[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <fab8908e-ce74-eff0-8e67-6259b3ad5e1e@microchip.com>
Date: Wed, 13 Sep 2023 13:26:56 +0000
From: <Parthiban.Veerasooran@...rochip.com>
To: <krzysztof.kozlowski@...aro.org>
CC: <netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-doc@...r.kernel.org>,
<Horatiu.Vultur@...rochip.com>, <Woojung.Huh@...rochip.com>,
<Nicolas.Ferre@...rochip.com>, <UNGLinuxDriver@...rochip.com>,
<Thorsten.Kummermehr@...rochip.com>, <davem@...emloft.net>,
<edumazet@...gle.com>, <kuba@...nel.org>, <pabeni@...hat.com>,
<robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
<conor+dt@...nel.org>, <corbet@....net>,
<Steen.Hegelund@...rochip.com>, <rdunlap@...radead.org>,
<horms@...nel.org>, <casper.casan@...il.com>, <andrew@...n.ch>
Subject: Re: [RFC PATCH net-next 0/6] Add support for OPEN Alliance 10BASE-T1x
MACPHY Serial Interface
Hi Krzysztof,
On 10/09/23 4:25 pm, Krzysztof Kozlowski wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> On 08/09/2023 16:29, Parthiban Veerasooran wrote:
>> This patch series contain the below updates,
>> - Adds support for OPEN Alliance 10BASE-T1x MACPHY Serial Interface in the
>> net/ethernet/oa_tc6.c.
>> - Adds driver support for Microchip LAN8650/1 Rev.B0 10BASE-T1S MACPHY
>> Ethernet driver in the net/ethernet/microchip/lan865x.c.
>
> And why is this RFC? Do you mean by that it is buggy and not finished,
> so we should not review?
No, this is not a buggy/unfinished patch series. I have added RFC as
this is a new framework is being added in the kernel for supporting OPEN
Alliance 10BASE-T1x MACPHY Serial Interface. So I want to get
opinion/direction/comments from community members. Your valuable review
comments are important to make this framework get added in the mainline.
To get more clarity on this activity, I have described my test setup and
results here. My test setup has two 10BASE-T1S nodes (node 0 and node
1). Node 0 is with LAN8650 MACPHY and node 1 is with EVB-LAN8670-USB.
--------------------------- ----------------------------
| LAN8650 MACPHY (node 0) |<----->| EVB-LAN8670-USB (node 1) |
--------------------------- ----------------------------
LAN8650 MACPHY has a MAC and 10BASE-T1S PHY embedded within a single
chip. SPI interface for Host.
EVB-LAN8670-USB has a LAN9500A USB MAC and LAN8670 10BASE-T1S PHY. USB
interface for Host.
Product links to refer:
LAN8650: https://www.microchip.com/en-us/product/lan8650
EVB-LAN8670-USB: https://www.microchip.com/en-us/development-tool/EV08L38A
Node 0: Acts as PLCA coordinator node.
Node 1: Acts as PLCA drop node.
Note: These products can support CSMA/CD as well.
We have already mainlined EVB-LAN8670-USB drivers. Please refer the
below links.
Driver for LAN9500A USB MAC in the EVB-LAN8670-USB:
https://elixir.bootlin.com/linux/latest/source/drivers/net/usb/smsc95xx.c#L2106
Driver for LAN8670 10BASE-T1S PHY in the EVB-LAN8670-USB:
https://elixir.bootlin.com/linux/latest/source/drivers/net/phy/microchip_t1s.c#L273
Driver for LAN8650 10BASE-T1S MACPHY's Internal PHY:
https://elixir.bootlin.com/linux/latest/source/drivers/net/phy/microchip_t1s.c#L283
Herewith I have attached the ping and iperf3 test results with this
driver for your reference. There are two terminals representing node 0
and node 1. Left terminal is LAN8650 MACPHY and the right one is
EVB-LAN-8670-USB.
ping_test.png: ping test result between two nodes.
iperf3_tx_test.png: iperf3 tx test where node 0 sends data to node 1.
iperf3_rx_test.png: iperf3 rx test where node 1 sends data to node 0.
iperf3_bidirection_test.png: iperf3 bidirectional test where both nodes
are sending and receiving.
Hope this helps to get a clarity on this activity.
Best Regards,
Parthiban V
>
> Best regards,
> Krzysztof
>
>
Download attachment "ping_test.png" of type "image/png" (368489 bytes)
Download attachment "iperf3_tx_test.png" of type "image/png" (166902 bytes)
Download attachment "iperf3_rx_test.png" of type "image/png" (213607 bytes)
Download attachment "iperf3_bidirection_test.png" of type "image/png" (381975 bytes)
Powered by blists - more mailing lists