lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <8596fd5e-035b-b7be-3588-c07f27d1f38f@collabora.com>
Date:   Thu, 14 Sep 2023 12:02:53 +0200
From:   AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...labora.com>
To:     Macpaul Lin <macpaul.lin@...iatek.com>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Matthias Brugger <matthias.bgg@...il.com>,
        Bernhard Rosenkränzer <bero@...libre.com>,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        linux-mediatek@...ts.infradead.org
Cc:     Bear Wang <bear.wang@...iatek.com>,
        Pablo Sun <pablo.sun@...iatek.com>,
        Macpaul Lin <macpaul@...il.com>,
        Chris-QJ Chen <chris-qj.chen@...iatek.com>
Subject: Re: [PATCH v3 2/2] arm64: dts: mediatek: add device-tree for Genio
 700 EVK board

Il 14/09/23 08:18, Macpaul Lin ha scritto:
> Add basic device-tree for the Genio 700 EVK board. The
> Genio 700 EVK is based on MediaTek MT8390 SoC.
> MT8390 hardware register maps are identical to MT8188.
> 
> The Genio 700 EVK has following features:
> 
> - MT8390 SoC
> - MT6365 PMIC
> - MT6319 Buck IC
> - 12V DC Jack
> - 2x4GB LPDDR4X
> - 64GB eMMC 5.1
> - 64Mb SPI NOR
> - M.2 Key A-E slot with PCIe Gen2 and USB 2.0
> - 2x DSI LCM ports
> - 2x touch sensor ports
> - 2x MIPI-CSI, as camera daughter board slots
> - USB 2 micro USB connector
> - USB 3 with 1 to 2 hub:
>    - M.2 Key B slot
>    - Type-C connector, with DisplayPort over Type-C
> - HDMI 2.0 TX port with Type A HDMI connector
> - eDP port
> - Gigabit Ethernet with RJ45 connector
> - SD card slot
> - Earphone Jack
> - Analog Microphone
> - 2x Digital Microphone
> - 3x UART with serial-to-usb converters and micro USB connectors
> 
> Signed-off-by: Chris-QJ Chen <chris-qj.chen@...iatek.com>
> Signed-off-by: Pablo Sun <pablo.sun@...iatek.com>
> Signed-off-by: Macpaul Lin <macpaul.lin@...iatek.com>
> ---
>   arch/arm64/boot/dts/mediatek/Makefile         |   1 +
>   .../dts/mediatek/mt8390-genio-700-evk.dts     | 880 ++++++++++++++++++
>   2 files changed, 881 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts
> 
> dependencies for v1:
>   - This patch should be applied after the following patch set
>    - mt8365-gneio-350-evk's dts change (v4)
>     - https://lore.kernel.org/linux-arm-kernel/20230912092444.31635-1-macpaul.lin@mediatek.com/T/
>    - mt8395-genio-1200-evk's dts basic support (v6)
>     - https://lore.kernel.org/lkml/20230911115717.26184-1-macpaul.lin@mediatek.com/T/
>    - mt8188 platform's basic support
>     - https://lore.kernel.org/lkml/a4e1a80ebd19896410f50b0297e05dce06fb47cc.camel@mediatek.com/T/
> 
> changes for v2:
>   - Fix gpio defines '0' to 'GPIO_ACTIVE_HIGH'.
>   - Drop duplicate name: 'default' for I2C4.
>   - Update dependencies
>    - mt8365-gneio-350-evk's dts change (v5)
>     - https://lore.kernel.org/lkml/20230913032226.4092-1-macpaul.lin@mediatek.com/
>    - mt8395-genio-1200-evk's dts basic support (v7)
>     - https://lore.kernel.org/linux-arm-kernel/20230913032057.3197-1-macpaul.lin@mediatek.com/T/
>    - mt8188 platform's basic support (v4)
>     - https://lore.kernel.org/lkml/a4e1a80ebd19896410f50b0297e05dce06fb47cc.camel@mediatek.com/T/
> 
> changes for v3:
>   - No change.
>   - Update dependencies
>    - mt8365-gneio-350-evk's dts change (v5)
>     - https://lore.kernel.org/lkml/20230913032226.4092-1-macpaul.lin@mediatek.com/
>    - mt8395-genio-1200-evk's dts basic support (v8)
>     - https://lore.kernel.org/lkml/20230914055145.16801-1-macpaul.lin@mediatek.com/T/
>    - mt8188 platform's basic support (v4)
>     - https://lore.kernel.org/lkml/a4e1a80ebd19896410f50b0297e05dce06fb47cc.camel@mediatek.com/T/
> 
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index 22f362bbbdac..3262849c0f6b 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -54,5 +54,6 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r3.dtb
>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb
>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-genio-350-evk.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8390-genio-700-evk.dtb
>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-genio-1200-evk.dtb
>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts
> new file mode 100644
> index 000000000000..ed6bbf0c15cc
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts
> @@ -0,0 +1,880 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (C) 2023 MediaTek Inc.
> + * Author: Chris Chen <chris-qj.chen@...iatek.com>
> + *	   Pablo Sun <pablo.sun@...iatek.com>
> + *	   Macpaul Lin <macpaul.lin@...iatek.com>
> + */
> +/dts-v1/;
> +
> +#include "mt8188.dtsi"
> +#include "mt6359.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
> +#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
> +#include <dt-bindings/spmi/spmi.h>
> +#include <dt-bindings/usb/pd.h>
> +
> +/ {
> +	model = "MediaTek Genio-700 EVK";
> +	compatible = "mediatek,mt8390-evk", "mediatek,mt8390",
> +		     "mediatek,mt8188";
> +

..snip..

> +
> +&i2c0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c0_pins>;
> +	clock-frequency = <400000>;
> +	status = "okay";
> +
> +	touchscreen@5d {
> +		compatible = "goodix,gt9271";
> +		reg = <0x5d>;
> +		interrupt-parent = <&pio>;
> +		interrupts = <6 IRQ_TYPE_EDGE_RISING>;

interrupts-extended = <&pio 7 IRQ_TYPE_EDGE_RISING>;

after which:

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ