| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230914014852.683830-1-jcmvbkbc@gmail.com> Date: Wed, 13 Sep 2023 18:48:52 -0700 From: Max Filippov <jcmvbkbc@...il.com> To: linux-kernel@...r.kernel.org Cc: Chris Zankel <chris@...kel.net>, Max Filippov <jcmvbkbc@...il.com> Subject: [PATCH] xtensa: import ESP32S3 core variant Import processor configuration for the Xtensa core found in Espressif ESP32S3 SoC. Signed-off-by: Max Filippov <jcmvbkbc@...il.com> --- .../variants/esp32s3/include/variant/core.h | 681 ++++++++++++++++++ .../esp32s3/include/variant/tie-asm.h | 429 +++++++++++ .../variants/esp32s3/include/variant/tie.h | 207 ++++++ 3 files changed, 1317 insertions(+) create mode 100644 arch/xtensa/variants/esp32s3/include/variant/core.h create mode 100644 arch/xtensa/variants/esp32s3/include/variant/tie-asm.h create mode 100644 arch/xtensa/variants/esp32s3/include/variant/tie.h diff --git a/arch/xtensa/variants/esp32s3/include/variant/core.h b/arch/xtensa/variants/esp32s3/include/variant/core.h new file mode 100644 index 000000000000..6c8fc963c0aa --- /dev/null +++ b/arch/xtensa/variants/esp32s3/include/variant/core.h @@ -0,0 +1,681 @@ +/* + * xtensa/config/core-isa.h -- HAL definitions that are dependent on Xtensa + * processor CORE configuration + * + * See <xtensa/config/core.h>, which includes this file, for more details. + */ + +/* Xtensa processor core configuration information. + + Customer ID=15128; Build=0x90f1f; Copyright (c) 1999-2021 Tensilica Inc. + + Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the + "Software"), to deal in the Software without restriction, including + without limitation the rights to use, copy, modify, merge, publish, + distribute, sublicense, and/or sell copies of the Software, and to + permit persons to whom the Software is furnished to do so, subject to + the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. + IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY + CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE + SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ + +#ifndef _XTENSA_CORE_CONFIGURATION_H +#define _XTENSA_CORE_CONFIGURATION_H + + +/**************************************************************************** + Parameters Useful for Any Code, USER or PRIVILEGED + ****************************************************************************/ + +/* + * Note: Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is + * configured, and a value of 0 otherwise. These macros are always defined. + */ + + +/*---------------------------------------------------------------------- + ISA + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_BE 0 /* big-endian byte ordering */ +#define XCHAL_HAVE_WINDOWED 1 /* windowed registers option */ +#define XCHAL_NUM_AREGS 64 /* num of physical addr regs */ +#define XCHAL_NUM_AREGS_LOG2 6 /* log2(XCHAL_NUM_AREGS) */ +#define XCHAL_MAX_INSTRUCTION_SIZE 4 /* max instr bytes (3..8) */ +#define XCHAL_HAVE_DEBUG 1 /* debug option */ +#define XCHAL_HAVE_DENSITY 1 /* 16-bit instructions */ +#define XCHAL_HAVE_LOOPS 1 /* zero-overhead loops */ +#define XCHAL_LOOP_BUFFER_SIZE 256 /* zero-ov. loop instr buffer size */ +#define XCHAL_HAVE_NSA 1 /* NSA/NSAU instructions */ +#define XCHAL_HAVE_MINMAX 1 /* MIN/MAX instructions */ +#define XCHAL_HAVE_SEXT 1 /* SEXT instruction */ +#define XCHAL_HAVE_DEPBITS 0 /* DEPBITS instruction */ +#define XCHAL_HAVE_CLAMPS 1 /* CLAMPS instruction */ +#define XCHAL_HAVE_MUL16 1 /* MUL16S/MUL16U instructions */ +#define XCHAL_HAVE_MUL32 1 /* MULL instruction */ +#define XCHAL_HAVE_MUL32_HIGH 1 /* MULUH/MULSH instructions */ +#define XCHAL_HAVE_DIV32 1 /* QUOS/QUOU/REMS/REMU instructions */ +#define XCHAL_HAVE_L32R 1 /* L32R instruction */ +#define XCHAL_HAVE_ABSOLUTE_LITERALS 0 /* non-PC-rel (extended) L32R */ +#define XCHAL_HAVE_CONST16 0 /* CONST16 instruction */ +#define XCHAL_HAVE_ADDX 1 /* ADDX#/SUBX# instructions */ +#define XCHAL_HAVE_EXCLUSIVE 0 /* L32EX/S32EX instructions */ +#define XCHAL_HAVE_WIDE_BRANCHES 0 /* B*.W18 or B*.W15 instr's */ +#define XCHAL_HAVE_PREDICTED_BRANCHES 0 /* B[EQ/EQZ/NE/NEZ]T instr's */ +#define XCHAL_HAVE_CALL4AND12 1 /* (obsolete option) */ +#define XCHAL_HAVE_ABS 1 /* ABS instruction */ +/*#define XCHAL_HAVE_POPC 0*/ /* POPC instruction */ +/*#define XCHAL_HAVE_CRC 0*/ /* CRC instruction */ +#define XCHAL_HAVE_RELEASE_SYNC 1 /* L32AI/S32RI instructions */ +#define XCHAL_HAVE_S32C1I 1 /* S32C1I instruction */ +#define XCHAL_HAVE_SPECULATION 0 /* speculation */ +#define XCHAL_HAVE_FULL_RESET 1 /* all regs/state reset */ +#define XCHAL_NUM_CONTEXTS 1 /* */ +#define XCHAL_NUM_MISC_REGS 4 /* num of scratch regs (0..4) */ +#define XCHAL_HAVE_TAP_MASTER 0 /* JTAG TAP control instr's */ +#define XCHAL_HAVE_PRID 1 /* processor ID register */ +#define XCHAL_HAVE_EXTERN_REGS 1 /* WER/RER instructions */ +#define XCHAL_HAVE_MX 0 /* MX core (Tensilica internal) */ +#define XCHAL_HAVE_MP_INTERRUPTS 0 /* interrupt distributor port */ +#define XCHAL_HAVE_MP_RUNSTALL 0 /* core RunStall control port */ +#define XCHAL_HAVE_PSO 0 /* Power Shut-Off */ +#define XCHAL_HAVE_PSO_CDM 0 /* core/debug/mem pwr domains */ +#define XCHAL_HAVE_PSO_FULL_RETENTION 0 /* all regs preserved on PSO */ +#define XCHAL_HAVE_THREADPTR 1 /* THREADPTR register */ +#define XCHAL_HAVE_BOOLEANS 1 /* boolean registers */ +#define XCHAL_HAVE_CP 1 /* CPENABLE reg (coprocessor) */ +#define XCHAL_CP_MAXCFG 8 /* max allowed cp id plus one */ +#define XCHAL_HAVE_MAC16 1 /* MAC16 package */ + +#define XCHAL_HAVE_FUSION 0 /* Fusion*/ +#define XCHAL_HAVE_FUSION_FP 0 /* Fusion FP option */ +#define XCHAL_HAVE_FUSION_LOW_POWER 0 /* Fusion Low Power option */ +#define XCHAL_HAVE_FUSION_AES 0 /* Fusion BLE/Wifi AES-128 CCM option */ +#define XCHAL_HAVE_FUSION_CONVENC 0 /* Fusion Conv Encode option */ +#define XCHAL_HAVE_FUSION_LFSR_CRC 0 /* Fusion LFSR-CRC option */ +#define XCHAL_HAVE_FUSION_BITOPS 0 /* Fusion Bit Operations Support option */ +#define XCHAL_HAVE_FUSION_AVS 0 /* Fusion AVS option */ +#define XCHAL_HAVE_FUSION_16BIT_BASEBAND 0 /* Fusion 16-bit Baseband option */ +#define XCHAL_HAVE_FUSION_VITERBI 0 /* Fusion Viterbi option */ +#define XCHAL_HAVE_FUSION_SOFTDEMAP 0 /* Fusion Soft Bit Demap option */ +#define XCHAL_HAVE_HIFIPRO 0 /* HiFiPro Audio Engine pkg */ +#define XCHAL_HAVE_HIFI5 0 /* HiFi5 Audio Engine pkg */ +#define XCHAL_HAVE_HIFI5_NN_MAC 0 /* HiFi5 Audio Engine NN-MAC option */ +#define XCHAL_HAVE_HIFI5_VFPU 0 /* HiFi5 Audio Engine Single-Precision VFPU option */ +#define XCHAL_HAVE_HIFI5_HP_VFPU 0 /* HiFi5 Audio Engine Half-Precision VFPU option */ +#define XCHAL_HAVE_HIFI4 0 /* HiFi4 Audio Engine pkg */ +#define XCHAL_HAVE_HIFI4_VFPU 0 /* HiFi4 Audio Engine VFPU option */ +#define XCHAL_HAVE_HIFI3 0 /* HiFi3 Audio Engine pkg */ +#define XCHAL_HAVE_HIFI3_VFPU 0 /* HiFi3 Audio Engine VFPU option */ +#define XCHAL_HAVE_HIFI3Z 0 /* HiFi3Z Audio Engine pkg */ +#define XCHAL_HAVE_HIFI3Z_VFPU 0 /* HiFi3Z Audio Engine VFPU option */ +#define XCHAL_HAVE_HIFI2 0 /* HiFi2 Audio Engine pkg */ +#define XCHAL_HAVE_HIFI2EP 0 /* HiFi2EP */ +#define XCHAL_HAVE_HIFI_MINI 0 + + + +#define XCHAL_HAVE_VECTORFPU2005 0 /* vector floating-point pkg */ +#define XCHAL_HAVE_USER_DPFPU 0 /* user DP floating-point pkg */ +#define XCHAL_HAVE_USER_SPFPU 0 /* user SP floating-point pkg */ +#define XCHAL_HAVE_FP 1 /* single prec floating point */ +#define XCHAL_HAVE_FP_DIV 1 /* FP with DIV instructions */ +#define XCHAL_HAVE_FP_RECIP 1 /* FP with RECIP instructions */ +#define XCHAL_HAVE_FP_SQRT 1 /* FP with SQRT instructions */ +#define XCHAL_HAVE_FP_RSQRT 1 /* FP with RSQRT instructions */ +#define XCHAL_HAVE_DFP 0 /* double precision FP pkg */ +#define XCHAL_HAVE_DFP_DIV 0 /* DFP with DIV instructions */ +#define XCHAL_HAVE_DFP_RECIP 0 /* DFP with RECIP instructions*/ +#define XCHAL_HAVE_DFP_SQRT 0 /* DFP with SQRT instructions */ +#define XCHAL_HAVE_DFP_RSQRT 0 /* DFP with RSQRT instructions*/ +#define XCHAL_HAVE_DFP_ACCEL 0 /* double precision FP acceleration pkg */ +#define XCHAL_HAVE_DFP_accel XCHAL_HAVE_DFP_ACCEL /* for backward compatibility */ + +#define XCHAL_HAVE_DFPU_SINGLE_ONLY 1 /* DFPU Coprocessor, single precision only */ +#define XCHAL_HAVE_DFPU_SINGLE_DOUBLE 0 /* DFPU Coprocessor, single and double precision */ +#define XCHAL_HAVE_VECTRA1 0 /* Vectra I pkg */ +#define XCHAL_HAVE_VECTRALX 0 /* Vectra LX pkg */ + +#define XCHAL_HAVE_FUSIONG 0 /* FusionG */ +#define XCHAL_HAVE_FUSIONG3 0 /* FusionG3 */ +#define XCHAL_HAVE_FUSIONG6 0 /* FusionG6 */ +#define XCHAL_HAVE_FUSIONG_SP_VFPU 0 /* sp_vfpu option on FusionG */ +#define XCHAL_HAVE_FUSIONG_DP_VFPU 0 /* dp_vfpu option on FusionG */ +#define XCHAL_FUSIONG_SIMD32 0 /* simd32 for FusionG */ + +#define XCHAL_HAVE_PDX 0 /* PDX */ +#define XCHAL_PDX_SIMD32 0 /* simd32 for PDX */ +#define XCHAL_HAVE_PDX4 0 /* PDX4 */ +#define XCHAL_HAVE_PDX8 0 /* PDX8 */ +#define XCHAL_HAVE_PDX16 0 /* PDX16 */ + +#define XCHAL_HAVE_CONNXD2 0 /* ConnX D2 pkg */ +#define XCHAL_HAVE_CONNXD2_DUALLSFLIX 0 /* ConnX D2 & Dual LoadStore Flix */ +#define XCHAL_HAVE_BBE16 0 /* ConnX BBE16 pkg */ +#define XCHAL_HAVE_BBE16_RSQRT 0 /* BBE16 & vector recip sqrt */ +#define XCHAL_HAVE_BBE16_VECDIV 0 /* BBE16 & vector divide */ +#define XCHAL_HAVE_BBE16_DESPREAD 0 /* BBE16 & despread */ +#define XCHAL_HAVE_BBENEP 0 /* ConnX BBENEP pkgs */ +#define XCHAL_HAVE_BBENEP_SP_VFPU 0 /* sp_vfpu option on BBE-EP */ +#define XCHAL_HAVE_BSP3 0 /* ConnX BSP3 pkg */ +#define XCHAL_HAVE_BSP3_TRANSPOSE 0 /* BSP3 & transpose32x32 */ +#define XCHAL_HAVE_SSP16 0 /* ConnX SSP16 pkg */ +#define XCHAL_HAVE_SSP16_VITERBI 0 /* SSP16 & viterbi */ +#define XCHAL_HAVE_TURBO16 0 /* ConnX Turbo16 pkg */ +#define XCHAL_HAVE_BBP16 0 /* ConnX BBP16 pkg */ +#define XCHAL_HAVE_FLIX3 0 /* basic 3-way FLIX option */ +#define XCHAL_HAVE_GRIVPEP 0 /* General Release of IVPEP */ +#define XCHAL_HAVE_GRIVPEP_HISTOGRAM 0 /* Histogram option on GRIVPEP */ + +#define XCHAL_HAVE_VISION 0 /* Vision P5/P6 */ +#define XCHAL_VISION_SIMD16 0 /* simd16 for Vision P5/P6 */ +#define XCHAL_VISION_TYPE 0 /* Vision P5, P6, or P3 */ +#define XCHAL_VISION_QUAD_MAC_TYPE 0 /* quad_mac option on Vision P6 */ +#define XCHAL_HAVE_VISION_HISTOGRAM 0 /* histogram option on Vision P5/P6 */ +#define XCHAL_HAVE_VISION_SP_VFPU 0 /* sp_vfpu option on Vision P5/P6 */ +#define XCHAL_HAVE_VISION_HP_VFPU 0 /* hp_vfpu option on Vision P6 */ + +#define XCHAL_HAVE_VISIONC 0 /* Vision C */ + +/*---------------------------------------------------------------------- + MISC + ----------------------------------------------------------------------*/ + +#define XCHAL_NUM_LOADSTORE_UNITS 1 /* load/store units */ +#define XCHAL_NUM_WRITEBUFFER_ENTRIES 4 /* size of write buffer */ +#define XCHAL_INST_FETCH_WIDTH 4 /* instr-fetch width in bytes */ +#define XCHAL_DATA_WIDTH 16 /* data width in bytes */ +#define XCHAL_DATA_PIPE_DELAY 1 /* d-side pipeline delay + (1 = 5-stage, 2 = 7-stage) */ +#define XCHAL_CLOCK_GATING_GLOBAL 1 /* global clock gating */ +#define XCHAL_CLOCK_GATING_FUNCUNIT 1 /* funct. unit clock gating */ +/* In T1050, applies to selected core load and store instructions (see ISA): */ +#define XCHAL_UNALIGNED_LOAD_EXCEPTION 0 /* unaligned loads cause exc. */ +#define XCHAL_UNALIGNED_STORE_EXCEPTION 0 /* unaligned stores cause exc.*/ +#define XCHAL_UNALIGNED_LOAD_HW 1 /* unaligned loads work in hw */ +#define XCHAL_UNALIGNED_STORE_HW 1 /* unaligned stores work in hw*/ + +#define XCHAL_SW_VERSION 1200012 /* sw version of this header */ + +#define XCHAL_CORE_ID "LX7_ESP32_S3_MP" /* alphanum core name + (CoreID) set in the Xtensa + Processor Generator */ + +#define XCHAL_BUILD_UNIQUE_ID 0x00090F1F /* 22-bit sw build ID */ + +/* + * These definitions describe the hardware targeted by this software. + */ +#define XCHAL_HW_CONFIGID0 0xC2F0FFFE /* ConfigID hi 32 bits*/ +#define XCHAL_HW_CONFIGID1 0x23090F1F /* ConfigID lo 32 bits*/ +#define XCHAL_HW_VERSION_NAME "LX7.0.12" /* full version name */ +#define XCHAL_HW_VERSION_MAJOR 2700 /* major ver# of targeted hw */ +#define XCHAL_HW_VERSION_MINOR 12 /* minor ver# of targeted hw */ +#define XCHAL_HW_VERSION 270012 /* major*100+minor */ +#define XCHAL_HW_REL_LX7 1 +#define XCHAL_HW_REL_LX7_0 1 +#define XCHAL_HW_REL_LX7_0_12 1 +#define XCHAL_HW_CONFIGID_RELIABLE 1 +/* If software targets a *range* of hardware versions, these are the bounds: */ +#define XCHAL_HW_MIN_VERSION_MAJOR 2700 /* major v of earliest tgt hw */ +#define XCHAL_HW_MIN_VERSION_MINOR 12 /* minor v of earliest tgt hw */ +#define XCHAL_HW_MIN_VERSION 270012 /* earliest targeted hw */ +#define XCHAL_HW_MAX_VERSION_MAJOR 2700 /* major v of latest tgt hw */ +#define XCHAL_HW_MAX_VERSION_MINOR 12 /* minor v of latest tgt hw */ +#define XCHAL_HW_MAX_VERSION 270012 /* latest targeted hw */ + + +/*---------------------------------------------------------------------- + CACHE + ----------------------------------------------------------------------*/ + +#define XCHAL_ICACHE_LINESIZE 4 /* I-cache line size in bytes */ +#define XCHAL_DCACHE_LINESIZE 16 /* D-cache line size in bytes */ +#define XCHAL_ICACHE_LINEWIDTH 2 /* log2(I line size in bytes) */ +#define XCHAL_DCACHE_LINEWIDTH 4 /* log2(D line size in bytes) */ + +#define XCHAL_ICACHE_SIZE 0 /* I-cache size in bytes or 0 */ +#define XCHAL_DCACHE_SIZE 0 /* D-cache size in bytes or 0 */ + +#define XCHAL_DCACHE_IS_WRITEBACK 0 /* writeback feature */ +#define XCHAL_DCACHE_IS_COHERENT 0 /* MP coherence feature */ + +#define XCHAL_HAVE_PREFETCH 0 /* PREFCTL register */ +#define XCHAL_HAVE_PREFETCH_L1 0 /* prefetch to L1 dcache */ +#define XCHAL_PREFETCH_CASTOUT_LINES 0 /* dcache pref. castout bufsz */ +#define XCHAL_PREFETCH_ENTRIES 0 /* cache prefetch entries */ +#define XCHAL_PREFETCH_BLOCK_ENTRIES 0 /* prefetch block streams */ +#define XCHAL_HAVE_CACHE_BLOCKOPS 0 /* block prefetch for caches */ +#define XCHAL_HAVE_ICACHE_TEST 0 /* Icache test instructions */ +#define XCHAL_HAVE_DCACHE_TEST 0 /* Dcache test instructions */ +#define XCHAL_HAVE_ICACHE_DYN_WAYS 0 /* Icache dynamic way support */ +#define XCHAL_HAVE_DCACHE_DYN_WAYS 0 /* Dcache dynamic way support */ + + + + +/**************************************************************************** + Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code + ****************************************************************************/ + + +#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY + +/*---------------------------------------------------------------------- + CACHE + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_PIF 1 /* any outbound bus present */ + +#define XCHAL_HAVE_AXI 0 /* AXI bus */ +#define XCHAL_HAVE_AXI_ECC 0 /* ECC on AXI bus */ +#define XCHAL_HAVE_ACELITE 0 /* ACELite bus */ + +#define XCHAL_HAVE_PIF_WR_RESP 0 /* pif write response */ +#define XCHAL_HAVE_PIF_REQ_ATTR 1 /* pif attribute */ + +/* If present, cache size in bytes == (ways * 2^(linewidth + setwidth)). */ + +/* Number of cache sets in log2(lines per way): */ +#define XCHAL_ICACHE_SETWIDTH 0 +#define XCHAL_DCACHE_SETWIDTH 0 + +/* Cache set associativity (number of ways): */ +#define XCHAL_ICACHE_WAYS 1 +#define XCHAL_DCACHE_WAYS 1 + +/* Cache features: */ +#define XCHAL_ICACHE_LINE_LOCKABLE 0 +#define XCHAL_DCACHE_LINE_LOCKABLE 0 +#define XCHAL_ICACHE_ECC_PARITY 0 +#define XCHAL_DCACHE_ECC_PARITY 0 +#define XCHAL_ICACHE_ECC_WIDTH 1 +#define XCHAL_DCACHE_ECC_WIDTH 1 + +/* Cache access size in bytes (affects operation of SICW instruction): */ +#define XCHAL_ICACHE_ACCESS_SIZE 1 +#define XCHAL_DCACHE_ACCESS_SIZE 1 + +#define XCHAL_DCACHE_BANKS 0 /* number of banks */ + +/* Number of encoded cache attr bits (see <xtensa/hal.h> for decoded bits): */ +#define XCHAL_CA_BITS 4 + + +/*---------------------------------------------------------------------- + INTERNAL I/D RAM/ROMs and XLMI + ----------------------------------------------------------------------*/ +#define XCHAL_NUM_INSTROM 0 /* number of core instr. ROMs */ +#define XCHAL_NUM_INSTRAM 1 /* number of core instr. RAMs */ +#define XCHAL_NUM_DATAROM 0 /* number of core data ROMs */ +#define XCHAL_NUM_DATARAM 1 /* number of core data RAMs */ +#define XCHAL_NUM_URAM 0 /* number of core unified RAMs*/ +#define XCHAL_NUM_XLMI 0 /* number of core XLMI ports */ + +/* Instruction RAM 0: */ +#define XCHAL_INSTRAM0_VADDR 0x40000000 /* virtual address */ +#define XCHAL_INSTRAM0_PADDR 0x40000000 /* physical address */ +#define XCHAL_INSTRAM0_SIZE 67108864 /* size in bytes */ +#define XCHAL_INSTRAM0_ECC_PARITY 0 /* ECC/parity type, 0=none */ +#define XCHAL_HAVE_INSTRAM0 1 +#define XCHAL_INSTRAM0_HAVE_IDMA 0 /* idma supported by this local memory */ + +/* Data RAM 0: */ +#define XCHAL_DATARAM0_VADDR 0x3C000000 /* virtual address */ +#define XCHAL_DATARAM0_PADDR 0x3C000000 /* physical address */ +#define XCHAL_DATARAM0_SIZE 67108864 /* size in bytes */ +#define XCHAL_DATARAM0_ECC_PARITY 0 /* ECC/parity type, 0=none */ +#define XCHAL_DATARAM0_BANKS 1 /* number of banks */ +#define XCHAL_HAVE_DATARAM0 1 +#define XCHAL_DATARAM0_HAVE_IDMA 0 /* idma supported by this local memory */ + +#define XCHAL_HAVE_IDMA 0 +#define XCHAL_HAVE_IDMA_TRANSPOSE 0 + +#define XCHAL_HAVE_IMEM_LOADSTORE 1 /* can load/store to IROM/IRAM*/ + + +/*---------------------------------------------------------------------- + INTERRUPTS and TIMERS + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_INTERRUPTS 1 /* interrupt option */ +#define XCHAL_HAVE_HIGHPRI_INTERRUPTS 1 /* med/high-pri. interrupts */ +#define XCHAL_HAVE_NMI 1 /* non-maskable interrupt */ +#define XCHAL_HAVE_CCOUNT 1 /* CCOUNT reg. (timer option) */ +#define XCHAL_NUM_TIMERS 3 /* number of CCOMPAREn regs */ +#define XCHAL_NUM_INTERRUPTS 32 /* number of interrupts */ +#define XCHAL_NUM_INTERRUPTS_LOG2 5 /* ceil(log2(NUM_INTERRUPTS)) */ +#define XCHAL_NUM_EXTINTERRUPTS 26 /* num of external interrupts */ +#define XCHAL_NUM_INTLEVELS 6 /* number of interrupt levels + (not including level zero) */ +#define XCHAL_EXCM_LEVEL 3 /* level masked by PS.EXCM */ + /* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */ + +/* Masks of interrupts at each interrupt level: */ +#define XCHAL_INTLEVEL1_MASK 0x000637FF +#define XCHAL_INTLEVEL2_MASK 0x00380000 +#define XCHAL_INTLEVEL3_MASK 0x28C08800 +#define XCHAL_INTLEVEL4_MASK 0x53000000 +#define XCHAL_INTLEVEL5_MASK 0x84010000 +#define XCHAL_INTLEVEL6_MASK 0x00000000 +#define XCHAL_INTLEVEL7_MASK 0x00004000 + +/* Masks of interrupts at each range 1..n of interrupt levels: */ +#define XCHAL_INTLEVEL1_ANDBELOW_MASK 0x000637FF +#define XCHAL_INTLEVEL2_ANDBELOW_MASK 0x003E37FF +#define XCHAL_INTLEVEL3_ANDBELOW_MASK 0x28FEBFFF +#define XCHAL_INTLEVEL4_ANDBELOW_MASK 0x7BFEBFFF +#define XCHAL_INTLEVEL5_ANDBELOW_MASK 0xFFFFBFFF +#define XCHAL_INTLEVEL6_ANDBELOW_MASK 0xFFFFBFFF +#define XCHAL_INTLEVEL7_ANDBELOW_MASK 0xFFFFFFFF + +/* Level of each interrupt: */ +#define XCHAL_INT0_LEVEL 1 +#define XCHAL_INT1_LEVEL 1 +#define XCHAL_INT2_LEVEL 1 +#define XCHAL_INT3_LEVEL 1 +#define XCHAL_INT4_LEVEL 1 +#define XCHAL_INT5_LEVEL 1 +#define XCHAL_INT6_LEVEL 1 +#define XCHAL_INT7_LEVEL 1 +#define XCHAL_INT8_LEVEL 1 +#define XCHAL_INT9_LEVEL 1 +#define XCHAL_INT10_LEVEL 1 +#define XCHAL_INT11_LEVEL 3 +#define XCHAL_INT12_LEVEL 1 +#define XCHAL_INT13_LEVEL 1 +#define XCHAL_INT14_LEVEL 7 +#define XCHAL_INT15_LEVEL 3 +#define XCHAL_INT16_LEVEL 5 +#define XCHAL_INT17_LEVEL 1 +#define XCHAL_INT18_LEVEL 1 +#define XCHAL_INT19_LEVEL 2 +#define XCHAL_INT20_LEVEL 2 +#define XCHAL_INT21_LEVEL 2 +#define XCHAL_INT22_LEVEL 3 +#define XCHAL_INT23_LEVEL 3 +#define XCHAL_INT24_LEVEL 4 +#define XCHAL_INT25_LEVEL 4 +#define XCHAL_INT26_LEVEL 5 +#define XCHAL_INT27_LEVEL 3 +#define XCHAL_INT28_LEVEL 4 +#define XCHAL_INT29_LEVEL 3 +#define XCHAL_INT30_LEVEL 4 +#define XCHAL_INT31_LEVEL 5 +#define XCHAL_DEBUGLEVEL 6 /* debug interrupt level */ +#define XCHAL_HAVE_DEBUG_EXTERN_INT 1 /* OCD external db interrupt */ +#define XCHAL_NMILEVEL 7 /* NMI "level" (for use with + EXCSAVE/EPS/EPC_n, RFI n) */ + +/* Type of each interrupt: */ +#define XCHAL_INT0_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT1_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT2_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT3_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT4_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT5_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT6_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT7_TYPE XTHAL_INTTYPE_SOFTWARE +#define XCHAL_INT8_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT9_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT10_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT11_TYPE XTHAL_INTTYPE_PROFILING +#define XCHAL_INT12_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT13_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT14_TYPE XTHAL_INTTYPE_NMI +#define XCHAL_INT15_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT16_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT17_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT18_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT19_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT20_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT21_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT22_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT23_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT24_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT25_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT26_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT27_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT28_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT29_TYPE XTHAL_INTTYPE_SOFTWARE +#define XCHAL_INT30_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT31_TYPE XTHAL_INTTYPE_EXTERN_LEVEL + +/* Masks of interrupts for each type of interrupt: */ +#define XCHAL_INTTYPE_MASK_UNCONFIGURED 0x00000000 +#define XCHAL_INTTYPE_MASK_SOFTWARE 0x20000080 +#define XCHAL_INTTYPE_MASK_EXTERN_EDGE 0x50400400 +#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL 0x8FBE333F +#define XCHAL_INTTYPE_MASK_TIMER 0x00018040 +#define XCHAL_INTTYPE_MASK_NMI 0x00004000 +#define XCHAL_INTTYPE_MASK_WRITE_ERROR 0x00000000 +#define XCHAL_INTTYPE_MASK_PROFILING 0x00000800 +#define XCHAL_INTTYPE_MASK_IDMA_DONE 0x00000000 +#define XCHAL_INTTYPE_MASK_IDMA_ERR 0x00000000 +#define XCHAL_INTTYPE_MASK_GS_ERR 0x00000000 + +/* Interrupt numbers assigned to specific interrupt sources: */ +#define XCHAL_TIMER0_INTERRUPT 6 /* CCOMPARE0 */ +#define XCHAL_TIMER1_INTERRUPT 15 /* CCOMPARE1 */ +#define XCHAL_TIMER2_INTERRUPT 16 /* CCOMPARE2 */ +#define XCHAL_TIMER3_INTERRUPT XTHAL_TIMER_UNCONFIGURED +#define XCHAL_NMI_INTERRUPT 14 /* non-maskable interrupt */ +#define XCHAL_PROFILING_INTERRUPT 11 + +/* Interrupt numbers for levels at which only one interrupt is configured: */ +#define XCHAL_INTLEVEL7_NUM 14 +/* (There are many interrupts each at level(s) 1, 2, 3, 4, 5.) */ + + +/* + * External interrupt mapping. + * These macros describe how Xtensa processor interrupt numbers + * (as numbered internally, eg. in INTERRUPT and INTENABLE registers) + * map to external BInterrupt<n> pins, for those interrupts + * configured as external (level-triggered, edge-triggered, or NMI). + * See the Xtensa processor databook for more details. + */ + +/* Core interrupt numbers mapped to each EXTERNAL BInterrupt pin number: */ +#define XCHAL_EXTINT0_NUM 0 /* (intlevel 1) */ +#define XCHAL_EXTINT1_NUM 1 /* (intlevel 1) */ +#define XCHAL_EXTINT2_NUM 2 /* (intlevel 1) */ +#define XCHAL_EXTINT3_NUM 3 /* (intlevel 1) */ +#define XCHAL_EXTINT4_NUM 4 /* (intlevel 1) */ +#define XCHAL_EXTINT5_NUM 5 /* (intlevel 1) */ +#define XCHAL_EXTINT6_NUM 8 /* (intlevel 1) */ +#define XCHAL_EXTINT7_NUM 9 /* (intlevel 1) */ +#define XCHAL_EXTINT8_NUM 10 /* (intlevel 1) */ +#define XCHAL_EXTINT9_NUM 12 /* (intlevel 1) */ +#define XCHAL_EXTINT10_NUM 13 /* (intlevel 1) */ +#define XCHAL_EXTINT11_NUM 14 /* (intlevel 7) */ +#define XCHAL_EXTINT12_NUM 17 /* (intlevel 1) */ +#define XCHAL_EXTINT13_NUM 18 /* (intlevel 1) */ +#define XCHAL_EXTINT14_NUM 19 /* (intlevel 2) */ +#define XCHAL_EXTINT15_NUM 20 /* (intlevel 2) */ +#define XCHAL_EXTINT16_NUM 21 /* (intlevel 2) */ +#define XCHAL_EXTINT17_NUM 22 /* (intlevel 3) */ +#define XCHAL_EXTINT18_NUM 23 /* (intlevel 3) */ +#define XCHAL_EXTINT19_NUM 24 /* (intlevel 4) */ +#define XCHAL_EXTINT20_NUM 25 /* (intlevel 4) */ +#define XCHAL_EXTINT21_NUM 26 /* (intlevel 5) */ +#define XCHAL_EXTINT22_NUM 27 /* (intlevel 3) */ +#define XCHAL_EXTINT23_NUM 28 /* (intlevel 4) */ +#define XCHAL_EXTINT24_NUM 30 /* (intlevel 4) */ +#define XCHAL_EXTINT25_NUM 31 /* (intlevel 5) */ +/* EXTERNAL BInterrupt pin numbers mapped to each core interrupt number: */ +#define XCHAL_INT0_EXTNUM 0 /* (intlevel 1) */ +#define XCHAL_INT1_EXTNUM 1 /* (intlevel 1) */ +#define XCHAL_INT2_EXTNUM 2 /* (intlevel 1) */ +#define XCHAL_INT3_EXTNUM 3 /* (intlevel 1) */ +#define XCHAL_INT4_EXTNUM 4 /* (intlevel 1) */ +#define XCHAL_INT5_EXTNUM 5 /* (intlevel 1) */ +#define XCHAL_INT8_EXTNUM 6 /* (intlevel 1) */ +#define XCHAL_INT9_EXTNUM 7 /* (intlevel 1) */ +#define XCHAL_INT10_EXTNUM 8 /* (intlevel 1) */ +#define XCHAL_INT12_EXTNUM 9 /* (intlevel 1) */ +#define XCHAL_INT13_EXTNUM 10 /* (intlevel 1) */ +#define XCHAL_INT14_EXTNUM 11 /* (intlevel 7) */ +#define XCHAL_INT17_EXTNUM 12 /* (intlevel 1) */ +#define XCHAL_INT18_EXTNUM 13 /* (intlevel 1) */ +#define XCHAL_INT19_EXTNUM 14 /* (intlevel 2) */ +#define XCHAL_INT20_EXTNUM 15 /* (intlevel 2) */ +#define XCHAL_INT21_EXTNUM 16 /* (intlevel 2) */ +#define XCHAL_INT22_EXTNUM 17 /* (intlevel 3) */ +#define XCHAL_INT23_EXTNUM 18 /* (intlevel 3) */ +#define XCHAL_INT24_EXTNUM 19 /* (intlevel 4) */ +#define XCHAL_INT25_EXTNUM 20 /* (intlevel 4) */ +#define XCHAL_INT26_EXTNUM 21 /* (intlevel 5) */ +#define XCHAL_INT27_EXTNUM 22 /* (intlevel 3) */ +#define XCHAL_INT28_EXTNUM 23 /* (intlevel 4) */ +#define XCHAL_INT30_EXTNUM 24 /* (intlevel 4) */ +#define XCHAL_INT31_EXTNUM 25 /* (intlevel 5) */ + + +/*---------------------------------------------------------------------- + EXCEPTIONS and VECTORS + ----------------------------------------------------------------------*/ + +#define XCHAL_XEA_VERSION 2 /* Xtensa Exception Architecture + number: 1 == XEA1 (old) + 2 == XEA2 (new) + 0 == XEAX (extern) or TX */ +#define XCHAL_HAVE_XEA1 0 /* Exception Architecture 1 */ +#define XCHAL_HAVE_XEA2 1 /* Exception Architecture 2 */ +#define XCHAL_HAVE_XEAX 0 /* External Exception Arch. */ +#define XCHAL_HAVE_EXCEPTIONS 1 /* exception option */ +#define XCHAL_HAVE_HALT 0 /* halt architecture option */ +#define XCHAL_HAVE_BOOTLOADER 0 /* boot loader (for TX) */ +#define XCHAL_HAVE_MEM_ECC_PARITY 0 /* local memory ECC/parity */ +#define XCHAL_HAVE_VECTOR_SELECT 1 /* relocatable vectors */ +#define XCHAL_HAVE_VECBASE 1 /* relocatable vectors */ +#define XCHAL_VECBASE_RESET_VADDR 0x40000000 /* VECBASE reset value */ +#define XCHAL_VECBASE_RESET_PADDR 0x40000000 +#define XCHAL_RESET_VECBASE_OVERLAP 0 + +#define XCHAL_RESET_VECTOR0_VADDR 0x50000000 +#define XCHAL_RESET_VECTOR0_PADDR 0x50000000 +#define XCHAL_RESET_VECTOR1_VADDR 0x40000400 +#define XCHAL_RESET_VECTOR1_PADDR 0x40000400 +#define XCHAL_RESET_VECTOR_VADDR 0x40000400 +#define XCHAL_RESET_VECTOR_PADDR 0x40000400 +#define XCHAL_USER_VECOFS 0x00000340 +#define XCHAL_USER_VECTOR_VADDR 0x40000340 +#define XCHAL_USER_VECTOR_PADDR 0x40000340 +#define XCHAL_KERNEL_VECOFS 0x00000300 +#define XCHAL_KERNEL_VECTOR_VADDR 0x40000300 +#define XCHAL_KERNEL_VECTOR_PADDR 0x40000300 +#define XCHAL_DOUBLEEXC_VECOFS 0x000003C0 +#define XCHAL_DOUBLEEXC_VECTOR_VADDR 0x400003C0 +#define XCHAL_DOUBLEEXC_VECTOR_PADDR 0x400003C0 +#define XCHAL_WINDOW_OF4_VECOFS 0x00000000 +#define XCHAL_WINDOW_UF4_VECOFS 0x00000040 +#define XCHAL_WINDOW_OF8_VECOFS 0x00000080 +#define XCHAL_WINDOW_UF8_VECOFS 0x000000C0 +#define XCHAL_WINDOW_OF12_VECOFS 0x00000100 +#define XCHAL_WINDOW_UF12_VECOFS 0x00000140 +#define XCHAL_WINDOW_VECTORS_VADDR 0x40000000 +#define XCHAL_WINDOW_VECTORS_PADDR 0x40000000 +#define XCHAL_INTLEVEL2_VECOFS 0x00000180 +#define XCHAL_INTLEVEL2_VECTOR_VADDR 0x40000180 +#define XCHAL_INTLEVEL2_VECTOR_PADDR 0x40000180 +#define XCHAL_INTLEVEL3_VECOFS 0x000001C0 +#define XCHAL_INTLEVEL3_VECTOR_VADDR 0x400001C0 +#define XCHAL_INTLEVEL3_VECTOR_PADDR 0x400001C0 +#define XCHAL_INTLEVEL4_VECOFS 0x00000200 +#define XCHAL_INTLEVEL4_VECTOR_VADDR 0x40000200 +#define XCHAL_INTLEVEL4_VECTOR_PADDR 0x40000200 +#define XCHAL_INTLEVEL5_VECOFS 0x00000240 +#define XCHAL_INTLEVEL5_VECTOR_VADDR 0x40000240 +#define XCHAL_INTLEVEL5_VECTOR_PADDR 0x40000240 +#define XCHAL_INTLEVEL6_VECOFS 0x00000280 +#define XCHAL_INTLEVEL6_VECTOR_VADDR 0x40000280 +#define XCHAL_INTLEVEL6_VECTOR_PADDR 0x40000280 +#define XCHAL_DEBUG_VECOFS XCHAL_INTLEVEL6_VECOFS +#define XCHAL_DEBUG_VECTOR_VADDR XCHAL_INTLEVEL6_VECTOR_VADDR +#define XCHAL_DEBUG_VECTOR_PADDR XCHAL_INTLEVEL6_VECTOR_PADDR +#define XCHAL_NMI_VECOFS 0x000002C0 +#define XCHAL_NMI_VECTOR_VADDR 0x400002C0 +#define XCHAL_NMI_VECTOR_PADDR 0x400002C0 +#define XCHAL_INTLEVEL7_VECOFS XCHAL_NMI_VECOFS +#define XCHAL_INTLEVEL7_VECTOR_VADDR XCHAL_NMI_VECTOR_VADDR +#define XCHAL_INTLEVEL7_VECTOR_PADDR XCHAL_NMI_VECTOR_PADDR + + +/*---------------------------------------------------------------------- + DEBUG MODULE + ----------------------------------------------------------------------*/ + +/* Misc */ +#define XCHAL_HAVE_DEBUG_ERI 1 /* ERI to debug module */ +#define XCHAL_HAVE_DEBUG_APB 0 /* APB to debug module */ +#define XCHAL_HAVE_DEBUG_JTAG 1 /* JTAG to debug module */ + +/* On-Chip Debug (OCD) */ +#define XCHAL_HAVE_OCD 1 /* OnChipDebug option */ +#define XCHAL_NUM_IBREAK 2 /* number of IBREAKn regs */ +#define XCHAL_NUM_DBREAK 2 /* number of DBREAKn regs */ +#define XCHAL_HAVE_OCD_DIR_ARRAY 0 /* faster OCD option (to LX4) */ +#define XCHAL_HAVE_OCD_LS32DDR 1 /* L32DDR/S32DDR (faster OCD) */ + +/* TRAX (in core) */ +#define XCHAL_HAVE_TRAX 1 /* TRAX in debug module */ +#define XCHAL_TRAX_MEM_SIZE 16384 /* TRAX memory size in bytes */ +#define XCHAL_TRAX_MEM_SHAREABLE 1 /* start/end regs; ready sig. */ +#define XCHAL_TRAX_ATB_WIDTH 0 /* ATB width (bits), 0=no ATB */ +#define XCHAL_TRAX_TIME_WIDTH 0 /* timestamp bitwidth, 0=none */ + +/* Perf counters */ +#define XCHAL_NUM_PERF_COUNTERS 2 /* performance counters */ + + +/*---------------------------------------------------------------------- + MMU + ----------------------------------------------------------------------*/ + +/* See core-matmap.h header file for more details. */ + +#define XCHAL_HAVE_TLBS 1 /* inverse of HAVE_CACHEATTR */ +#define XCHAL_HAVE_SPANNING_WAY 1 /* one way maps I+D 4GB vaddr */ +#define XCHAL_SPANNING_WAY 0 /* TLB spanning way number */ +#define XCHAL_HAVE_IDENTITY_MAP 1 /* vaddr == paddr always */ +#define XCHAL_HAVE_CACHEATTR 0 /* CACHEATTR register present */ +#define XCHAL_HAVE_MIMIC_CACHEATTR 1 /* region protection */ +#define XCHAL_HAVE_XLT_CACHEATTR 0 /* region prot. w/translation */ +#define XCHAL_HAVE_PTP_MMU 0 /* full MMU (with page table + [autorefill] and protection) + usable for an MMU-based OS */ + +/* If none of the above last 5 are set, it's a custom TLB configuration. */ + +#define XCHAL_MMU_ASID_BITS 0 /* number of bits in ASIDs */ +#define XCHAL_MMU_RINGS 1 /* number of rings (1..4) */ +#define XCHAL_MMU_RING_BITS 0 /* num of bits in RING field */ + +/*---------------------------------------------------------------------- + MPU + ----------------------------------------------------------------------*/ +#define XCHAL_HAVE_MPU 0 +#define XCHAL_MPU_ENTRIES 0 + +#define XCHAL_MPU_ALIGN_REQ 1 /* MPU requires alignment of entries to background map */ +#define XCHAL_MPU_BACKGROUND_ENTRIES 0 /* number of entries in bg map*/ +#define XCHAL_MPU_BG_CACHEADRDIS 0 /* default CACHEADRDIS for bg */ + +#define XCHAL_MPU_ALIGN_BITS 0 +#define XCHAL_MPU_ALIGN 0 + +#endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */ + + +#endif /* _XTENSA_CORE_CONFIGURATION_H */ diff --git a/arch/xtensa/variants/esp32s3/include/variant/tie-asm.h b/arch/xtensa/variants/esp32s3/include/variant/tie-asm.h new file mode 100644 index 000000000000..104dc10fd414 --- /dev/null +++ b/arch/xtensa/variants/esp32s3/include/variant/tie-asm.h @@ -0,0 +1,429 @@ +/* + * tie-asm.h -- compile-time HAL assembler definitions dependent on CORE & TIE + * + * NOTE: This header file is not meant to be included directly. + */ + +/* This header file contains assembly-language definitions (assembly + macros, etc.) for this specific Xtensa processor's TIE extensions + and options. It is customized to this Xtensa processor configuration. + + Customer ID=15128; Build=0x90f1f; Copyright (c) 1999-2021 Cadence Design Systems Inc. + + Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the + "Software"), to deal in the Software without restriction, including + without limitation the rights to use, copy, modify, merge, publish, + distribute, sublicense, and/or sell copies of the Software, and to + permit persons to whom the Software is furnished to do so, subject to + the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. + IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY + CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE + SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ + +#ifndef _XTENSA_CORE_TIE_ASM_H +#define _XTENSA_CORE_TIE_ASM_H + +/* Selection parameter values for save-area save/restore macros: */ +/* Option vs. TIE: */ +#define XTHAL_SAS_TIE 0x0001 /* custom extension or coprocessor */ +#define XTHAL_SAS_OPT 0x0002 /* optional (and not a coprocessor) */ +#define XTHAL_SAS_ANYOT 0x0003 /* both of the above */ +/* Whether used automatically by compiler: */ +#define XTHAL_SAS_NOCC 0x0004 /* not used by compiler w/o special opts/code */ +#define XTHAL_SAS_CC 0x0008 /* used by compiler without special opts/code */ +#define XTHAL_SAS_ANYCC 0x000C /* both of the above */ +/* ABI handling across function calls: */ +#define XTHAL_SAS_CALR 0x0010 /* caller-saved */ +#define XTHAL_SAS_CALE 0x0020 /* callee-saved */ +#define XTHAL_SAS_GLOB 0x0040 /* global across function calls (in thread) */ +#define XTHAL_SAS_ANYABI 0x0070 /* all of the above three */ +/* Misc */ +#define XTHAL_SAS_ALL 0xFFFF /* include all default NCP contents */ +#define XTHAL_SAS3(optie,ccuse,abi) ( ((optie) & XTHAL_SAS_ANYOT) \ + | ((ccuse) & XTHAL_SAS_ANYCC) \ + | ((abi) & XTHAL_SAS_ANYABI) ) + + + /* + * Macro to store all non-coprocessor (extra) custom TIE and optional state + * (not including zero-overhead loop registers). + * Required parameters: + * ptr Save area pointer address register (clobbered) + * (register must contain a 4 byte aligned address). + * at1..at4 Four temporary address registers (first XCHAL_NCP_NUM_ATMPS + * registers are clobbered, the remaining are unused). + * Optional parameters: + * continue If macro invoked as part of a larger store sequence, set to 1 + * if this is not the first in the sequence. Defaults to 0. + * ofs Offset from start of larger sequence (from value of first ptr + * in sequence) at which to store. Defaults to next available space + * (or 0 if <continue> is 0). + * select Select what category(ies) of registers to store, as a bitmask + * (see XTHAL_SAS_xxx constants). Defaults to all registers. + * alloc Select what category(ies) of registers to allocate; if any + * category is selected here that is not in <select>, space for + * the corresponding registers is skipped without doing any store. + */ + .macro xchal_ncp_store ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0 + xchal_sa_start \continue, \ofs + // Optional global registers used by default by the compiler: + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\select) + xchal_sa_align \ptr, 0, 1016, 4, 4 + rur.THREADPTR \at1 // threadptr option + s32i \at1, \ptr, .Lxchal_ofs_+0 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 4 + .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\alloc)) == 0 + xchal_sa_align \ptr, 0, 1016, 4, 4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 4 + .endif + // Optional caller-saved registers used by default by the compiler: + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\select) + xchal_sa_align \ptr, 0, 1012, 4, 4 + rsr.ACCLO \at1 // MAC16 option + s32i \at1, \ptr, .Lxchal_ofs_+0 + rsr.ACCHI \at1 // MAC16 option + s32i \at1, \ptr, .Lxchal_ofs_+4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 8 + .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\alloc)) == 0 + xchal_sa_align \ptr, 0, 1012, 4, 4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 8 + .endif + // Optional caller-saved registers not used by default by the compiler: + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select) + xchal_sa_align \ptr, 0, 996, 4, 4 + rsr.BR \at1 // boolean option + s32i \at1, \ptr, .Lxchal_ofs_+0 + rsr.SCOMPARE1 \at1 // conditional store option + s32i \at1, \ptr, .Lxchal_ofs_+4 + rsr.M0 \at1 // MAC16 option + s32i \at1, \ptr, .Lxchal_ofs_+8 + rsr.M1 \at1 // MAC16 option + s32i \at1, \ptr, .Lxchal_ofs_+12 + rsr.M2 \at1 // MAC16 option + s32i \at1, \ptr, .Lxchal_ofs_+16 + rsr.M3 \at1 // MAC16 option + s32i \at1, \ptr, .Lxchal_ofs_+20 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 24 + .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0 + xchal_sa_align \ptr, 0, 996, 4, 4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 24 + .endif + .endm // xchal_ncp_store + + /* + * Macro to load all non-coprocessor (extra) custom TIE and optional state + * (not including zero-overhead loop registers). + * Required parameters: + * ptr Save area pointer address register (clobbered) + * (register must contain a 4 byte aligned address). + * at1..at4 Four temporary address registers (first XCHAL_NCP_NUM_ATMPS + * registers are clobbered, the remaining are unused). + * Optional parameters: + * continue If macro invoked as part of a larger load sequence, set to 1 + * if this is not the first in the sequence. Defaults to 0. + * ofs Offset from start of larger sequence (from value of first ptr + * in sequence) at which to load. Defaults to next available space + * (or 0 if <continue> is 0). + * select Select what category(ies) of registers to load, as a bitmask + * (see XTHAL_SAS_xxx constants). Defaults to all registers. + * alloc Select what category(ies) of registers to allocate; if any + * category is selected here that is not in <select>, space for + * the corresponding registers is skipped without doing any load. + */ + .macro xchal_ncp_load ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0 + xchal_sa_start \continue, \ofs + // Optional global registers used by default by the compiler: + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\select) + xchal_sa_align \ptr, 0, 1016, 4, 4 + l32i \at1, \ptr, .Lxchal_ofs_+0 + wur.THREADPTR \at1 // threadptr option + .set .Lxchal_ofs_, .Lxchal_ofs_ + 4 + .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\alloc)) == 0 + xchal_sa_align \ptr, 0, 1016, 4, 4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 4 + .endif + // Optional caller-saved registers used by default by the compiler: + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\select) + xchal_sa_align \ptr, 0, 1012, 4, 4 + l32i \at1, \ptr, .Lxchal_ofs_+0 + wsr.ACCLO \at1 // MAC16 option + l32i \at1, \ptr, .Lxchal_ofs_+4 + wsr.ACCHI \at1 // MAC16 option + .set .Lxchal_ofs_, .Lxchal_ofs_ + 8 + .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\alloc)) == 0 + xchal_sa_align \ptr, 0, 1012, 4, 4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 8 + .endif + // Optional caller-saved registers not used by default by the compiler: + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select) + xchal_sa_align \ptr, 0, 996, 4, 4 + l32i \at1, \ptr, .Lxchal_ofs_+0 + wsr.BR \at1 // boolean option + l32i \at1, \ptr, .Lxchal_ofs_+4 + wsr.SCOMPARE1 \at1 // conditional store option + l32i \at1, \ptr, .Lxchal_ofs_+8 + wsr.M0 \at1 // MAC16 option + l32i \at1, \ptr, .Lxchal_ofs_+12 + wsr.M1 \at1 // MAC16 option + l32i \at1, \ptr, .Lxchal_ofs_+16 + wsr.M2 \at1 // MAC16 option + l32i \at1, \ptr, .Lxchal_ofs_+20 + wsr.M3 \at1 // MAC16 option + .set .Lxchal_ofs_, .Lxchal_ofs_ + 24 + .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0 + xchal_sa_align \ptr, 0, 996, 4, 4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 24 + .endif + .endm // xchal_ncp_load + + +#define XCHAL_NCP_NUM_ATMPS 1 + + /* + * Macro to store the state of TIE coprocessor FPU. + * Required parameters: + * ptr Save area pointer address register (clobbered) + * (register must contain a 4 byte aligned address). + * at1..at4 Four temporary address registers (first XCHAL_CP0_NUM_ATMPS + * registers are clobbered, the remaining are unused). + * Optional parameters are the same as for xchal_ncp_store. + */ +#define xchal_cp_FPU_store xchal_cp0_store + .macro xchal_cp0_store ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0 + xchal_sa_start \continue, \ofs + // Custom caller-saved registers not used by default by the compiler: + .ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select) + xchal_sa_align \ptr, 0, 948, 4, 4 + rur.FCR \at1 // ureg 232 + s32i \at1, \ptr, .Lxchal_ofs_+0 + rur.FSR \at1 // ureg 233 + s32i \at1, \ptr, .Lxchal_ofs_+4 + ssi f0, \ptr, .Lxchal_ofs_+8 + ssi f1, \ptr, .Lxchal_ofs_+12 + ssi f2, \ptr, .Lxchal_ofs_+16 + ssi f3, \ptr, .Lxchal_ofs_+20 + ssi f4, \ptr, .Lxchal_ofs_+24 + ssi f5, \ptr, .Lxchal_ofs_+28 + ssi f6, \ptr, .Lxchal_ofs_+32 + ssi f7, \ptr, .Lxchal_ofs_+36 + ssi f8, \ptr, .Lxchal_ofs_+40 + ssi f9, \ptr, .Lxchal_ofs_+44 + ssi f10, \ptr, .Lxchal_ofs_+48 + ssi f11, \ptr, .Lxchal_ofs_+52 + ssi f12, \ptr, .Lxchal_ofs_+56 + ssi f13, \ptr, .Lxchal_ofs_+60 + ssi f14, \ptr, .Lxchal_ofs_+64 + ssi f15, \ptr, .Lxchal_ofs_+68 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 72 + .elseif ((XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0 + xchal_sa_align \ptr, 0, 948, 4, 4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 72 + .endif + .endm // xchal_cp0_store + + /* + * Macro to load the state of TIE coprocessor FPU. + * Required parameters: + * ptr Save area pointer address register (clobbered) + * (register must contain a 4 byte aligned address). + * at1..at4 Four temporary address registers (first XCHAL_CP0_NUM_ATMPS + * registers are clobbered, the remaining are unused). + * Optional parameters are the same as for xchal_ncp_load. + */ +#define xchal_cp_FPU_load xchal_cp0_load + .macro xchal_cp0_load ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0 + xchal_sa_start \continue, \ofs + // Custom caller-saved registers not used by default by the compiler: + .ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select) + xchal_sa_align \ptr, 0, 948, 4, 4 + l32i \at1, \ptr, .Lxchal_ofs_+0 + wur.FCR \at1 // ureg 232 + l32i \at1, \ptr, .Lxchal_ofs_+4 + wur.FSR \at1 // ureg 233 + lsi f0, \ptr, .Lxchal_ofs_+8 + lsi f1, \ptr, .Lxchal_ofs_+12 + lsi f2, \ptr, .Lxchal_ofs_+16 + lsi f3, \ptr, .Lxchal_ofs_+20 + lsi f4, \ptr, .Lxchal_ofs_+24 + lsi f5, \ptr, .Lxchal_ofs_+28 + lsi f6, \ptr, .Lxchal_ofs_+32 + lsi f7, \ptr, .Lxchal_ofs_+36 + lsi f8, \ptr, .Lxchal_ofs_+40 + lsi f9, \ptr, .Lxchal_ofs_+44 + lsi f10, \ptr, .Lxchal_ofs_+48 + lsi f11, \ptr, .Lxchal_ofs_+52 + lsi f12, \ptr, .Lxchal_ofs_+56 + lsi f13, \ptr, .Lxchal_ofs_+60 + lsi f14, \ptr, .Lxchal_ofs_+64 + lsi f15, \ptr, .Lxchal_ofs_+68 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 72 + .elseif ((XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0 + xchal_sa_align \ptr, 0, 948, 4, 4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 72 + .endif + .endm // xchal_cp0_load + +#define XCHAL_CP0_NUM_ATMPS 1 + /* + * Macro to store the state of TIE coprocessor cop_ai. + * Required parameters: + * ptr Save area pointer address register (clobbered) + * (register must contain a 16 byte aligned address). + * at1..at4 Four temporary address registers (first XCHAL_CP3_NUM_ATMPS + * registers are clobbered, the remaining are unused). + * Optional parameters are the same as for xchal_ncp_store. + */ +#define xchal_cp_cop_ai_store xchal_cp3_store + .macro xchal_cp3_store ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0 + xchal_sa_start \continue, \ofs + // Custom caller-saved registers not used by default by the compiler: + .ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select) + xchal_sa_align \ptr, 0, 0, 16, 16 + rur.ACCX_0 \at1 // ureg 0 + s32i \at1, \ptr, .Lxchal_ofs_+0 + rur.ACCX_1 \at1 // ureg 1 + s32i \at1, \ptr, .Lxchal_ofs_+4 + rur.QACC_H_0 \at1 // ureg 2 + s32i \at1, \ptr, .Lxchal_ofs_+8 + rur.QACC_H_1 \at1 // ureg 3 + s32i \at1, \ptr, .Lxchal_ofs_+12 + rur.QACC_H_2 \at1 // ureg 4 + s32i \at1, \ptr, .Lxchal_ofs_+16 + rur.QACC_H_3 \at1 // ureg 5 + s32i \at1, \ptr, .Lxchal_ofs_+20 + rur.QACC_H_4 \at1 // ureg 6 + s32i \at1, \ptr, .Lxchal_ofs_+24 + rur.QACC_L_0 \at1 // ureg 7 + s32i \at1, \ptr, .Lxchal_ofs_+28 + rur.QACC_L_1 \at1 // ureg 8 + s32i \at1, \ptr, .Lxchal_ofs_+32 + rur.QACC_L_2 \at1 // ureg 9 + s32i \at1, \ptr, .Lxchal_ofs_+36 + rur.QACC_L_3 \at1 // ureg 10 + s32i \at1, \ptr, .Lxchal_ofs_+40 + rur.QACC_L_4 \at1 // ureg 11 + s32i \at1, \ptr, .Lxchal_ofs_+44 + rur.SAR_BYTE \at1 // ureg 13 + s32i \at1, \ptr, .Lxchal_ofs_+48 + rur.FFT_BIT_WIDTH \at1 // ureg 14 + s32i \at1, \ptr, .Lxchal_ofs_+52 + rur.UA_STATE_0 \at1 // ureg 15 + s32i \at1, \ptr, .Lxchal_ofs_+56 + rur.UA_STATE_1 \at1 // ureg 16 + s32i \at1, \ptr, .Lxchal_ofs_+60 + rur.UA_STATE_2 \at1 // ureg 17 + s32i \at1, \ptr, .Lxchal_ofs_+64 + rur.UA_STATE_3 \at1 // ureg 18 + s32i \at1, \ptr, .Lxchal_ofs_+68 + st.qr q0, \ptr, .Lxchal_ofs_+80 + st.qr q1, \ptr, .Lxchal_ofs_+96 + st.qr q2, \ptr, .Lxchal_ofs_+112 + addi \ptr, \ptr, 128 + st.qr q3, \ptr, .Lxchal_ofs_+0 + st.qr q4, \ptr, .Lxchal_ofs_+16 + st.qr q5, \ptr, .Lxchal_ofs_+32 + st.qr q6, \ptr, .Lxchal_ofs_+48 + st.qr q7, \ptr, .Lxchal_ofs_+64 + .set .Lxchal_pofs_, .Lxchal_pofs_ + 128 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 80 + .elseif ((XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0 + xchal_sa_align \ptr, 0, 0, 16, 16 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 208 + .endif + .endm // xchal_cp3_store + + /* + * Macro to load the state of TIE coprocessor cop_ai. + * Required parameters: + * ptr Save area pointer address register (clobbered) + * (register must contain a 16 byte aligned address). + * at1..at4 Four temporary address registers (first XCHAL_CP3_NUM_ATMPS + * registers are clobbered, the remaining are unused). + * Optional parameters are the same as for xchal_ncp_load. + */ +#define xchal_cp_cop_ai_load xchal_cp3_load + .macro xchal_cp3_load ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0 + xchal_sa_start \continue, \ofs + // Custom caller-saved registers not used by default by the compiler: + .ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select) + xchal_sa_align \ptr, 0, 0, 16, 16 + l32i \at1, \ptr, .Lxchal_ofs_+0 + wur.ACCX_0 \at1 // ureg 0 + l32i \at1, \ptr, .Lxchal_ofs_+4 + wur.ACCX_1 \at1 // ureg 1 + l32i \at1, \ptr, .Lxchal_ofs_+8 + wur.QACC_H_0 \at1 // ureg 2 + l32i \at1, \ptr, .Lxchal_ofs_+12 + wur.QACC_H_1 \at1 // ureg 3 + l32i \at1, \ptr, .Lxchal_ofs_+16 + wur.QACC_H_2 \at1 // ureg 4 + l32i \at1, \ptr, .Lxchal_ofs_+20 + wur.QACC_H_3 \at1 // ureg 5 + l32i \at1, \ptr, .Lxchal_ofs_+24 + wur.QACC_H_4 \at1 // ureg 6 + l32i \at1, \ptr, .Lxchal_ofs_+28 + wur.QACC_L_0 \at1 // ureg 7 + l32i \at1, \ptr, .Lxchal_ofs_+32 + wur.QACC_L_1 \at1 // ureg 8 + l32i \at1, \ptr, .Lxchal_ofs_+36 + wur.QACC_L_2 \at1 // ureg 9 + l32i \at1, \ptr, .Lxchal_ofs_+40 + wur.QACC_L_3 \at1 // ureg 10 + l32i \at1, \ptr, .Lxchal_ofs_+44 + wur.QACC_L_4 \at1 // ureg 11 + l32i \at1, \ptr, .Lxchal_ofs_+48 + wur.SAR_BYTE \at1 // ureg 13 + l32i \at1, \ptr, .Lxchal_ofs_+52 + wur.FFT_BIT_WIDTH \at1 // ureg 14 + l32i \at1, \ptr, .Lxchal_ofs_+56 + wur.UA_STATE_0 \at1 // ureg 15 + l32i \at1, \ptr, .Lxchal_ofs_+60 + wur.UA_STATE_1 \at1 // ureg 16 + l32i \at1, \ptr, .Lxchal_ofs_+64 + wur.UA_STATE_2 \at1 // ureg 17 + l32i \at1, \ptr, .Lxchal_ofs_+68 + wur.UA_STATE_3 \at1 // ureg 18 + ld.qr q0, \ptr, .Lxchal_ofs_+80 + ld.qr q1, \ptr, .Lxchal_ofs_+96 + ld.qr q2, \ptr, .Lxchal_ofs_+112 + addi \ptr, \ptr, 128 + ld.qr q3, \ptr, .Lxchal_ofs_+0 + ld.qr q4, \ptr, .Lxchal_ofs_+16 + ld.qr q5, \ptr, .Lxchal_ofs_+32 + ld.qr q6, \ptr, .Lxchal_ofs_+48 + ld.qr q7, \ptr, .Lxchal_ofs_+64 + .set .Lxchal_pofs_, .Lxchal_pofs_ + 128 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 80 + .elseif ((XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0 + xchal_sa_align \ptr, 0, 0, 16, 16 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 208 + .endif + .endm // xchal_cp3_load + +#define XCHAL_CP3_NUM_ATMPS 1 +#define XCHAL_SA_NUM_ATMPS 1 + + /* Empty macros for unconfigured coprocessors: */ + .macro xchal_cp1_store p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp1_load p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp2_store p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp2_load p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp4_store p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp4_load p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp5_store p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp5_load p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp6_store p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp6_load p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp7_store p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp7_load p a b c d continue=0 ofs=-1 select=-1 ; .endm + +#endif /*_XTENSA_CORE_TIE_ASM_H*/ diff --git a/arch/xtensa/variants/esp32s3/include/variant/tie.h b/arch/xtensa/variants/esp32s3/include/variant/tie.h new file mode 100644 index 000000000000..e7671b1979e4 --- /dev/null +++ b/arch/xtensa/variants/esp32s3/include/variant/tie.h @@ -0,0 +1,207 @@ +/* + * tie.h -- compile-time HAL definitions dependent on CORE & TIE configuration + * + * NOTE: This header file is not meant to be included directly. + */ + +/* This header file describes this specific Xtensa processor's TIE extensions + that extend basic Xtensa core functionality. It is customized to this + Xtensa processor configuration. + + Customer ID=15128; Build=0x90f1f; Copyright (c) 1999-2021 Cadence Design Systems Inc. + + Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the + "Software"), to deal in the Software without restriction, including + without limitation the rights to use, copy, modify, merge, publish, + distribute, sublicense, and/or sell copies of the Software, and to + permit persons to whom the Software is furnished to do so, subject to + the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. + IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY + CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE + SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ + +#ifndef _XTENSA_CORE_TIE_H +#define _XTENSA_CORE_TIE_H + +#define XCHAL_CP_NUM 2 /* number of coprocessors */ +#define XCHAL_CP_MAX 4 /* max CP ID + 1 (0 if none) */ +#define XCHAL_CP_MASK 0x09 /* bitmask of all CPs by ID */ +#define XCHAL_CP_PORT_MASK 0x00 /* bitmask of only port CPs */ + +/* Basic parameters of each coprocessor: */ +#define XCHAL_CP0_NAME "FPU" +#define XCHAL_CP0_IDENT FPU +#define XCHAL_CP0_SA_SIZE 72 /* size of state save area */ +#define XCHAL_CP0_SA_ALIGN 4 /* min alignment of save area */ +#define XCHAL_CP_ID_FPU 0 /* coprocessor ID (0..7) */ +#define XCHAL_CP3_NAME "cop_ai" +#define XCHAL_CP3_IDENT cop_ai +#define XCHAL_CP3_SA_SIZE 208 /* size of state save area */ +#define XCHAL_CP3_SA_ALIGN 16 /* min alignment of save area */ +#define XCHAL_CP_ID_COP_AI 3 /* coprocessor ID (0..7) */ + +/* Filler info for unassigned coprocessors, to simplify arrays etc: */ +#define XCHAL_CP1_SA_SIZE 0 +#define XCHAL_CP1_SA_ALIGN 1 +#define XCHAL_CP2_SA_SIZE 0 +#define XCHAL_CP2_SA_ALIGN 1 +#define XCHAL_CP4_SA_SIZE 0 +#define XCHAL_CP4_SA_ALIGN 1 +#define XCHAL_CP5_SA_SIZE 0 +#define XCHAL_CP5_SA_ALIGN 1 +#define XCHAL_CP6_SA_SIZE 0 +#define XCHAL_CP6_SA_ALIGN 1 +#define XCHAL_CP7_SA_SIZE 0 +#define XCHAL_CP7_SA_ALIGN 1 + +/* Save area for non-coprocessor optional and custom (TIE) state: */ +#define XCHAL_NCP_SA_SIZE 36 +#define XCHAL_NCP_SA_ALIGN 4 + +/* Total save area for optional and custom state (NCP + CPn): */ +#define XCHAL_TOTAL_SA_SIZE 336 /* with 16-byte align padding */ +#define XCHAL_TOTAL_SA_ALIGN 16 /* actual minimum alignment */ + +/* + * Detailed contents of save areas. + * NOTE: caller must define the XCHAL_SA_REG macro (not defined here) + * before expanding the XCHAL_xxx_SA_LIST() macros. + * + * XCHAL_SA_REG(s,ccused,abikind,kind,opt,name,galign,align,asize, + * dbnum,base,regnum,bitsz,gapsz,reset,x...) + * + * s = passed from XCHAL_*_LIST(s), eg. to select how to expand + * ccused = set if used by compiler without special options or code + * abikind = 0 (caller-saved), 1 (callee-saved), or 2 (thread-global) + * kind = 0 (special reg), 1 (TIE user reg), or 2 (TIE regfile reg) + * opt = 0 (custom TIE extension or coprocessor), or 1 (optional reg) + * name = lowercase reg name (no quotes) + * galign = group byte alignment (power of 2) (galign >= align) + * align = register byte alignment (power of 2) + * asize = allocated size in bytes (asize*8 == bitsz + gapsz + padsz) + * (not including any pad bytes required to galign this or next reg) + * dbnum = unique target number f/debug (see <xtensa-libdb-macros.h>) + * base = reg shortname w/o index (or sr=special, ur=TIE user reg) + * regnum = reg index in regfile, or special/TIE-user reg number + * bitsz = number of significant bits (regfile width, or ur/sr mask bits) + * gapsz = intervening bits, if bitsz bits not stored contiguously + * (padsz = pad bits at end [TIE regfile] or at msbits [ur,sr] of asize) + * reset = register reset value (or 0 if undefined at reset) + * x = reserved for future use (0 until then) + * + * To filter out certain registers, e.g. to expand only the non-global + * registers used by the compiler, you can do something like this: + * + * #define XCHAL_SA_REG(s,ccused,p...) SELCC##ccused(p) + * #define SELCC0(p...) + * #define SELCC1(abikind,p...) SELAK##abikind(p) + * #define SELAK0(p...) REG(p) + * #define SELAK1(p...) REG(p) + * #define SELAK2(p...) + * #define REG(kind,tie,name,galn,aln,asz,csz,dbnum,base,rnum,bsz,rst,x...) \ + * ...what you want to expand... + */ + +#define XCHAL_NCP_SA_NUM 9 +#define XCHAL_NCP_SA_LIST(s) \ + XCHAL_SA_REG(s,1,2,1,1, threadptr, 4, 4, 4,0x03E7, ur,231, 32,0,0,0) \ + XCHAL_SA_REG(s,1,0,0,1, acclo, 4, 4, 4,0x0210, sr,16 , 32,0,0,0) \ + XCHAL_SA_REG(s,1,0,0,1, acchi, 4, 4, 4,0x0211, sr,17 , 8,0,0,0) \ + XCHAL_SA_REG(s,0,0,0,1, br, 4, 4, 4,0x0204, sr,4 , 16,0,0,0) \ + XCHAL_SA_REG(s,0,0,0,1, scompare1, 4, 4, 4,0x020C, sr,12 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,0,1, m0, 4, 4, 4,0x0220, sr,32 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,0,1, m1, 4, 4, 4,0x0221, sr,33 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,0,1, m2, 4, 4, 4,0x0222, sr,34 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,0,1, m3, 4, 4, 4,0x0223, sr,35 , 32,0,0,0) + +#define XCHAL_CP0_SA_NUM 18 +#define XCHAL_CP0_SA_LIST(s) \ + XCHAL_SA_REG(s,0,0,1,0, fcr, 4, 4, 4,0x03E8, ur,232, 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, fsr, 4, 4, 4,0x03E9, ur,233, 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, f0, 4, 4, 4,0x0030, f,0 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, f1, 4, 4, 4,0x0031, f,1 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, f2, 4, 4, 4,0x0032, f,2 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, f3, 4, 4, 4,0x0033, f,3 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, f4, 4, 4, 4,0x0034, f,4 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, f5, 4, 4, 4,0x0035, f,5 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, f6, 4, 4, 4,0x0036, f,6 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, f7, 4, 4, 4,0x0037, f,7 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, f8, 4, 4, 4,0x0038, f,8 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, f9, 4, 4, 4,0x0039, f,9 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, f10, 4, 4, 4,0x003A, f,10 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, f11, 4, 4, 4,0x003B, f,11 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, f12, 4, 4, 4,0x003C, f,12 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, f13, 4, 4, 4,0x003D, f,13 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, f14, 4, 4, 4,0x003E, f,14 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, f15, 4, 4, 4,0x003F, f,15 , 32,0,0,0) + +#define XCHAL_CP1_SA_NUM 0 +#define XCHAL_CP1_SA_LIST(s) /* empty */ + +#define XCHAL_CP2_SA_NUM 0 +#define XCHAL_CP2_SA_LIST(s) /* empty */ + +#define XCHAL_CP3_SA_NUM 26 +#define XCHAL_CP3_SA_LIST(s) \ + XCHAL_SA_REG(s,0,0,1,0, accx_0,16, 4, 4,0x0300, ur,0 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, accx_1, 4, 4, 4,0x0301, ur,1 , 8,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, qacc_h_0, 4, 4, 4,0x0302, ur,2 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, qacc_h_1, 4, 4, 4,0x0303, ur,3 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, qacc_h_2, 4, 4, 4,0x0304, ur,4 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, qacc_h_3, 4, 4, 4,0x0305, ur,5 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, qacc_h_4, 4, 4, 4,0x0306, ur,6 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, qacc_l_0, 4, 4, 4,0x0307, ur,7 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, qacc_l_1, 4, 4, 4,0x0308, ur,8 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, qacc_l_2, 4, 4, 4,0x0309, ur,9 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, qacc_l_3, 4, 4, 4,0x030A, ur,10 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, qacc_l_4, 4, 4, 4,0x030B, ur,11 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, sar_byte, 4, 4, 4,0x030D, ur,13 , 4,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, fft_bit_width, 4, 4, 4,0x030E, ur,14 , 4,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, ua_state_0, 4, 4, 4,0x030F, ur,15 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, ua_state_1, 4, 4, 4,0x0310, ur,16 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, ua_state_2, 4, 4, 4,0x0311, ur,17 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, ua_state_3, 4, 4, 4,0x0312, ur,18 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, q0,16,16,16,0x1008, q,0 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, q1,16,16,16,0x1009, q,1 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, q2,16,16,16,0x100A, q,2 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, q3,16,16,16,0x100B, q,3 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, q4,16,16,16,0x100C, q,4 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, q5,16,16,16,0x100D, q,5 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, q6,16,16,16,0x100E, q,6 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, q7,16,16,16,0x100F, q,7 ,128,0,0,0) + +#define XCHAL_CP4_SA_NUM 0 +#define XCHAL_CP4_SA_LIST(s) /* empty */ + +#define XCHAL_CP5_SA_NUM 0 +#define XCHAL_CP5_SA_LIST(s) /* empty */ + +#define XCHAL_CP6_SA_NUM 0 +#define XCHAL_CP6_SA_LIST(s) /* empty */ + +#define XCHAL_CP7_SA_NUM 0 +#define XCHAL_CP7_SA_LIST(s) /* empty */ + +/* Byte length of instruction from its first nibble (op0 field), per FLIX. */ +#define XCHAL_OP0_FORMAT_LENGTHS 3,3,3,3,3,3,3,3,2,2,2,2,2,2,4,4 +/* Byte length of instruction from its first byte, per FLIX. */ +#define XCHAL_BYTE0_FORMAT_LENGTHS \ + 3,3,3,3,3,3,3,3,2,2,2,2,2,2,4,4, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,4,4,\ + 3,3,3,3,3,3,3,3,2,2,2,2,2,2,4,4, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,4,4,\ + 3,3,3,3,3,3,3,3,2,2,2,2,2,2,4,4, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,4,4,\ + 3,3,3,3,3,3,3,3,2,2,2,2,2,2,4,4, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,4,4,\ + 3,3,3,3,3,3,3,3,2,2,2,2,2,2,4,4, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,4,4,\ + 3,3,3,3,3,3,3,3,2,2,2,2,2,2,4,4, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,4,4,\ + 3,3,3,3,3,3,3,3,2,2,2,2,2,2,4,4, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,4,4,\ + 3,3,3,3,3,3,3,3,2,2,2,2,2,2,4,4, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,4,4 + +#endif /*_XTENSA_CORE_TIE_H*/ -- 2.30.2
Powered by blists - more mailing lists