| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230914172138.11977-9-james.morse@arm.com>
Date: Thu, 14 Sep 2023 17:21:22 +0000
From: James Morse <james.morse@....com>
To: x86@...nel.org, linux-kernel@...r.kernel.org
Cc: Fenghua Yu <fenghua.yu@...el.com>,
Reinette Chatre <reinette.chatre@...el.com>,
Thomas Gleixner <tglx@...utronix.de>,
Ingo Molnar <mingo@...hat.com>, Borislav Petkov <bp@...en8.de>,
H Peter Anvin <hpa@...or.com>,
Babu Moger <Babu.Moger@....com>,
James Morse <james.morse@....com>,
shameerali.kolothum.thodi@...wei.com,
D Scott Phillips OS <scott@...amperecomputing.com>,
carl@...amperecomputing.com, lcherian@...vell.com,
bobo.shaobowang@...wei.com, tan.shaopeng@...itsu.com,
xingxin.hx@...nanolis.org, baolin.wang@...ux.alibaba.com,
Jamie Iles <quic_jiles@...cinc.com>,
Xin Hao <xhao@...ux.alibaba.com>, peternewman@...gle.com,
dfustini@...libre.com, amitsinght@...vell.com
Subject: [PATCH v6 08/24] x86/resctrl: Track the number of dirty RMID a CLOSID has
MPAM's PMG bits extend its PARTID space, meaning the same PMG value can be
used for different control groups.
This means once a CLOSID is allocated, all its monitoring ids may still be
dirty, and held in limbo.
Keep track of the number of RMID held in limbo each CLOSID has. This will
allow a future helper to find the 'cleanest' CLOSID when allocating.
The array is only needed when CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID is
defined. This will never be the case on x86.
Reviewed-by: Shaopeng Tan <tan.shaopeng@...itsu.com>
Tested-by: Shaopeng Tan <tan.shaopeng@...itsu.com>
Tested-By: Peter Newman <peternewman@...gle.com>
Signed-off-by: James Morse <james.morse@....com>
---
Changes since v4:
* Moved closid_num_dirty_rmid[] update under entry->busy check
* Take the mutex in dom_data_init() as the caller doesn't.
Changes since v5:
* Added braces after an else.
* Made closid_num_dirty_rmid an unsigned int.
* Moved mutex_lock() in dom_data_init() to cover the whole function.
---
arch/x86/kernel/cpu/resctrl/monitor.c | 66 +++++++++++++++++++++++----
1 file changed, 56 insertions(+), 10 deletions(-)
diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index d286aba1ee63..0c783301d106 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -51,6 +51,13 @@ struct rmid_entry {
*/
static LIST_HEAD(rmid_free_lru);
+/**
+ * @closid_num_dirty_rmid The number of dirty RMID each CLOSID has.
+ * Only allocated when CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID is defined.
+ * Indexed by CLOSID. Protected by rdtgroup_mutex.
+ */
+static unsigned int *closid_num_dirty_rmid;
+
/**
* @rmid_limbo_count count of currently unused but (potentially)
* dirty RMIDs.
@@ -293,6 +300,17 @@ int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_domain *d,
return 0;
}
+static void limbo_release_entry(struct rmid_entry *entry)
+{
+ lockdep_assert_held(&rdtgroup_mutex);
+
+ rmid_limbo_count--;
+ list_add_tail(&entry->list, &rmid_free_lru);
+
+ if (IS_ENABLED(CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID))
+ closid_num_dirty_rmid[entry->closid]--;
+}
+
/*
* Check the RMIDs that are marked as busy for this domain. If the
* reported LLC occupancy is below the threshold clear the busy bit and
@@ -329,10 +347,8 @@ void __check_limbo(struct rdt_domain *d, bool force_free)
if (force_free || !rmid_dirty) {
clear_bit(idx, d->rmid_busy_llc);
- if (!--entry->busy) {
- rmid_limbo_count--;
- list_add_tail(&entry->list, &rmid_free_lru);
- }
+ if (!--entry->busy)
+ limbo_release_entry(entry);
}
cur_idx = idx + 1;
}
@@ -400,6 +416,8 @@ static void add_rmid_to_limbo(struct rmid_entry *entry)
u64 val = 0;
u32 idx;
+ lockdep_assert_held(&rdtgroup_mutex);
+
idx = resctrl_arch_rmid_idx_encode(entry->closid, entry->rmid);
entry->busy = 0;
@@ -425,10 +443,13 @@ static void add_rmid_to_limbo(struct rmid_entry *entry)
}
put_cpu();
- if (entry->busy)
+ if (entry->busy) {
rmid_limbo_count++;
- else
+ if (IS_ENABLED(CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID))
+ closid_num_dirty_rmid[entry->closid]++;
+ } else {
list_add_tail(&entry->list, &rmid_free_lru);
+ }
}
void free_rmid(u32 closid, u32 rmid)
@@ -796,13 +817,30 @@ void mbm_setup_overflow_handler(struct rdt_domain *dom, unsigned long delay_ms)
static int dom_data_init(struct rdt_resource *r)
{
u32 idx_limit = resctrl_arch_system_num_rmid_idx();
+ u32 num_closid = resctrl_arch_get_num_closid(r);
struct rmid_entry *entry = NULL;
+ int err = 0, i;
u32 idx;
- int i;
+
+ mutex_lock(&rdtgroup_mutex);
+ if (IS_ENABLED(CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID)) {
+ int *tmp;
+
+ tmp = kcalloc(num_closid, sizeof(int), GFP_KERNEL);
+ if (!tmp) {
+ err = -ENOMEM;
+ goto out_unlock;
+ }
+
+ closid_num_dirty_rmid = tmp;
+ }
rmid_ptrs = kcalloc(idx_limit, sizeof(struct rmid_entry), GFP_KERNEL);
- if (!rmid_ptrs)
- return -ENOMEM;
+ if (!rmid_ptrs) {
+ kfree(closid_num_dirty_rmid);
+ err = -ENOMEM;
+ goto out_unlock;
+ }
for (i = 0; i < idx_limit; i++) {
entry = &rmid_ptrs[i];
@@ -822,13 +860,21 @@ static int dom_data_init(struct rdt_resource *r)
entry = __rmid_entry(idx);
list_del(&entry->list);
- return 0;
+out_unlock:
+ mutex_unlock(&rdtgroup_mutex);
+
+ return err;
}
void resctrl_exit_mon_l3_config(struct rdt_resource *r)
{
mutex_lock(&rdtgroup_mutex);
+ if (IS_ENABLED(CONFIG_RESCTRL_RMID_DEPENDS_ON_CLOSID)) {
+ kfree(closid_num_dirty_rmid);
+ closid_num_dirty_rmid = NULL;
+ }
+
kfree(rmid_ptrs);
rmid_ptrs = NULL;
--
2.39.2
Powered by blists - more mailing lists