> @@ -388,9 +388,8 @@ static int ingenic_nand_init_chip(struct
> platform_device *pdev,
> * here for older DTs so we can re-use the generic
> nand_gpio_waitrdy()
> * helper, and be consistent with what other drivers do.
> */
> - if (of_machine_is_compatible("qi,lb60") &&
> - gpiod_is_active_low(nand->busy_gpio))
> - gpiod_toggle_active_low(nand->busy_gpio);
> + if (of_machine_is_compatible("qi,lb60"))
> + gpiod_set_active_high(nand->busy_gpio);
>
> nand->wp_gpio = devm_gpiod_get_optional(dev, "wp",
> GPIOD_OUT_LOW);
>
Powered by blists - more mailing lists